Model: SiMag
Model : SiMag
Max Dia. 130mm
Bar Lengths 2m/3m/4m/6m/8m
Handles Round, Square, Hex, and Other Odd Geometries
Choose your option
Model: ecoPROFI
Model : ecoPROFI
Max Dia. 52mm
Bar Lengths 3m/4m/6m
Handles Round, Square, Hex, and Other Odd Geometries
Choose your option
Model: ILS-MUK 100
Model : ILS-MUK 100
Max Dia. 4"
Bar Lengths 4ft/5ft
Handles Round, Hex, and Other Odd Geometries
Choose your option
Model: ILS-MUK 70
Model : ILS-MUK 70
Max Dia. 3"
Bar Lengths 4ft/5ft
Handles Round, Hex, and Other Odd Geometries
Choose your option
Model: PROFImat
Model : PROFImat
Max Dia. 130mm
Bar Lengths 3m/4m/6m/8m
Handles Round, Square, Hex, and Other Odd Geometries
Choose your option
Model: MRB 1.62 (Mini Rhinobar®)
Model : MRB 1.62
Max Dia. 1.62"
Bar lengths 6ft/12ft
Reliably feed 0.06" Material
Choose your option
Model: MMRB- .750 (Multi Mini Rhinobar®)
Model : MMRB- .750
Max Dia. 20mm (.787")
Bar lengths 6ft/ 12ft
Quick change between 3 feed tubes
Choose your option
Choose your option
Choose your option
Model: ILS-RBL
Model : ILS-RBL
Parts / Shaft Loader
The ILS-RBL is an ultra-fast loading technology designed for semi-finished round parts to be automatically guided and positioned into the machine spindle, significantly increasing productivity. Suitable for counter-spindle lathes and Ideal for medium to large batch sizes. The feeding of the workpiece is carried out in one step. Short reloading times are present due to a single-piece pusher system and high traverse speeds. This machine can load material with diameters of up to 80mm / 105mm and bar lengths of 800mm / 1200mm. (other lengths available upon request)
- Minimal energy consumption; no compressed air supply required
- Large storage capacity
- Controlled via 5.7” graphic touch display
- Easy replacement of the spindle liner tubes by the radial slide of the magazine
Choose your option
Model : 70-8012 (Unload Pro 80-1200)
Model : 70-8012
Unloaders / Accumulators
The Unload Pro quickly unloads round workpieces in a fully automatic and gentle manner. The rapid unloading technology creates a continuous flow of material enabling the lathe to optimize cycle times. Ideal for medium to large-sized batches. This machine can unload material with diameters up to 3.15" (80mm) and workpiece lengths up to 48" (1200mm)
- Gentle unloading of the workpieces through the machine sub-spindle
- Large storage capacity
- Controlled via 5.7” graphic touch display
- Easy replacement of the spindle liner tubes by the radial slide of the magazine
- Designed by Breuning IRCO in germany
- Made in the USA by Lexair, Inc.
Choose your option
Model : RP-48 (Rotary-Pro Parts Accumulator)
Model : RP-48
Unloaders / Accumulators
THE ROTARY-PRO is a stand-alone parts handling system designedto safely convey and collect finishedcomponents from all types of CNC machines, requiring no machine interface or specialist training to operate.
• Large volumes of components can be stored safely with no damage to parts allowing CNC machines to run unattended for prolonged periods, ideal for overnight production.
• The Rotary-Pro “soft handles” finished components on high lubricity plastic to minimize friction and keep parts safe from damage.
• Electrical power can be supplied from an independent supply or from any Lexair bar feed system.