Choose your option
Choose your option
Square / Circular / Rectangular Inflatable Jack
Inflatable jack, or lifting bag, is a pneumatic system made of elastomers or plastomers.
Filled with air, water or oil, these products are typically mounted in industrial automation systems to push, press, guide, clamp, lock, dampen, lift and handle.
Choose your option
Square Pancake® II
Interchangeable Compact Air Cylinders
Square Pancake II
Features
- Available in a wide range of sizes
- Standard: Seven bore sizes from ¾ to 2 inches and strokes to 4 inches
- SND Series: Four bore sizes from ¾ to 2 inches and strokes to 4 inches
- Self-lubricating composite body
- Clear anodized aluminum alloy heads
- Stainless steel tie bolts
- Rod Bushing
- Standard: composite
- SND Series: bronze
- Prelubed with Magnalube-G grease
- Chrome-plated stainless steel piston rods
- Rod end toolbar (SND Series)
- Air service to 200 psi
- Minimum Recommended Operating Pressure: 15 psi
- Temperature Ratings
- cylinder: -25° to +225° F (-32° to + 121° C)
- electronic sensors: -4° to +176° F (-20° to + 80° C)
- Internally lubricated Buna-N seals
- Many options available
- Magnetic piston sensing available
Technical Advantages
- Interchangeable composite cylinder barrel with stainless steel tie bolts and aluminum spacers that lock precision machined heads tightly into place.
- High-strength high performance composite resists corrosion, moisture and temperatures up to 325° F, while offering a high load capacity and very little friction.
- High impact resistance, minimizing failure caused by dings and dents.
- Self-lubricating cylinder wall ensures high performance thanks to a smooth interior with low coefficient of friction to minimize heat buildup, eliminate stick-slip and extend seal life.
- The hard chrome-plated stainless steel piston rod ensures long cylinder life.
- The high performance composite piston rod bearing and shaft work together to ensure high reliability: Over the cylinder’s cycle life, the composite bearing — which carries 60,000 psi — polishes the hard chrome-plated shaft.
- Magnalube G Teflon-impregnated grease provides a long operating life and lubricates across a wide temperature range.
- Buna-N O-rings are internally pre-lubed with Magnalube-G as standard. U-cup seals are also available.
Choose your option
Standard Inflatable Pipe Plug - OPL
The standard inflatable pipe plug (OPL) is designed to temporarily or permanently plug pipes, sewers or gutters. Flexible and light, it is effective for a fast, tight and reliable sealing of the pipe.
Many sizes are available to cover pipes from 30 to 2000 mm in diameter. Thanks to these various diameters, this plugging balloon can be used in many fields: sewage networks, rainwater and wastewater with the NR range, as well as hydrocarbons and/or chemicals with the NBR range.
Moreover, the standard inflatable pipe plug is available in standard or by-pass versions. Thanks to this adaptability, it is possible to safely carry out an application such as:
Choose your option
Suction Cups for Handling Composites
Vacuum Suction Cups
Suction cups and suction plates for handling flat, smooth workpieces such as glass which depend on high lateral forces. Bellow suction cups for gentle handling of, for example, automotive glass as well as handling of visible parts made of glass while leaving few marks.
These suction plates are ideal, in particular, for handling flexible materials such as prepreg or semi-finished products made of fiber composite material. The suction areas have uniform holes added for surface vacuum distribution. The adaptable sealing ring ensures a good seal and increases lateral forces.
Choose your option
Suction Cups for Handling Glass
Vacuum Suction Cups
Suction cups and suction plates for handling flat, smooth workpieces such as glass which depend on high lateral forces. Bellow suction cups for gentle handling of, for example, automotive glass as well as handling of visible parts made of glass while leaving few marks.
Choose your option
Suction Cups for Handling Sheet Metal
Vacuum Suction Cups
Schmalz product range includes a variety of suction cups with various shapes, sizes and materials, providing the right suction cup for every application. Suction cups consist of a elastomer part and a connection nipple. Please call if you require help making a selection.
Suction cups for handling sheet metal also with oily surfaces, handling blanks when unstacking as well as sheet metal parts with convex surfaces.
Choose your option
Suction Cups for Handling Wood
Vacuum Suction Cups
Schmalz product range includes a variety of suction cups with various shapes, sizes and materials, providing the right suction cup for every application. Suction cups consist of a elastomer part and a connection nipple. Please call if you require help making a selection.
Choose your option
Suction Cups for High-Temperature Applications
Vacuum Suction Cups
Suction cups and suction plates for handling flat, smooth workpieces such as glass which depend on high lateral forces. Bellow suction cups for gentle handling of, for example, automotive glass as well as handling of visible parts made of glass while leaving few marks.
Schmalz has developed suction cups to handle workpieces at high temperatures that are perfect for this task. The suction plates can withstand temperatures up to 600 °C and can be used for handling when tempering float glass and during the heat forming process of metal.
Choose your option
Suction Cups for Plastic Films and Paper
Vacuum Suction Cups
Schmalz product range includes a variety of suction cups with various shapes, sizes and materials, providing the right suction cup for every application. Suction cups consist of a elastomer part and a connection nipple. Please call if you require help making a selection.
Schmalz suction cups make for easy handling of foils and paper. The flat sealing lip and the reinforced inside of the cup prevent that the unstable workpiece gets sucked in. These sealing cups do not leave an imprint on the unstable workpieces even at high temperatures.
Choose your option
Suction Cups for the Electronics Industry
Vacuum Suction Cups
Schmalz product range includes a variety of suction cups with various shapes, sizes and materials, providing the right suction cup for every application. Suction cups consist of a elastomer part and a connection nipple. Please call if you require help making a selection.
The suction cups are suitable for handling printed circuit boards, blank circuit boards and other electronic components.
Choose your option
Suction Cups for the Packaging Industry
Vacuum Suction Cups
Schmalz product range includes a variety of suction cups with various shapes, sizes and materials, providing the right suction cup for every application. Suction cups consist of a elastomer part and a connection nipple. Please call if you require help making a selection.
These suction cups are characterized by a robust body and a soft sealing lip that molds to the shape of the packaging.
Choose your option
Suction Spider
Vacuum Gripping Systems
Schmalz's complex vacuum gripping systems let you implement decisive productivity increases during automated processes. The systems range from layer and vacuum area gripping systems to ready-to-install vacuum suction spiders for use in all areas of automation.
Schmalz individually designs vacuum suction spiders for your application needs. The vacuum suction spiders have been designed according to a modular principle. All versions of the vacuum suction spider are derived from the basic design which can be flexibly optimized for complex handling tasks. Our experienced system consultants also use individual vacuum components from our broad range of products.
Choose your option
Suspension Clampable FST-C
Mounting Elements
Schmalz offers a wide range of mounting possibilities for integrating suction cups or special grippers into a vacuum system.
Clamping suspension unit for area grippers for handling workpiece layers at varying heights.
Choose your option
Suspension Rigid/Flexible Set
Mounting Elements
Schmalz offers a wide range of mounting possibilities for integrating suction cups or special grippers into a vacuum system.
Spring plunger-combination of "fixed and floating bearings" for jam free compensation of height tolerances at suspension of gripping systems.
Choose your option
Swivel Units
For automated loading and unloading of machine tools as well as for quick and precise insertion of components in assembly systems, the RSP-Flex swivel units provide an alternative to complex custom designs. Thanks to the modular structure and the extensive expansion options, they can be integrated flexibly and reliably. The innovative shock absorber concept with flexible and infinitely variable adjustability in all end positions allows for smooth and precise swiveling.
RSP-FLEX
Choose your option
Synthetic Grippers (Soft) Grippers
Whether round material, prismatic workpieces or free-form surfaces, the synthetic RRMG gripper from RÖHM is individually adapted to the workpiece and then produced. This guarantees not only a perfect grip, but it also saves a considerable amount of weight thereby reducing the accelerated masses. Only a 3D model of the workpiece is required, and RÖHM will produce the individual synthetic RRMG gripper based on that. This customer-specific solution is therefore perfect for gripping and clamping sensitive workpieces with complex geometries.
RRMG | RRMG-MRK
Choose your option
TH12508-NC
Choose your option
TH12508-NO
Choose your option
TH12516-NC
Choose your option