Products


While we showcase many parts on our website, thousands more are available through our trusted partners.

If you're searching for a hard-to-find item or an alternative to an obsolete part, don’t hesitate to contact us—we’re here to help and will do our best to assist you.


Contact Us

264 products

PB-48

Fabco-Air

PB-48

Bore: 4"
Multi-Power® Series PA & PB
Single stage extend, 4 single stage retract
Strokes of 1/8" through 4" available
Original Pancake® II

PFA Series

Fabco-Air

PFA Series

PFA Series
Position Feedback Cylinders

The PFA Series is an economical
pneumatic linear actuator that contains
an internal Linear Resistive Transducer
(LRT). It is ideal for applications where
traditional magnetic position sensing is
not acceptable. Additionally, the PFA
Series is conducive where variations in
cylinder stroke and speed are required
or where an application calls for
continuous position monitoring.
• Operating pressure: 150 psi max.
• Recommended Media: Filtered, clean,
dry “non-condensing” compressed air.
Do not apply any fluids that may be
electrically conductive. Water-based
fluids should not be used.

PND-2

Fabco-Air

PND-2

Bore: 3/4"
Nonrotating, Twin Rod, Double Acting
Original Pancake® II

PND-3

Fabco-Air

PND-3

Bore: 1 1/16"
Nonrotating, Twin Rod, Double Acting
Original Pancake® II

PND-4

Fabco-Air

PND-4

Bore: 1 1/2"
Nonrotating, Twin Rod, Double Acting
Original Pancake® II

PND-5

Fabco-Air

PND-5

Bore: 2"
Nonrotating, Twin Rod, Double Acting
Original Pancake® II

PSD-1

Fabco-Air

PSD-1

Compact Air Cylinder - 1/2" Bore
Single Rod, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSD-2

Fabco-Air

PSD-2

Compact Air Cylinder - 3/4" Bore
Single Rod, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSD-3

Fabco-Air

PSD-3

Compact Air Cylinder - 1 1/16" Bore
Single Rod, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSD-4

Fabco-Air

PSD-4

Compact Air Cylinder - 1 1/2" Bore
Single Rod, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSD-5

Fabco-Air

PSD-5

Compact Air Cylinder - 2" Bore
Single Rod, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSD-6

Fabco-Air

PSD-6

Compact Air Cylinder - 2 1/2" Bore
Single Rod, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSD-7

Fabco-Air

PSD-7

Compact Air Cylinder - 3" Bore
Single Rod, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSD-8

Fabco-Air

PSD-8

Compact Air Cylinder - 4" Bore
Single Rod, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSR-1

Fabco-Air

PSR-1

Compact Air Cylinder - 1/2" Bore
Single Rod, Single Acting Acting,
Spring Retract (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSR-2

Fabco-Air

PSR-2

Compact Air Cylinder - 3/4" Bore
Single Rod, Single Acting Acting,
Spring Retract (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSR-3

Fabco-Air

PSR-3

Compact Air Cylinder - 1 1/16" Bore
Single Rod, Single Acting Acting,
Spring Retract (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSR-4

Fabco-Air

PSR-4

Compact Air Cylinder - 1 1/2" Bore
Single Rod, Single Acting Acting,
Spring Retract (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSR-5

Fabco-Air

PSR-5

Compact Air Cylinder - 2" Bore
Single Rod, Single Acting Acting,
Spring Retract (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSR-6

Fabco-Air

PSR-6

Compact Air Cylinder - 2 1/2" Bore
Single Rod, Single Acting Acting,
Spring Retract (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSR-7

Fabco-Air

PSR-7

Compact Air Cylinder - 3" Bore
Single Rod, Single Acting Acting,
Spring Retract (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSR-8

Fabco-Air

PSR-8

Compact Air Cylinder - 4" Bore
Single Rod, Single Acting Acting,
Spring Retract (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSX-1

Fabco-Air

PSX-1

Compact Air Cylinder - 1/2" Bore
Single Rod, Single Acting Acting,
Spring Extend (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSX-2

Fabco-Air

PSX-2

Compact Air Cylinder - 3/4" Bore
Single Rod, Single Acting Acting,
Spring Extend (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSX-3

Fabco-Air

PSX-3

Compact Air Cylinder - 1 1/16" Bore
Single Rod, Single Acting Acting,
Spring Extend (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSX-4

Fabco-Air

PSX-4

Compact Air Cylinder - 1 1/2" Bore
Single Rod, Single Acting Acting,
Spring Extend (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSX-5

Fabco-Air

PSX-5

Compact Air Cylinder - 2" Bore
Single Rod, Single Acting Acting,
Spring Extend (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSX-6

Fabco-Air

PSX-6

Compact Air Cylinder - 2 1/2" Bore
Single Rod, Single Acting Acting,
Spring Extend (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSX-7

Fabco-Air

PSX-7

Compact Air Cylinder - 3" Bore
Single Rod, Single Acting Acting,
Spring Extend (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PSX-8

Fabco-Air

PSX-8

Compact Air Cylinder - 4" Bore
Single Rod, Single Acting Acting,
Spring Extend (Model S Only)
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PTD-1

Fabco-Air

PTD-1

Compact Air Cylinder - 1/2" Bore
Double Rod Hole Through, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PTD-2

Fabco-Air

PTD-2

Compact Air Cylinder - 3/4" Bore
Double Rod Hole Through, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PTD-3

Fabco-Air

PTD-3

Compact Air Cylinder - 1 1/16" Bore
Double Rod Hole Through, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PTD-4

Fabco-Air

PTD-4

Compact Air Cylinder - 1 1/2" Bore
Double Rod Hole Through, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PTD-5

Fabco-Air

PTD-5

Compact Air Cylinder - 2" Bore
Double Rod Hole Through, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

PTD-6

Fabco-Air

PTD-6

Compact Air Cylinder - 2 1/2" Bore
Double Rod Hole Through, Double Acting
Original Pancake®
Features
  • Available in eight bore sizes: ½, ¾, 1 ⅛, 1 ⅝, 2, 2 ½, 3 and 4 inches
  • Standard stroke lengths up to 4 inches
  • Pressure rated to 250 psi pneumatic and 500 psi hydraulic service
  • Heavy wall to protect the bore from damage
  • Clear anodized cylinder bodies: clean, attractive appearance and corrosion resistance
  • Hard chrome-plated stainless steel piston rod adds longevity to the cylinder
  • Cylinders pre-lubed with Magnalube-G® grease
  • Magnetic piston option available for cylinder position sensing
  • Standard options and custom designs available
  • Numerous mounting options
  • Dial-A-Stroke® precision configuration for the end stroke
Technical Advantages
  • The cylinder bodies and bores are machined simultaneously from high-quality, solid aluminum bar stock resulting in excellent bore concentricity, plus high strength, rigidity and piston rod support.
  • The rod bushing — one of the air cylinder’s primary load bearing points — is made from a high-performance composite material for greater strength.
  • The piston bearing and shaft work together to ensure high reliability: The composite bearing polishes the 303 stainless steel shaft while minimizing o-ring wear to provide longer shaft life and a long-lasting seal.
  • Magnalube-G® Teflon-impregnated grease provides a long operating life and lubricates at a wide temperature range.

Hours

Mon - Thu 8:30am - 5:00pm

Fri 8:30am - 4:30pm

Closed Weekends

Phone

+1 905 606 2324

Email

sales@sempress.ca

Location

9-3250 Ridgeway Drive
Mississauga, Ontario
L5L 5Y6