Check Valves and Flow Restrictors
Valve Technology
Valves are used to control the vacuum as well as the compressed air. The right valves can increase both the process reliability and the cost-effectiveness of the vacuum system.
Check valves close the vacuum lines of uncovered suction cups. This maintains the system vacuum. Flow restrictors constrict the vacuum line. They are used predominantly in the handling of porous parts.
Choose your option
CLA and CLB Linearmech Series
Integrated Cam Switches and Potentiometer
Linearmech electromechanical linear actuators are easy-to-use and reliable products. Great and convenient alternative to the use of pneumatic cylinders recommended in case of medium to low speed application, intermittent duty cycle operation and self-locking requirement when load is applied, both pull or push load.
LINEARMECH CLA and CLB Series linear actuators are right angle design, AC or DC motor always included. Aluminum alloy housing with high resistance. Input drive with worm gear.
CLA Series Acme Screw Drive Linear Actuators:
6 standard sizes available
Acme screw from Ø 13,5 mm to Ø 18 mm
Linear speed up to 100 mm/s
Load capacity push-pull up to 10.000 N
Electric motors available: AC 3-phase or 1-phase motor, DC motors (12V, 24V)
Long life lubricated, maintenance free
CLB Series Ball Screw Drive Linear Actuators:
2 standard sizes available
Ball screw Ø 14
Linear speed up to 125 mm/s
Load capacity push-pull up to 7.000 N
Electric motors available: AC 3-phase or 1-phase motor, DC motors (12V, 24V)
Long life lubricated, maintenance free
Choose your option
CLA and CLB Series
Integrated Cam Switches and Potentiometer
Rear hinged attachments, 90° motor mounting design. High precision worm gearbox, ZI involute profile. Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable).
CLA Series Acme Screw Drive Linear Actuators:
3 standard sizes available
Acme screw from Ø 18 mm to Ø 30 mm
Load capacity from 10 kN to 25 kN
Standard stroke length up to 800 mm, special stroke length also available upon request
CLB Series Ball Screw Drive Linear Actuators:
3 standard sizes available
Ball screw from Ø 20 mm to Ø 32 mm
Load capacity from 10 kN to 25 kN
Standard stroke length up to 800 mm, special stroke length also available upon request
Choose your option
Clamping Equipment for 1-Circuit Systems
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
Whether using a 1-circuit or 2-circuit system, panel processing or frame production – console vacuum blocks from Schmalz can be positioned precisely and are quick and easy to replace when changing the order.
Choose your option
Clamping Equipment for 2-Circuit Systems
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
Whether using a 1-circuit or 2-circuit system, panel processing or frame production – console vacuum blocks from Schmalz can be positioned precisely and are quick and easy to replace when changing the order.
Choose your option
Clamping Equipment for Flat Table Systems
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
Schmalz clamping solutions enable the quick and uncomplicated setup of CNC machining centers with flat table.
Choose your option
Clamping Equipment for Grid Table Systems
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
Schmalz vacuum blocks for grid tables enable simple and flexible use; without complex installation. The non-slip fixings enable secure clamping of the workpieces even with high processing forces. This makes them ideal for complex five-axis applications without a wear plate.
Choose your option
Clamping Equipment for Manual Work
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
The vacuum clamping system Multi-Clamp is the perfect tool for quick and flexible clamping of small and medium-sized workpieces. They can be fixed in any position and processed all-round. The Multi-Clamp is portable and can be used in a variety of industrial, workshop and building-site contexts.
Choose your option
Clamping Equipment for Narrow Workpieces
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
Very narrow and curved parts can be clamped easily and reliably with mechanical clamps and Adapter-Plates from Schmalz. Narrow suction surfaces enable the precise positioning of the vacuum block along the workpiece contours, holding the workpiece in place. The workpiece is mechanically clamped firmly in place using the clamp.
Choose your option
Clamping Equipment for Nesting Table Systems
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
Vacuum systems for use directly on the MDF wear plate of a CNC machining center with a nesting machine table.
Choose your option
Clamping Equipment for Systems from Biesse
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
Whether using a 1-circuit or 2-circuit system, panel processing or frame production – console vacuum blocks from Schmalz can be positioned precisely and are quick and easy to replace when changing the order.
Choose your option
CLC 12T - 112373
The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.
Its thickness when empty is very low, making it easy to install in small spaces.
Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.
The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.
For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.
Choose your option
CLC 3T - 112370
The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.
Its thickness when empty is very low, making it easy to install in small spaces.
Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.
The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.
For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.
Choose your option
CLC 5T - 112371
The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.
Its thickness when empty is very low, making it easy to install in small spaces.
Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.
The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.
For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.
Choose your option
CLC 7T - 112372
The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.
Its thickness when empty is very low, making it easy to install in small spaces.
Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.
The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.
For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.
Choose your option
CLT 1 - 058156
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 10 - 058159
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 14 - 058160
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 19 - 058161
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 24 - 058162
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 24L - 058163
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 3 - 058157
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 30 - 058164
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 43 - 058165
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 54 - 058166
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 6 - 058158
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
CLT 65 - 058167
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
Compact Ejectors
Vacuum Generators
Vacuum generators provide the required vacuum. The vacuum is generated either pneumatically (ejectors) or electrically (pumps, blowers).
In addition to the functions of a basic ejector, compact ejectors are equipped with a suction valve, a blow off valve, a vacuum switch and a filter.
Choose your option
Compact Terminals
Vacuum Generators
Vacuum generators provide the required vacuum. The vacuum is generated either pneumatically (ejectors) or electrically (pumps, blowers).
Compact unit with multiple vacuum generators for the simultaneous and individual handling of different parts using only one vacuum system.
Choose your option
Compact Valves
Valve Technology
Valves are used to control the vacuum as well as the compressed air. The right valves can increase both the process reliability and the cost-effectiveness of the vacuum system.
For the control and monitoring of a vacuum system, compact valves are used which are controlled via electrical switching signals. Important process data is transmitted to the control system via an integrated sensor unit.
Choose your option
Connections and Adapters for Vacuum Switches
Switches and System Monitoring
Devices for system monitoring are crucial to ensure the safe operation of a vacuum system. Schmalz offers a wide range of switches, measuring and control devices, as well as warning devices.
The appropriate electrical connection cables and adapters for the respective switch types are available here. The wide range ensures adaptation to different requirements and local standards.