Lexair

Model: 335804-1 - 1/4" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 335804-1

Lexair

Model: 335806-1 - 3/8" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 335806-1

Lexair

Model: 335808-1 - 1/2" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 335808-1

Lexair

Model: 335812-1 - 3/4" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 335812-1

Lexair

Model: 335816-1 - 1" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 335816-1

Lexair

Model: 335820-1 - 1 1/4" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 335820-1

Lexair

Model: 335824-1 - 1 1/2" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 335824-1

Lexair

Model: 335832-1 - 2" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 335824-1

Lexair

Model: 336904-1 - 1/4" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 336904-1

Lexair

Model: 336906-1 - 3/8" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 336906-1

Lexair

Model: 336908-1 - 1/2" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 336908-1

Lexair

Model: 336912-1 - 3/4" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 336912-1

Lexair

Model: 336916-1 - 1" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 336916-1

Lexair

Model: 336920-1 - 1 1/4" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 336920-1

Lexair

Model: 336924-1 - 1 1/2" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 336924-1

Lexair

Model: 336932-1 - 2" 2-way Direct Solenoid Normally Closed Poppet Valve

Model Number : 336932-1

Dynamco

Bleed Feed Valves

A Bleed/Feed valve acts as a 3-way, 3-position, closed center control valve, with two solenoid operators. As you can see from the pictures to the right, the Bleed/Feed valve is essentially two DASH 1 valves that have been mounted together with special porting, depending on customer requirements.

Dynamco

DASH 3 Valves

There are no moving seals in the DASH 3 valve! The DASH 3 is a metal to metal lapped spool valve. Traditional metal to metal valves can be unforgiving and require extremely fine filtration. Dynamco’s design of using dissimilar metals of different hardnesses eliminates the need.

Dynamco controls the clearances between the body and spool by individually match fitting each spool and body to achieve a proper floating air bearing. The clearance has a narrow range that every valve must achieve. The thermal expansion coefficients of the body and spool are the same so the clearance stays the same over a wide range of temperatures.

Dynamco

DASH 2 Valves

There are no moving seals in the DASH 2 valve! The DASH 2 is a metal to metal lapped spool valve. Traditional metal to metal valves can be unforgiving and require extremely fine filtration. Dynamco’s design of using dissimilar metals of different hardnesses eliminates the need.

Dynamco controls the clearances between the body and spool by individually match fitting each spool and body to achieve a proper floating air bearing. The clearance has a narrow range that every valve must achieve. The thermal expansion coefficients of the body and spool are the same so the clearance stays the same over a wide range of temperatures.

Dynamco

DASH 1 Valves

The DASH 1 valve family is based on a direct solenoid poppet that can be either a three way (3/2) or a two way (2/2) valve. The DASH 1 is a precision combination of miniature size, fast response, high flow, low power, and long life.

There are several valve versions in the DASH 1 family. Cataloged models include: ports in body, manifold mount, adapter plate, PC board mount, and 1/8 pipe-stud output.

AAA Products International

ESR3P

Subplate Mounted - 3/8" NPTF

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR12

Side Ported - 1 1/2" NPTF

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR8

Side Ported - 1" NPTF

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR6

Side Ported - 3/4" NPTF

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR4

Side Ported - 1/2" NPTF

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR3

Side Ported - 3/8" NPTF

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR2

Side Ported - 1/4" NPTF

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESO8P

Subplate Mounted - 1" Flow

Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR4P

Subplate Mounted - 1/2"

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR16P

Subplate Mounted - 1 1/2"

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESO16P

Subplate Mounted - 1 1/2"

Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESR8P

Subplate Mounted - 1" Flow

Single solenoid, 2-position, pilot returned spool. Spool returns to position "C" from auxiliary control valve furnished by the user. This operator style will operate reliably on line pressures from 160 PSI down to 25 PSI. Return shift pressure should be 25 PSI or greater. If the line pressure is 160 PSI to 250 PSI or less than 25 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESO4P

Subplate Mounted - 1/2"

Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESO3P

Subplate Mounted - 3/8" NPTF

Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESO12

Side Ported - 1 1/2" NPTF

Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.

AAA Products International

ESO8

Side Ported - 1" NPTF

Single solenoid, 2-position, spring return. Spool returns to original position when solenoid is de-energized. This operator style will operate reliably on line pressures from 150 PSI down to 50 PSI. If the line pressure is 150 PSI to 250 PSI or less than 50 PSI to 28" Hg, then the solenoid operator must be configured to use an "External Pilot" source.