BE 11
Air Turbines / Air Motors / Drilling Spindles
High Precision Drilling Unit BE 11
BE11 precision drilling/grinding unit with a basic design based on a patented air-driven turbine motor. The drive unit is powered without intermediate gears and features variable speed control up to 80 000 rpm. A special high-speed precision bearing makes the drilling unit extremely quiet with a sound level of 67 dB (A). BE 11 / HFS 100 is designed for lubrication- free operation.
Choose your option
BE 22 SK
Air Turbines / Air Motors / Drilling Spindles
Pneumatic Drilling Unit BE 22 SK
The BE 22 SK consists of an air motor, a gear box and a body. The design is compact as well as robust. BE 22 SK comes in a wide range of speeds, and is available for lubrication-free operation.
Choose your option
BEP 22 SK
Air Turbines / Air Motors / Drilling Spindles
Pneumatic Precision Drilling Unit BEP 22 SK
he BEP 22 SK is a precision drilling unit, equipped with a precision chuck. Thanks to separate and double ball bearings run-out amounts to a maximum of 0.01 mm. Its design is compact as well as robust. The BEP 22 SK comes in a wide range of speeds, and is available for lubrication-free operation.
Choose your option
BE 33 SK
Air Turbines / Air Motors / Drilling Spindles
Pneumatic Precision Drilling Unit BE 33 SK
The BE 33 SK consists of an air motor, a gear box and a body. The design is compact as well as robust. BE 33 SK comes in a wide range of speeds, and is available for lubrication-free operation.
Choose your option
BE 21
Pneumatic Drilling Units With Feed
Air Operated Drilling Unit BE 21
The BE 21 is an air operated drilling unit with feed. The design of the BE 21 makes it very suitable for drilling blind holes, reaming etc. We also offer a stainless version of this unit, the BES 21, ideal for operation in environments where water or other corrosive fluids are present.
Choose your option
BE(S) 21
Pneumatic Drilling Units With Feed
Air Operated Drilling Unit BE(S) 21
The BE 21 is an air operated drilling unit with feed. The design of the BE 21 makes it very suitable for drilling blind holes, reaming etc. We also offer a stainless version of this unit, the BES 21, ideal for operation in environments where water or other corrosive fluids are present.
Choose your option
BE(F) 22
Pneumatic Drilling Units With Feed
Air Hydraulic Drilling Unit BE(F) 22
The basic design of the BE(f) 22 consists of a vane motor powered by compressed air, a pneumatic cylinder, and a closed hydraulic system. The total stroke length can be variably subdivided into rapid advance and working feed across the whole range. The throttle/check valve in the hydraulic system permits exact setting of the feed rate and high speed return.
Choose your option
BE(F)P 22
Pneumatic Drilling Units With Feed
Air Hydraulic Precision Drilling Unit BE(F)P 22
The basic design of the BE(f)P 22 consists of a vane motor powered by compressed air, a pneumatic cylinder, and a closed hydraulic system. The BE(f)P 22 has a precision chuck for an extra high level of precision. Thanks to precision, separate and double ball bearings run-out amounts to a maximum of 0.01 mm. The total stroke length can be variably subdivided into rapid advance and working feed across the whole range . The throttle/check valve in the hydraulic system permits exact setting of the feed rate and high speed return.
Choose your option
BE 33
Pneumatic Drilling Units With Feed
Air Hydraulic Drilling Unit BE 33
The basic design of the BE 33 consists of a vane motor powered by compressed air, a pneumatic cylinder, and a closed hydraulic system. The total stroke length can be variably subdivided into rapid advance and working feed over the whole range. The throttle/check valve in the hydraulic system permits exact setting of the feed rate and high speed return.
Choose your option
BE 48
Electro Pneumatic Drilling Units With Feed
Electro Pneumatic Drilling Unit BE 48
The BE 48-series is a flexible electro-pneumatic series of units in a modular design. The electric motor powers the spindle, while the feed is pneumatic. With the hydraulic feed control you can adjust the speed for best performance. The option linear sensor makes it possible to include functions such as multi- wall drilling and automatic chip removal. The series is available with integrated ER32 chuck as well as with multi-spindle heads.
Choose your option
LS 22
Tapping Units
Pneumatic Lead Screw Tapping Unit LS 22
The LS 22 tap unit consists of a vane motor powered by compressed air, a planetary gearbox, lead screw, nut and a follower with cams to activate built-in switches. The design of the LS 22 tap unit is compact yet highly functional. The lead screw ensures high repeatability for threading operations.
Choose your option
BEG 48
Tapping Units
Electro Pneumatic Tapping Unit BEG 48
The BEG 48-series is a flexible electro-pneumatic unit in a modular design. The electric motor runs the spindle, while the feed is pneumatic. With the hydraulic feed control you can adjust feed rate in proportion to the pitch and the rpm. A tapping collect or a tapping spindle gives the unit the necessary length compensation. The series is available with JT2 taper or integrated ER32 chuck as well as with multi-spindle heads.
Choose your option
BE 22 SKM
Milling Units
Pneumatic Milling Unit BE 22 SKM
The BE 22 SKM consists of an air motor, a gear box and a robust body. The design is compact as well as robust. BE 22/33 SKM comes in a wide range of speeds, and is available for lubrication- free operation.
Choose your option
BE 33 SKM
Milling Units
Pneumatic Milling Unit BE 33 SKM
The BE 33 SKM consists of an air motor, a gear box and a ro- bust body. The design is compact as well as robust. BE 22/33 SKM comes in a wide range of speeds, and is available for lubrication- free operation.
Choose your option
E2 Components - Collect Chuck
Tool Holders
Collect Chucks - Flowdrill Chucks
All E2 units are delivered ready for tools. E2 has a cost-effective tool holding solution for each unit, but if the application requires other holding tools, E2 offers a wide range of options.
Choose your option
E2 Components - Multi-Spindle Head
Tool Holders
Multi-Spindle Heads
Information on E2’s range of multi-spindle heads, and specifications of feasible head and unit combinations for drilling and tapping. Other combinations are possible for special applications like countersinking, reaming, etc, as well as heads with fixed spindles in patterns according to customer specification.
Choose your option
E2 Components - Controls
Components
Controls - Pneumatic & Electric Switches
E2’s units are designed for automation and are simple to connect.