Geared Scroll Chucks
For variable manufacturing with a large jaw adjustment range. The jaws can be adjusted over the entire clamping range to be able to very quickly clamp workpieces with a wide clamping diameter range without offsetting the jaws.
ZS Series 3 Jaw | ZS Series 4 Jaw
ZS Orange Line, 3 Jaw | ZS Orange Line, 4 Jaw
Choose your option
Hybrid Clamps
A precisely centered and deformation-free setup is of utmost importance, especially for easily deformable workpieces, which require turning machining from all three sides within one working operation. Thanks to the combination of magnetic clamping force and deformation-free centering, workpieces, such as rings or other hard-to-grip parts having a wide range of sizes and contours, can be precisely clamped within seconds with the hybrid chuck MZMF
MZMF Series
Choose your option
Independent Chucks
Independent chucks from RÖHM are particularly successful and effective when force has top priority. Due to the increased rigidity and optimal wear behavior, they are especially suitable for the initial machining of irregular, regular and round workpieces and make high machining forces and a longer machine service life possible.
The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and easy clamping of irregular, regular, as well as round workpieces.
ES Series
Choose your option
Jaw Cutting Attachment
For turning out unhardened and grinding out hardened jaws. The adjusting jaws are reversible and infinitely variable. Using the jaw cutting attachment (BAV), the chuck can be put into the status it assumes later during workpiece machining (pre-clamping) within a few seconds. The turned clamping surfaces of the chuck jaws are thus form-fit and exactly concentric in the clamped state.
BAV Series
Choose your option
Lever Scroll Chucks
For positioning and conveying workpieces.
Plane spiral ring chuck in a cast iron design with clamping ring.
KRF series, 3-jaw | KRF series, 4-jaw | KRF series on base plate
Choose your option
Geared Scroll Chucks with Individual Jaw Adjustment
For variable manufacturing for aligning irregularly-shaped workpieces.
ES Series with Fine Adjustment
Choose your option
High-Precision Geared Scroll Chucks
For variable manufacturing with a large jaw adjustment range and maximum concentricity.
Plane spiral chuck in a steel design with which the workpiece can be adjusted very sensitively to the desired concentricity via 3 tangentially arranged adjusting spindles.
ZS HI-TRU SERIES
Choose your option
Key Bar Chucks with Quick Jaw Change System
The RÖHM key bar chucks with quick jaw change system are used successfully in areas where extremely high clamping forces, high concentricity and reliable long-term repeatability are required.
RÖHM key bar chucks with quick jaw change system prevail in two ways. On the one hand, the jaws can be turned, changed or offset in just a few seconds thanks to the quick-change system. This reduces setup times. On the other hand, the key bar system prevails with very high clamping forces and accuracy that is twice that which is specified in DIN 6386. This is made possible by the large and straight force transmission surfaces between the key bar and jaw teeth.
DURO-T Series | DURO-TA Series | DURO-TA XT Series
Choose your option
