PC2L
2 Button - Remote Control
Designed specifically for use with remote control valves
1/8" Port
Part: 005-950
Choose your option
PC2M
2 Button - Remote Control
Designed specifically for use with remote control valves
1/8" Port
Part: 005-906
Marine Grade - Corrosion Resistant
Choose your option
PC4L
4 Button - Remote Control
Designed specifically for use with remote control valves
1/8" Port
Part: 005-957
Choose your option
PC4M
4 Button - Remote Control
Designed specifically for use with remote control valves
1/8" Port
Part: 005-907
Marine Grade - Corrosion Resistant
Choose your option
PC6L
6 Button - Remote Control
Designed specifically for use with remote control valves
1/8" Port
Part: 005-958
Choose your option
PC6M
6 Button - Remote Control
Designed specifically for use with remote control valves
1/8" Port
Part: 005-908
Marine Grade - Corrosion Resistant
Choose your option
PFA Series
PFA Series
Position Feedback Cylinders
The PFA Series is an economical
pneumatic linear actuator that contains
an internal Linear Resistive Transducer
(LRT). It is ideal for applications where
traditional magnetic position sensing is
not acceptable. Additionally, the PFA
Series is conducive where variations in
cylinder stroke and speed are required
or where an application calls for
continuous position monitoring.
• Operating pressure: 150 psi max.
• Recommended Media: Filtered, clean,
dry “non-condensing” compressed air.
Do not apply any fluids that may be
electrically conductive. Water-based
fluids should not be used.
Choose your option
Pick Up Truck Tank
The Pick-up truck tank is dedicated to the transport of water (or hydrocarbon) on board vehicles or skips.
It is mainly used for refueling in remote areas (military or humanitarian). This type of tank can also be used to facilitate access to a water point quickly (irrigation, agriculture…).
It is manufactured in parallelepiped shape from PVC fabric and assembled by high frequency welding.
This range of Pick-up truck tank is equipped with flexible interior partitions from a capacity of 1500 liters. Thus, the movement of liquids is reduced, and the stability of the vehicle is ensured.
In addition, this tank is lightweight, so it is easily transportable, foldable and unfoldable.
This flexible tank for pickup trucks can be custom-made to fit your vehicle!
Choose your option
PIPE TEST PLUG- OTR
Pronal’s pipe test plug OTR is designed to test the tightness of inspection wells that are found in waste-water systems. Flexible and light, you can easily integrate it in the sewerage network. Moreover, its execution is very fast.
Whatever the diameter of the pipe, the height of the sealing balloons is 200 mm. This allows a simple and fast use in narrow spaces.
Thanks to a double-walled fabric and a hot vulcanization in the autoclave, the pipe test plug allows a perfect seal. It also offers a high resistance to wear and tear and therefore a long service life.
In addition, the pipe plug is equipped with through walls for pressurization, intended for manhole tightness tests.
In the range of inflatable pipe plugs dedicated to sanitation, there is also the standard inflatable pipe plug OPL.
Choose your option
Pneumatic Fittings
Captured Seals – Dynamco fittings have their seals already installed on the fitting thread. This feature offers significant time savings, eliminating the need to install seals upon receipt or during installation.
Mechanical Stop – The thread and seal design allows the user to tighten the fitting (5.5 in–lb ± 0.5) without cutting or damaging the seal. This seal “squeeze” is controlled by the undercut cavity, allowing the seal to be used an infinite number of times, without wear or damage.
Single Barb – The tapered nose of Dynamco's single barb fitting eases installation, but also ensures more positive sealing and holding of pneumatic tubing.
Electroless Nickel Plating – While standard brass fittings work in most applications, several Dynamco fittings are now available with electroless nickel plating. This catalog outlines where plating is offered as an option by listing a “P” at the beginning of the part number.
Stainless Steel Check Valves & Flow Controls – Dynamco's check valves and flow controls are now also available in Stainless Steel.
Elimination of Unnecessary Fittings – It is possible, in many cases, to replace two ordinary fittings with just one Dynamco fitting, simplifying connections and minimizing cost.
Variety – Dynamco offers a full line of tees, elbows and connectors, allowing you to complete virtually any job with miniature sized tubing.
Tubing – Dynamco offers polyurethane tubing in black and clear colors. Two sizes of tubing are available. The smaller tubing (1/16" ID x 1/8" OD) is used for interconnection between logic components, for communication with power valve pilots and limit valves, and for all other connections not requiring a high flow. The larger tubing (1/8" ID x 1/4" OD) is used for control air supply lines and with valves
Choose your option
Pneumatic Moulded Gripper – MCP
The pneumatic moulded gripper range is fitted with a strip along their entire length that adapts to the complex shape of the bottle rings. Several diameters can be performed to adapt to the different volumes.
Standard lengths are 1320 mm and 1460 mm. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
In addition, to meet quality requirements, the grippers are available with food-safe material coating on request. Depending on your installation, the pneumatic moulded gripper will be adapted with reinforcing, a threaded ring height, etc.
Finally, for long neck bottles you can find the range of pneumatic tube gripper.
Choose your option
Pneumatic Tube Gripper Long Neck - MC/ML
The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.
The standard lengths are 1320 mm and 1460 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Pneumatic Tube Gripper Short Neck - MCC
MCC pneumatic tube gripper short neck range is dedicated to short neck bottles for small quantities, like miniatures. For this type of bottle, there is also the range of half pneumatic bottle gripper. Their thinness when deflated means that they can be inserted easily between the rows of bottles.
Two lengths are available as standard: 1320 mm and 1460 mm. Other dimensions can be tailor-made to match the pallet loading plan.
Our range of pneumatic tube gripper short neck is manufactured in our workshops from NPVC coated fabric and assembled by hot vulcanization in autoclave.
Like for the other inflatable gripper ranges, a food-safe coating can be added on demand. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
Choose your option
Pneumatic tube gripper – MCS
By design, the MCS pneumatic tube gripper range combines the advantages of the double pneumatic bottle gripper MCB range with a more compact height. In addition, for users who need to fill pallets with different size bottles, these grippers can easily replace several models from the pneumatic tube gripper long neck MC range with just one system.
Indeed, its low height fits both long or short neck bottles. The pneumatic tube grippers are widely used to avoid changing grippers between two types of bottles. Only the spacing between the grippers need be changed.
Two lengths are available as standard: 1320 mm and 1460 mm. A food-safe coating can be added to the grippers on request. Depending on your installation, the inflatable rings will be adapted with reinforcing, a threaded ring height, etc.
Choose your option
Pneumatic Vacuum Generators RECBi MATCH
End-of-Arm Ecosystem MATCH
MATCH is the appropriate name for the new multifunctional end-of-arm platform for robotics from the two handling specialists Schmalz and Zimmer Group. Equipped with an extensive function portfolio and universal communication interfaces, MATCH is compatible with any lightweight robot, cobot and with all conventional 6-axis robots on the market.
Pneumatic vacuum generator with quick-change unit for high application diversity and flexible gripper design.
Choose your option
PRP1806
Rotary actuator - PRP Description
• Gripper with integrated rotator: the four sensors and the four hoses do not rotate.
• Optional magnetic sensors.
• Spring closed (-NC) or spring open (-NO) option available upon request.
Rotary actuator with integrated pneumatic parallel gripper
| TORQUE (Ncm) | 120/136 N 85 Ncm |
| STROKE (mm) | 2x3mm 45/90/135/180° |
| UOM | NR |
| Weight [Gr] | 320 |
Choose your option
PSD-1
Compact Air Cylinder - 1/2" Bore
Single Rod, Double Acting
Original Pancake
Features
- Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
- Standard stroke lengths up to 4 inches
- Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
- Heavy wall to protect the bore from damage
- Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
- Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
- Cylinders pre-lubed with Magnalube-G grease
- Magnetic piston option available for cylinder position sensing
- Standard options and custom designs available
- Numerous mounting options
- Dial-A-Stroke precision configuration for the end stroke
Technical Advantages
- The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
- The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
- The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
- Magnalube-G Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.
Choose your option
PSD-2
Compact Air Cylinder - 3/4" Bore
Single Rod, Double Acting
Original Pancake
Features
- Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
- Standard stroke lengths up to 4 inches
- Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
- Heavy wall to protect the bore from damage
- Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
- Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
- Cylinders pre-lubed with Magnalube-G grease
- Magnetic piston option available for cylinder position sensing
- Standard options and custom designs available
- Numerous mounting options
- Dial-A-Stroke precision configuration for the end stroke
Technical Advantages
- The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
- The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
- The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
- Magnalube-G Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.
Choose your option
PSD-3
Compact Air Cylinder - 1 1/16" Bore
Single Rod, Double Acting
Original Pancake
Features
- Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
- Standard stroke lengths up to 4 inches
- Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
- Heavy wall to protect the bore from damage
- Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
- Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
- Cylinders pre-lubed with Magnalube-G grease
- Magnetic piston option available for cylinder position sensing
- Standard options and custom designs available
- Numerous mounting options
- Dial-A-Stroke precision configuration for the end stroke
Technical Advantages
- The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
- The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
- The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
- Magnalube-G Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.
Choose your option
PSD-4
Compact Air Cylinder - 1 1/2" Bore
Single Rod, Double Acting
Original Pancake
Features
- Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
- Standard stroke lengths up to 4 inches
- Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
- Heavy wall to protect the bore from damage
- Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
- Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
- Cylinders pre-lubed with Magnalube-G grease
- Magnetic piston option available for cylinder position sensing
- Standard options and custom designs available
- Numerous mounting options
- Dial-A-Stroke precision configuration for the end stroke
Technical Advantages
- The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
- The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
- The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
- Magnalube-G Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.
Choose your option
PSD-5
Compact Air Cylinder - 2" Bore
Single Rod, Double Acting
Original Pancake
Features
- Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
- Standard stroke lengths up to 4 inches
- Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
- Heavy wall to protect the bore from damage
- Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
- Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
- Cylinders pre-lubed with Magnalube-G grease
- Magnetic piston option available for cylinder position sensing
- Standard options and custom designs available
- Numerous mounting options
- Dial-A-Stroke precision configuration for the end stroke
Technical Advantages
- The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
- The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
- The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
- Magnalube-G Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.
Choose your option
PSD-6
Compact Air Cylinder - 2 1/2" Bore
Single Rod, Double Acting
Original Pancake
Features
- Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
- Standard stroke lengths up to 4 inches
- Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
- Heavy wall to protect the bore from damage
- Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
- Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
- Cylinders pre-lubed with Magnalube-G grease
- Magnetic piston option available for cylinder position sensing
- Standard options and custom designs available
- Numerous mounting options
- Dial-A-Stroke precision configuration for the end stroke
Technical Advantages
- The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
- The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
- The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
- Magnalube-G Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.
Choose your option
PSD-7
Compact Air Cylinder - 3" Bore
Single Rod, Double Acting
Original Pancake
Features
- Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
- Standard stroke lengths up to 4 inches
- Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
- Heavy wall to protect the bore from damage
- Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
- Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
- Cylinders pre-lubed with Magnalube-G grease
- Magnetic piston option available for cylinder position sensing
- Standard options and custom designs available
- Numerous mounting options
- Dial-A-Stroke precision configuration for the end stroke
Technical Advantages
- The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
- The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
- The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
- Magnalube-G Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.
Choose your option
PSD-8
Compact Air Cylinder - 4" Bore
Single Rod, Double Acting
Original Pancake
Features
- Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
- Standard stroke lengths up to 4 inches
- Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
- Heavy wall to protect the bore from damage
- Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
- Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
- Cylinders pre-lubed with Magnalube-G grease
- Magnetic piston option available for cylinder position sensing
- Standard options and custom designs available
- Numerous mounting options
- Dial-A-Stroke precision configuration for the end stroke
Technical Advantages
- The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
- The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
- The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
- Magnalube-G Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.
Choose your option
PSM Underwater Parachute - PSM 1000
PSM underwater parachutes are designed to provide extra buoyancy and for raising or lifting loads to the surface.
| Part No. | Height | Max Height | Submarine Dia. | Strap Dia. | Volume | Straps |
| PSM 1000 | 1700 MM | 2300 MM | 1250 MM | 450 MM | 1.15 M3 | 4 |
They can be used at any depth for:
- stabilizing underwater loads
- refloating objects
- sea rescue operations
- securing loads during offshore maintenance or installation operations
- providing extra buoyancy in cooling ponds.