ESR3P
Subplate Mounted - 3/8" NPTF
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR12
Side Ported - 1 1/2" NPTF
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR8
Side Ported - 1" NPTF
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR6
Side Ported - 3/4" NPTF
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR4
Side Ported - 1/2" NPTF
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR3
Side Ported - 3/8" NPTF
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR2
Side Ported - 1/4" NPTF
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO8P
Subplate Mounted - 1" Flow
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR4P
Subplate Mounted - 1/2"
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR16P
Subplate Mounted - 1 1/2"
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO16P
Subplate Mounted - 1 1/2"
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESR8P
Subplate Mounted - 1" Flow
(many options available, please call)Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO4P
Subplate Mounted - 1/2"
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO3P
Subplate Mounted - 3/8" NPTF
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO12
Side Ported - 1 1/2" NPTF
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO8
Side Ported - 1" NPTF
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO6
Side Ported - 3/4" NPTF
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO4
Side Ported - 1/2"
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO3
Side Ported - 3/8" NPTF
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choose your option
ESO2
Side Ported - 1/4" NPTF
(many options available, please call)Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).