Pronal

JBQ 400 - Inflatable Formwork- JB Qualifix®

Inflatable Formwork- JB Qualifix®

Model: JBQ 400

The JB QUALIFIX® is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX® acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.

Pronal

JBQ 600 - Inflatable Formwork- JB Qualifix®

Inflatable Formwork- JB Qualifix®

Model: JBQ 600

The JB QUALIFIX® is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX® acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.

Pronal

JBQ 650 - Inflatable Formwork- JB Qualifix®

Inflatable Formwork- JB Qualifix®

Model: JBQ 650

The JB QUALIFIX® is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX® acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.

Pronal

JBQ 700 - Inflatable Formwork- JB Qualifix®

Inflatable Formwork- JB Qualifix®

Model: JBQ 700

The JB QUALIFIX® is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX® acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.

Pronal

JBQ 800 - Inflatable Formwork- JB Qualifix®

Inflatable Formwork- JB Qualifix®

Model: JBQ 800

The JB QUALIFIX® is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX® acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.

Pronal

Lever Sensor

The Pronal level sensor is an advanced solution designed for precise, real-time monitoring of liquid levels and corresponding volumes in flexible tanks. Leveraging its technology, the sensor ensures optimal management of available resources, whether it be water, fuel, oil, or any other industrial fluid. The level sensor is adaptable to all types of tanks and liquids, making it an ideal solution for various industrial sectors with specific needs for monitoring liquid volumes.

Pronal

Motor Driven Pump

For fluid logistics, Pronal’s has designed a motor-driven pump.

In modular chassis, it allows the pumping of:

Drinking water
Waste water
Or fuel (diesel F54, gasoline F67, kerosene F34, F35, JP8, Jet A1, avgas 100LL F18 or mono fuel F63).

Depending on the operating environment, this motor-driven pump system can be offered on a chassis, on a trailer or as a containerized solution. The thermal or electric motor of this pump drives a volumetric or centrifugal pump to ensure the required flow and pressure.

The steel (or painted aluminum alloy) frame allows the creation of light refueling, bunkering, transfer or unloading units. They are adjustable in size and flow rate (200, 400, 600, 800 and 1000 Lpm).

This motor driven water pump is used for the realization of:

Modular secondary depots,
Depots for field service stations,
Tactical refueling solutions such as FARP (Forward Area Refueling Equipment) and ABFDS (Air Bulk Fuel Delivery System).

Combined with Pronal’s flexible storage and fluid transport tank solutions, these units provide high mobility for deployments.

Pronal

Mud Wiper Seal

Mud Wiper Seals are circular lip seals designed to prevent mud rising from the seafloor. Acting as an effective “anti-mud” barrier, they prevent all impurities entering the legs of offshore platforms.

These non-inflatable toric seals are used to prepare grouting operations. They prevent mud from penetrating the void between the internal diameter of the platform leg and the external diameter of the anchor pile.

The mud wiper seal provides a mud barrier when the jacket is set on the seabed and avoids mud rising after pile driving.

Mud wiper seals are designed according to :

Leg ID
Pile OD

Pronal

Oil Storage Tank

The oil storage tank is the ideal solution for temporary or permanent storage of dielectric oil. PRONAL flexible tanks are made from technical fabrics coated with elastomer, which are particularly suitable for oil storage. These fabrics are also resistant to extreme weather conditions.

This tank is mainly used for:

On-site maintenance operations
Commissioning operations on transformers
Rapid expansion of storage facilities
Storage awaiting recycling/treatment

This oil storage tank ranges from 1 to 300 m3. Its accessories are adapted to the most used oil regeneration units. The connection is easy and quick to set up.

Pronal

Onion Water Tank - Opentank

The OPENTANK onion water tank is in circular shape. It is composed of an inflatable or foam float.

In contrast to the closed flexible tank, this open storage solution allows for quick storage of raw or drinking water by its top opening. Thanks to its fast installation and pumping/filling and its light weight, it can be used in a punctual way. Moreover, it is foldable. Therefore, takes up very little space. It is also very easy to clean in case of water pollution by sludge, leaves, sand etc.

This open top water storage tank has been primarily designed for:

The storage of raw water dedicated to civil security. This solution is widely used by firemen to fight forest fires. Helicopters carry bambi buckets that will fill up quickly by dipping them into our open top water storage tanks.
And the storage of drinking water dedicated to humanitarian organizations.

Aircraft Recovery Lift Bags

Model: PARC 65 T1L

Aircraft Recovery Lift Bags (PARC) are used to lift disabled aircraft in accidents. Aircraft Recovery lift bags are a collection of different inflatable and independent chambers. These inflatable chambers allow any type of aircraft to be lifted without causing secondary damage.

Pronal

PARC 80 T1 - Aircraft Recovery Lift Bags

Aircraft Recovery Lift Bags

Model: PARC 80 T1

Aircraft Recovery Lift Bags (PARC) are used to lift disabled aircraft in accidents. Aircraft Recovery lift bags are a collection of different inflatable and independent chambers. These inflatable chambers allow any type of aircraft to be lifted without causing secondary damage.

Pronal

Pick Up Truck Tank

The Pick-up truck tank is dedicated to the transport of water (or hydrocarbon) on board vehicles or skips.

It is mainly used for refueling in remote areas (military or humanitarian). This type of tank can also be used to facilitate access to a water point quickly (irrigation, agriculture…).

It is manufactured in parallelepiped shape from PVC fabric and assembled by high frequency welding.

This range of Pick-up truck tank is equipped with flexible interior partitions from a capacity of 1500 liters. Thus, the movement of liquids is reduced, and the stability of the vehicle is ensured.

In addition, this tank is lightweight, so it is easily transportable, foldable and unfoldable.

This flexible tank for pickup trucks can be custom-made to fit your vehicle!

Pronal

PIPE TEST PLUG- OTR

Pronal’s pipe test plug OTR is designed to test the tightness of inspection wells that are found in waste-water systems. Flexible and light, you can easily integrate it in the sewerage network. Moreover, its execution is very fast.

Whatever the diameter of the pipe, the height of the sealing balloons is 200 mm. This allows a simple and fast use in narrow spaces.

Thanks to a double-walled fabric and a hot vulcanization in the autoclave, the pipe test plug allows a perfect seal. It also offers a high resistance to wear and tear and therefore a long service life.

In addition, the pipe plug is equipped with through walls for pressurization, intended for manhole tightness tests.

In the range of inflatable pipe plugs dedicated to sanitation, there is also the standard inflatable pipe plug OPL.

Pronal

Pneumatic Moulded Gripper – MCP

The pneumatic moulded gripper range is fitted with a strip along their entire length that adapts to the complex shape of the bottle rings. Several diameters can be performed to adapt to the different volumes.

Standard lengths are 1320 mm and 1460 mm. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.

In addition, to meet quality requirements, the grippers are available with food-safe material coating on request. Depending on your installation, the pneumatic moulded gripper will be adapted with reinforcing, a threaded ring height, etc.

Finally, for long neck bottles you can find the range of pneumatic tube gripper.

Pronal

Pneumatic Tube Gripper Long Neck - MC/ML

The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.

The standard lengths are 1320 mm and 1460 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.

To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.

For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.

Pronal

Pneumatic Tube Gripper Short Neck - MCC

MCC pneumatic tube gripper short neck range is dedicated to short neck bottles for small quantities, like miniatures. For this type of bottle, there is also the range of half pneumatic bottle gripper. Their thinness when deflated means that they can be inserted easily between the rows of bottles.

Two lengths are available as standard: 1320 mm and 1460 mm. Other dimensions can be tailor-made to match the pallet loading plan.

Our range of pneumatic tube gripper short neck is manufactured in our workshops from NPVC coated fabric and assembled by hot vulcanization in autoclave.

Like for the other inflatable gripper ranges, a food-safe coating can be added on demand. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.

Pronal

Pneumatic tube gripper – MCS

By design, the MCS pneumatic tube gripper range combines the advantages of the double pneumatic bottle gripper MCB range with a more compact height. In addition, for users who need to fill pallets with different size bottles, these grippers can easily replace several models from the pneumatic tube gripper long neck MC range with just one system.

Indeed, its low height fits both long or short neck bottles. The pneumatic tube grippers are widely used to avoid changing grippers between two types of bottles. Only the spacing between the grippers need be changed.

Two lengths are available as standard: 1320 mm and 1460 mm. A food-safe coating can be added to the grippers on request. Depending on your installation, the inflatable rings will be adapted with reinforcing, a threaded ring height, etc.

Pronal

PSM Underwater Parachutes

PSM underwater parachutes are designed to provide extra buoyancy and for raising or lifting loads to the surface. They can be used at any depth for:

stabilizing underwater loads
refloating objects
sea rescue operations
securing loads during offshore maintenance or installation operations
providing extra buoyancy in cooling ponds.

Pronal

Rain Water Storage Tank

This raw water storage tank is the standard solution. You can use it for permanent or temporary storage.

Today more than ever, the proper management of water and its preservation represent a considerable economic challenge. They are easy to transport to the site and quick to install. Therefore, PRONAL tanks are the ideal solution to easily build a water reserve.

These flexible tanks can be used:

For rainwater harvesting
As a crawl space
As a water reserve on construction sites

Like our other tanks, it is made from highly resistant PVC coated fabric (1300 gr/m2) and assembled by high frequency welding. This fabric resists all temperatures from -30°C to +70°C.

Pronal

RDF Underwater Lifting Units

Underwater lifting units are designed for:

securing loads,
transporting loads on the surface
or dismantling ships.

With the possibility of customized design and construction, they can meet the demands of a range of markets. Not only can they assist the buoyancy of an object or ship on the surface, but they can also be employed to easily raise and lower loads underwater.

Pronal

Retention Tank

The flexible retention tank acts primarily as a double wall for flexible tanks. It is mainly used for liquid fertilizer tanks, oil storage tanks and fuel bladder.

Indeed, in case of a problem during the use of the flexible tank, the losses of fuels and oils are retained in the retention. Thus, the impact on the environment is minimized.

The flexible retention is a tailor-made solution. Several flexible tanks can be installed in the same retention tank depending on the dimensions.

Secondly, the retention tank can also contain rigid elements. Oil processing machines (or other fluids) as well as transformers and hydraulic systems can be installed there. During maintenance, they are isolated from their environment.

These flexible retentions are equipped with a metal frame made of galvanized steel. It is made of identical tubes and joints that make it easy to assemble. The flexible bund is easy and quick to deploy, about 20 minutes, and requires only 2 people for installation.

The retention can be accompanied by a drainage and rainwater filtration kit. This kit allows to filter hydrocarbons from the rainwater contained in the retention. Also, it allows the retention to remain empty and clean.

Pronal

Rip-Out Diaphragm Closure

The rip-out diaphragm closure, equipped with a cruciform piercing tool, provides different functions:

buoyancy assistance for large platforms equipped with metal floatation tanks,
corrosion protection for electrical outlet cables.

Made from high resistance rubber coated fabric and assembled by hot vulcanization, our rip-out diaphragm closure is designed to consider:

Leg ID
Thickness of the leg
Water depth

This is a solution for your oil & gas project.

Pronal

Square / Circular / Rectangular Inflatable Jack

Inflatable jack, or lifting bag, is a pneumatic system made of elastomers or plastomers.

Filled with air, water or oil, these products are typically mounted in industrial automation systems to push, press, guide, clamp, lock, dampen, lift and handle.

Pronal

Standard Inflatable Pipe Plug - OPL

The standard inflatable pipe plug (OPL) is designed to temporarily or permanently plug pipes, sewers or gutters. Flexible and light, it is effective for a fast, tight and reliable sealing of the pipe.

Many sizes are available to cover pipes from 30 to 2000 mm in diameter. Thanks to these various diameters, this plugging balloon can be used in many fields: sewage networks, rainwater and wastewater with the NR range, as well as hydrocarbons and/or chemicals with the NBR range.

Moreover, the standard inflatable pipe plug is available in standard or by-pass versions. Thanks to this adaptability, it is possible to safely carry out an application such as:

Language

Products

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Choose your option

Hours

Phone

Email

Location

Language

Your cart (0)

Order note

Estimate Shipping

Product Comparison

Your cart