Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Model: 424532 - 2” NPT, 10:1 Pilot Ratio
Model Number : 424532
2" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve
Choose your option
Model: 431416 - 1” NPT, 4:1 Pilot Ratio
Model Number : 431416
1" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve
Choose your option
Model: 431516 - 1” NPT, 10:1 Pilot Ratio
Model Number : 431516
1" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve
Choose your option
Model: 434524 - 1-1/2” NPT, 10:1 Pilot Ratio
Model Number : 434524
1 1/2"" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve
Choose your option
Model: 434732 - 2” NPT, 1:1 Pilot Ratio
Model Number : 434732
2" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve
Choose your option
Choose your option
Model: ecoPROFI
Model : ecoPROFI
Max Dia. 52mm
Bar Lengths 3m/4m/6m
Handles Round, Square, Hex, and Other Odd Geometries
Choose your option
Model: ILS-MUK 100
Model : ILS-MUK 100
Max Dia. 4"
Bar Lengths 4ft/5ft
Handles Round, Hex, and Other Odd Geometries
Choose your option
Model: ILS-MUK 70
Model : ILS-MUK 70
Max Dia. 3"
Bar Lengths 4ft/5ft
Handles Round, Hex, and Other Odd Geometries
Choose your option
Model: ILS-RBL
Model : ILS-RBL
Parts / Shaft Loader
The ILS-RBL is an ultra-fast loading technology designed for semi-finished round parts to be automatically guided and positioned into the machine spindle, significantly increasing productivity. Suitable for counter-spindle lathes and Ideal for medium to large batch sizes. The feeding of the workpiece is carried out in one step. Short reloading times are present due to a single-piece pusher system and high traverse speeds. This machine can load material with diameters of up to 80mm / 105mm and bar lengths of 800mm / 1200mm. (other lengths available upon request)
- Minimal energy consumption; no compressed air supply required
- Large storage capacity
- Controlled via 5.7” graphic touch display
- Easy replacement of the spindle liner tubes by the radial slide of the magazine
Choose your option
Model: MMRB- .750 (Multi Mini Rhinobar®)
Model : MMRB- .750
Max Dia. 20mm (.787")
Bar lengths 6ft/ 12ft
Quick change between 3 feed tubes
Choose your option
Model: MRB 1.62 (Mini Rhinobar®)
Model : MRB 1.62
Max Dia. 1.62"
Bar lengths 6ft/12ft
Reliably feed 0.06" Material
Choose your option
Model: PROFImat
Model : PROFImat
Max Dia. 130mm
Bar Lengths 3m/4m/6m/8m
Handles Round, Square, Hex, and Other Odd Geometries
Choose your option
Choose your option
Choose your option
Model: SiMag
Model : SiMag
Max Dia. 130mm
Bar Lengths 2m/3m/4m/6m/8m
Handles Round, Square, Hex, and Other Odd Geometries
Choose your option
Modular Clamping System MPL-ISST-SFM for Metal and Plastics Machining
Clamping Equipment for Metal and Plastic Processing
The modular vacuum clamping systems from Schmalz can be used universally on all CNC machining centres for metalworking. Adaptation works on T-slot tables, zero point clamping systems or pre-fixing in a vice.
The modular clamping system MPL-ISST-SFM offers numerous options for clamping a wide variety of components by vacuum, making it a useful addition to any CNC machining center.
Choose your option
Modular Gripper System PXT
Mounting Elements
Schmalz offers a wide range of mounting possibilities for integrating suction cups or special grippers into a vacuum system.
The modular gripping system PXT gives you the flexibility you need to design optimal gripping systems for lightweight robots. You can design solutions for a wide range of handling processes with just a few standardized components. Thanks to the internal vacuum line, your solutions are designed for maximum flexibility and effectiveness. Assembly and conversion are simple, quick and require only a few tools.
Choose your option
Modular Gripper System PXT
Modular Gripper System
Modular gripper systems from Schmalz can be individually adapted to different workpiece geometries.
The modular gripping system PXT gives you the flexibility you need to design optimal gripping systems for lightweight robots. You can design solutions for a wide range of handling processes with just a few standardized components. Thanks to the internal vacuum line, your solutions are designed for maximum flexibility and effectiveness. Assembly and conversion are simple, quick and require only a few tools.
Choose your option
Modular Tooling
Bilsing Automation’s Flexible Tooling System features a standard automatic coupling approach for the mechanical, electrical and pneumatic connections on the tooling. This coupling system allows for very efficient tool changeover that increases production efficiency and minimizes cost of the products produced by our customers. Our Flexible Tooling System will decrease your design and manufacturing time as well as allow your company to specify robots with smaller payloads.
Choose your option
Motor Driven Pump
For fluid logistics, Pronal’s has designed a motor-driven pump.
In modular chassis, it allows the pumping of:
- Drinking water
- Waste water
- Or fuel (diesel F54, gasoline F67, kerosene F34, F35, JP8, Jet A1, avgas 100LL F18 or mono fuel F63).
Depending on the operating environment, this motor-driven pump system can be offered on a chassis, on a trailer or as a containerized solution. The thermal or electric motor of this pump drives a volumetric or centrifugal pump to ensure the required flow and pressure.
The steel (or painted aluminum alloy) frame allows the creation of light refueling, bunkering, transfer or unloading units. They are adjustable in size and flow rate (200, 400, 600, 800 and 1000 Lpm).
This motor driven water pump is used for the realization of:
- Modular secondary depots,
- Depots for field service stations,
- Tactical refueling solutions such as FARP (Forward Area Refueling Equipment) and ABFDS (Air Bulk Fuel Delivery System).
Combined with Pronal’s flexible storage and fluid transport tank solutions, these units provide high mobility for deployments.
Choose your option
MP 1-1/8 X 1
MP 1-1/8 X 1
Series: Fabco-Air Multi-Power Cylinders
Bore: 1 1/8"
Stroke: 1"
Please confirm the number of stages extended or stages retracted.
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
MP 1-1/8 X 1-1/2
MP 1-1/8 X 1-1/2
Series: Fabco-Air Multi-Power Cylinders
Bore: 1 1/8"
Stroke: 1 1/2"
Please confirm the number of stages extended or stages retracted.
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.