J-121-XK
Part: J-121-XK
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 1 1/8"
Stroke: 3"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-5-O
Part: J-5-O
Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 1/2"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-5-ODR
Part: J-5-ODR
Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 1/2"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-5-X
Part: J-5-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 1/2"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-5-XDR
Part: J-5-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 1/2"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-7-O
Part: J-7-O
Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 3/4"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-7-ODR
Part: J-7-ODR
Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 3/4"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-7-X
Part: J-7-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 3/4"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-7-XDR
Part: J-7-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 3/4"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-7-XDRK
Part: J-7-XDRK
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 3/4"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
J-7-XK
Part: J-7-XK
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 3/4"
Stroke: 1 1/2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
Jaw Cutting Attachment
For turning out unhardened and grinding out hardened jaws. The adjusting jaws are reversible and infinitely variable. Using the jaw cutting attachment (BAV), the chuck can be put into the status it assumes later during workpiece machining (pre-clamping) within a few seconds. The turned clamping surfaces of the chuck jaws are thus form-fit and exactly concentric in the clamped state.
BAV Series
Choose your option
JBQ 1000 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 1000
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 400 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 400
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 600 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 600
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 650 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 650
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 700 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 700
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 800 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 800
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
Jointed Mountings
Mounting Elements
Schmalz offers a wide range of mounting possibilities for integrating suction cups or special grippers into a vacuum system.
Ball joints and Flexolinks permit the suction cups to adapt themselves better to uneven workpieces.
Choose your option
K-121-X
Part: K-121-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 1 1/8"
Stroke: 4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-121-XDR
Part: K-121-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 1 1/8"
Stroke: 4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-121-XDRK
Part: K-121-XDRK
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 1 1/8"
Stroke: 4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-121-XK
Part: K-121-XK
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 1 1/8"
Stroke: 4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-5-O
Part: K-5-O
Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 1/2"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-5-ODR
Part: K-5-ODR
Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 1/2"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-5-X
Part: K-5-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 1/2"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-5-XDR
Part: K-5-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 1/2"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-7-O
Part: K-7-O
Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 3/4"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-7-ODR
Part: K-7-ODR
Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 3/4"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-7-X
Part: K-7-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 3/4"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-7-XDR
Part: K-7-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 3/4"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-7-XDRK
Part: K-7-XDRK
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 3/4"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
K-7-XK
Part: K-7-XK
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 3/4"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
Key Bar Chucks with Quick Jaw Change System
The RÖHM key bar chucks with quick jaw change system are used successfully in areas where extremely high clamping forces, high concentricity and reliable long-term repeatability are required.
RÖHM key bar chucks with quick jaw change system prevail in two ways. On the one hand, the jaws can be turned, changed or offset in just a few seconds thanks to the quick-change system. This reduces setup times. On the other hand, the key bar system prevails with very high clamping forces and accuracy that is twice that which is specified in DIN 6386. This is made possible by the large and straight force transmission surfaces between the key bar and jaw teeth.
DURO-T Series | DURO-TA Series | DURO-TA XT Series
Choose your option
L-5-X
Part: L-5-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 1/2"
Stroke: 3"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
L-5-XDR
Part: L-5-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 1/2"
Stroke: 3"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.