ATL and BSA Linearmech Series
Robust and Reliable Linear Actuators
Linearmech electromechanical linear actuators are easy-to-use and reliable products. Great and convenient alternative to the use of pneumatic cylinders recommended in case of medium to low speed application, intermittent duty cycle operation and self-locking requirement when load is applied, both pull or push load.
LINEARMECH ATL and BSA Series linear actuators are right angle design, AC or DC motor always included. Aluminum alloy housing with high resistance. Input drive with worm gear.
ATL Series Acme Screw Drive Linear Actuators:
5 standard sizes available
Acme screw from Ø 13,5 mm to Ø 18 mm
Linear speed up to 150 mm/s
Load capacity push-pull up to 11.000 N
Electric motors available: AC 3-phase or 1-phase motor, DC motors (12V, 24V)
Long life lubricated, maintenance free
BSA Series Ball Screw Drive Linear Actuators:
4 standard sizes available
Ball screw from Ø 14 mm to Ø 20 mm
Linear speed up to 125 mm/s
Load capacity push-pull up to 9.000 N
Electric motors available: AC 3-phase or 1-phase motor, DC motors (12V, 24V)
Long life lubricated, maintenance free
Choose your option
ATL and BSA Series
Right Angle Design Linear Actuators
Rear hinged attachments, 90° motor mounting design.
High precision worm gearbox, ZI involute profile.
Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable).
ATL Series Acme Screw Drive Linear Actuators:
10 standard sizes available
Acme screw from Ø 13,5 mm to Ø 100 mm
Load capacity from 4 kN to 350 kN
Standard stroke length up to 800 mm, special stroke length also available upon request
BSA Series Ball Screw Drive Linear Actuators:
10 standard sizes available
Ball screw from Ø 14 mm to Ø 100 mm
Load capacity from 4 kN to 350 kN
Standard stroke length up to 800 mm, special stroke length also available upon request
Choose your option
Ball Nuts DCN Series
Double Cylindrical Ball Nuts
BS Series Ball Screws:
Available on different accuracy grade (ISO IT3, IT5, IT7)
Nominal diameter d0 [mm], in accordance with standards ISO 3408 and DIN 69051:
14, 16, 20, 25, 32, 40, 50, 63, 80, 100, 120
Lead Ph [mm], in accordance with standards ISO 3408 and DIN 69051:
4, 5, 6, 8, 10, 12, 15, 16, 20,25, 32, 40
Max. thread length up to 10 m (depending on the diameters and the length of the bar)
DCN Series Double Cylindrical Ball Nuts:
Available with zero backlash or preloaded
Different dimensions available (DIN 69051, customer’s specs or SERVOMECH design)
Materials:
Threaded shafts: alloy steel 42CrMo4 or 50CrMo4 (UNI EN 10083-1), quenched
Hardness of ball tracks within the range (58 … 61) HRc
Ball nuts: alloy steel 18 NiCrMo5 (UNI EN 10084), case-hardened
Hardness of surfaces in contact within the range (58 … 61) HRc
Ball recirculating elements: alloy steel, case-hardened, with a surface hardness (50 … 55) HRc or plastic material depending on the application requirements
Choose your option
Ball Nuts DFN Series
Double Ball Nuts with Flange.
BS Series Ball Screws:
Available on different accuracy grade (ISO IT3, IT5, IT7)
Nominal diameter d0 [mm], in accordance with standards ISO 3408 and DIN 69051:
14, 16, 20, 25, 32, 40, 50, 63, 80, 100, 120
Lead Ph [mm], in accordance with standards ISO 3408 and DIN 69051:
4, 5, 6, 8, 10, 12, 15, 16, 20,25, 32, 40
Max. thread length up to 10 m (depending on the diameters and the length of the bar)
DFN Series Double Ball Nuts with Flange:
Available with zero backlash or preloaded
Different dimensions available (DIN 69051, customer’s specs or SERVOMECH design)
Materials:
Threaded shafts: alloy steel 42CrMo4 or 50CrMo4 (UNI EN 10083-1), quenched
Hardness of ball tracks within the range (58 … 61) HRc
Ball nuts: alloy steel 18 NiCrMo5 (UNI EN 10084), case-hardened
Hardness of surfaces in contact within the range (58 … 61) HRc
Ball recirculating elements: alloy steel, case-hardened, with a surface hardness (50 … 55) HRc or plastic material depending on the application requirements
Choose your option
Ball Nuts SCN Series
Single Cylindrical Ball Nuts
BS Series Ball Screws:
Available on different accuracy grade (ISO IT3, IT5, IT7)
Nominal diameter d0 [mm], in accordance with standards ISO 3408 and DIN 69051:
14, 16, 20, 25, 32, 40, 50, 63, 80, 100, 120
Lead Ph [mm], in accordance with standards ISO 3408 and DIN 69051:
4, 5, 6, 8, 10, 12, 15, 16, 20,25, 32, 40
Max. thread length up to 10 m (depending on the diameters and the length of the bar)
SCN Series Single Cylindrical Ball Nuts:
Available with zero backlash or preloaded
Different dimensions available (DIN 69051, customer’s specs or SERVOMECH design)
Materials:
Threaded shafts: alloy steel 42CrMo4 or 50CrMo4 (UNI EN 10083-1), quenched
Hardness of ball tracks within the range (58 … 61) HRc
Ball nuts: alloy steel 18 NiCrMo5 (UNI EN 10084), case-hardened
Hardness of surfaces in contact within the range (58 … 61) HRc
Ball recirculating elements: alloy steel, case-hardened, with a surface hardness (50 … 55) HRc or plastic material depending on the application requirements
Choose your option
Ball Nuts SFN Series
Single Ball Nuts with Flange
BS Series Ball Screws:
Available on different accuracy grade (ISO IT3, IT5, IT7)
Nominal diameter d0 [mm], in accordance with standards ISO 3408 and DIN 69051:
14, 16, 20, 25, 32, 40, 50, 63, 80, 100, 120
Lead Ph [mm], in accordance with standards ISO 3408 and DIN 69051:
4, 5, 6, 8, 10, 12, 15, 16, 20,25, 32, 40
Max. thread length up to 10 m (depending on the diameters and the length of the bar)
SFN Series Single Ball Nuts with Flange:
Available with zero backlash or preloaded
Different dimensions available (DIN 69051, customer’s specs or SERVOMECH design)
Materials:
Threaded shafts: alloy steel 42CrMo4 or 50CrMo4 (UNI EN 10083-1), quenched
Hardness of ball tracks within the range (58 … 61) HRc
Ball nuts: alloy steel 18 NiCrMo5 (UNI EN 10084), case-hardened
Hardness of surfaces in contact within the range (58 … 61) HRc
Ball recirculating elements: alloy steel, case-hardened, with a surface hardness (50 … 55) HRc or plastic material depending on the application requirements
Choose your option
BG MF H Series
Bevel Gearboxes
Bevel gearboxes with high performances and compact dimensions. Suitable for operation at high input speed, up to 3000 rpm, with low noise level and high efficiency. Modular system with different versions available, additional outputs up to 6 shafts.
Bevel gears are made in high quality alloy steel, cut according to GLEASON spiroidal toothing system, casehardened, tempered and lapped in pairs. The accurate and consolidated manufacturing technology allows to produce bevel gears able to work with low noise level and with high efficiency.
BG MF H Series Input with IEC Motor Flange and Output with Hollow Shaft:
6 standard sizes available
Ratio from 1:1 to 1:4
Cubic shaped housing with 6 machined sides, each of them with 4 mounting threaded holes
Covers and shaft hubs machined with centring diameter with outward tolerance f7
Features:
Output shaft angular backlash: max. 10 arcmin (standard); on request controlled and reduced backlash,
averagely less than (5 … 6) arcmin.
Tapered roller bearings standard on all solid shafts and hollow output shaft;
ball bearings on hollow input shafts for motor flange execution.
Long-life grease lubrication for applications with low input speed.
Synthetic oil lubrication on request and in case of high input speed.
Assembling carried out entirely inside the company SERVOMECH, following all procedure steps to ensure a precise adjustment of the bearings and of the bevel gears to exalt following performances:
– noiseless operation
– high efficiency
– long service life
Choose your option
BG MF M1/S1/R1 Series
Bevel Gearboxes
Bevel gearboxes with high performances and compact dimensions. Suitable for operation at high input speed, up to 3000 rpm, with low noise level and high efficiency. Modular system with different versions available, additional outputs up to 6 shafts.
Bevel gears are made in high quality alloy steel, cut according to GLEASON spiroidal toothing system, casehardened, tempered and lapped in pairs. The accurate and consolidated manufacturing technology allows to produce bevel gears able to work with low noise level and with high efficiency.
BG MF M1/S1/R1 Series Input with IEC Motor Flange and Output with Solid Shaft:
6 standard sizes available
Ratio from 1:1 to 1:4
Cubic shaped housing with 6 machined sides, each of them with 4 mounting threaded holes
Covers and shaft hubs machined with centring diameter with outward tolerance f7
Features:
Output shaft angular backlash: max. 10 arcmin (standard); on request controlled and reduced backlash,
averagely less than (5 … 6) arcmin.
Tapered roller bearings standard on all solid shafts and hollow output shaft;
ball bearings on hollow input shafts for motor flange execution.
Long-life grease lubrication for applications with low input speed.
Synthetic oil lubrication on request and in case of high input speed.
Assembling carried out entirely inside the company SERVOMECH, following all procedure steps to ensure a precise adjustment of the bearings and of the bevel gears to exalt following performances:
– noiseless operation
– high efficiency
– long service life
Choose your option
BG S H Series
Bevel Gearboxes
Bevel gearboxes with high performances and compact dimensions. Suitable for operation at high input speed, up to 3000 rpm, with low noise level and high efficiency. Modular system with different versions available, additional outputs up to 6 shafts.
Bevel gears are made in high quality alloy steel, cut according to GLEASON spiroidal toothing system, casehardened, tempered and lapped in pairs. The accurate and consolidated manufacturing technology allows to produce bevel gears able to work with low noise level and with high efficiency.
BG S H Series Input with Solid Shaft and Output with Hollow Shaft:
6 standard sizes available
Ratio from 1:1 to 1:4
Cubic shaped housing with 6 machined sides, each of them with 4 mounting threaded holes
Covers and shaft hubs machined with centring diameter with outward tolerance f7
Features:
Output shaft angular backlash: max. 10 arcmin (standard); on request controlled and reduced backlash,
averagely less than (5 … 6) arcmin.
Tapered roller bearings standard on all solid shafts and hollow output shaft;
ball bearings on hollow input shafts for motor flange execution.
Long-life grease lubrication for applications with low input speed.
Synthetic oil lubrication on request and in case of high input speed.
Assembling carried out entirely inside the company SERVOMECH, following all procedure steps to ensure a precise adjustment of the bearings and of the bevel gears to exalt following performances:
– noiseless operation
– high efficiency
– long service life
Choose your option
BG S/R M/S/R Series
Bevel Gearboxes
Bevel gearboxes with high performances and compact dimensions. Suitable for operation at high input speed, up to 3000 rpm, with low noise level and high efficiency. Modular system with different versions available, additional outputs up to 6 shafts.
Bevel gears are made in high quality alloy steel, cut according to GLEASON spiroidal toothing system, casehardened, tempered and lapped in pairs. The accurate and consolidated manufacturing technology allows to produce bevel gears able to work with low noise level and with high efficiency.
BG S/R M/S/R Series Input and Output with Solid Shaft, Standard or Large Diameter:
6 standard sizes available
Ratio from 1:1 to 1:4
Cubic shaped housing with 6 machined sides, each of them with 4 mounting threaded holes.
Covers and shaft hubs machined with centering diameter with outward tolerance f7
Features:
Output shaft angular backlash: max. 10 arcmin (standard); on request controlled and reduced backlash,
averagely less than (5 … 6) arcmin.
Tapered roller bearings standard on all solid shafts and hollow output shaft;
ball bearings on hollow input shafts for motor flange execution.
Long-life grease lubrication for applications with low input speed.
Synthetic oil lubrication on request and in case of high input speed.
Assembling carried out entirely inside the company SERVOMECH, following all procedure steps to ensure a precise adjustment of the bearings and of the bevel gears to exalt following performances:
– noiseless operation
– high efficiency
– long service life
Choose your option
BS Series Screws
BS Series Ball Screws:
Available on different accuracy grade (ISO IT3, IT5, IT7)
Nominal diameter d0 [mm], in accordance with standards ISO 3408 and DIN 69051:
14, 16, 20, 25, 32, 40, 50, 63, 80, 100, 120
Lead Ph [mm], in accordance with standards ISO 3408 and DIN 69051:
4, 5, 6, 8, 10, 12, 15, 16, 20,25, 32, 40
Max. thread length up to 10 m (depending on the diameters and the length of the bar)
Ball Screw Nuts:
Available with zero backlash or preloaded
Different dimensions available (DIN 69051, customer’s specs or SERVOMECH design)
Materials:
Threaded shafts: alloy steel 42CrMo4 or 50CrMo4 (UNI EN 10083-1), quenched
Hardness of ball tracks within the range (58 … 61) HRc
Ball nuts: alloy steel 18 NiCrMo5 (UNI EN 10084), case-hardened
Hardness of surfaces in contact within the range (58 … 61) HRc
Ball recirculating elements: alloy steel, case-hardened, with a surface hardness (50 … 55) HRc or plastic material depending on the application requirements
Choose your option
CLA and CLB Linearmech Series
Integrated Cam Switches and Potentiometer
Linearmech electromechanical linear actuators are easy-to-use and reliable products. Great and convenient alternative to the use of pneumatic cylinders recommended in case of medium to low speed application, intermittent duty cycle operation and self-locking requirement when load is applied, both pull or push load.
LINEARMECH CLA and CLB Series linear actuators are right angle design, AC or DC motor always included. Aluminum alloy housing with high resistance. Input drive with worm gear.
CLA Series Acme Screw Drive Linear Actuators:
6 standard sizes available
Acme screw from Ø 13,5 mm to Ø 18 mm
Linear speed up to 100 mm/s
Load capacity push-pull up to 10.000 N
Electric motors available: AC 3-phase or 1-phase motor, DC motors (12V, 24V)
Long life lubricated, maintenance free
CLB Series Ball Screw Drive Linear Actuators:
2 standard sizes available
Ball screw Ø 14
Linear speed up to 125 mm/s
Load capacity push-pull up to 7.000 N
Electric motors available: AC 3-phase or 1-phase motor, DC motors (12V, 24V)
Long life lubricated, maintenance free
Choose your option
CLA and CLB Series
Integrated Cam Switches and Potentiometer
Rear hinged attachments, 90° motor mounting design. High precision worm gearbox, ZI involute profile. Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable).
CLA Series Acme Screw Drive Linear Actuators:
3 standard sizes available
Acme screw from Ø 18 mm to Ø 30 mm
Load capacity from 10 kN to 25 kN
Standard stroke length up to 800 mm, special stroke length also available upon request
CLB Series Ball Screw Drive Linear Actuators:
3 standard sizes available
Ball screw from Ø 20 mm to Ø 32 mm
Load capacity from 10 kN to 25 kN
Standard stroke length up to 800 mm, special stroke length also available upon request
Choose your option
HPA Series
Planetary Roller Screw Linear Actuators
Rear hinged attachments, in line or parallel motor mounting.
Precision planetary gearbox.
Lubrication with synthetic grease, gearbox long life lubricated. Fast and easy re-lubrication of the nut and rod guide with “homing” position.
HPA Series Planetary Roller Screw Actuators:
6 standard sizes available
Planetary roller screw from Ø 30mm to Ø 99 mm
Load capacity from 100 kN to 1.000 kN
Standard stroke length up to 1.000 mm, special stroke length also available upon request
Choose your option
HS Series
High Speed Screw Jacks
Ball screw jacks recommended for continuous operation, duty cycle up to 100%
Long life synthetic oil lubricated bevel gear
Bevel gear, GLEASON spiral toothing system, high efficiency and low noise functioning
Bevel gear ratio from 1:1 to 1:4
Angular backlash on output shaft max 10’ (available on request reduced backlash)
Cubic design housing, compact and robust
Input speed up to 3.000 rpm
Ball screw drive, travelling nut (Model B)
HS Series Ball Screw Jacks with Travelling Nut:
6 sizes standard available
Ball screw from Ø 25 mm to Ø 80 mm
Load capacity from 10 kN to 200 kN
Choose your option
HSA Series
Linear Actuators for High Speeds and High Loads
Rear hinged attachments, 90° motor mounting design. Gleason bevel gear.
Lubrication with synthetic grease, gearbox long life lubricated. Fast and easy re-lubrication of the nut with “homing” position.
HSA Series Ball Screw Drive Linear Actuators:
6 standard sizes available
Ball screw from Ø 25 mm to Ø 80 mm
Load capacity from 5 kN to 150 kN
Linear speed up to 1.500 mm/s
Standard stroke length up to 1.000 mm, special stroke length also available upon request
Choose your option
ILA Series
In-Line Modular Design Linear Actuators
Housing mounting with pins. In line or 90° design gearbox mounting.
Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable).
ILA.A Series Acme Screw Drive:
6 standard sizes available
Acme screw from Ø 22 mm to Ø 80 mm
Load capacity from 15 kN to 200 kN
Standard stroke length up to 1.500 mm, special stroke length also available upon request
ILA.B Series Ball Screw Drive:
6 standard sizes available
Ball screw from Ø 25 mm to Ø 80 mm
Load capacity from 15 kN to 250 kN
Standard stroke length up to 1.500 mm, special stroke length also available upon request
Choose your option
LMR Linearmech Series
Compact Design Linear Actuators
Linearmech electromechanical linear actuators are easy-to-use and reliable products. Great and convenient alternative to the use of pneumatic cylinders recommended in case of medium to low speed application, intermittent duty cycle operation and self-locking requirement when load is applied, both pull or push load.
LINEARMECH LMR Series linear actuators are right angle design, DC motor always included. Acme screw drive. Input drive with worm gear.
LMR Series Acme Screw Drive Linear Actuators:
3 standard sizes available
Acme screw from Ø 12 mm to Ø 16 mm
Linear speed up to 52 mm/s
Load capacity push-pull up to 6.000 N
Electric motors available: DC motors (12V, 24V, 36V)
IP rating IP65
Long life lubricated, maintenance free
Choose your option
MA BS Mod.A Series
High Efficiency Screw Jacks
Ball screw jacks recommended for continuous operation, duty cycle up to 100%
Long life synthetic oil lubricated worm gear
High precision worm gearbox, ZI involute profile, reduced angular backlash
Gearbox ratio from 1:4 to 1:32
Gearbox housing shape for a better heat dissipation
Input speed up to 3.000 rpm
Ball screw drive, travelling screw (Model A)
MA BS Mod.A Series Ball Screw Jacks with Travelling Screw:
8 sizes standard available
Ball screw from Ø 16 mm to Ø 120 mm
Load capacity from 5 kN to 350 kN
Choose your option
MA BS Mod.B Series
High Efficiency Screw Jacks
Ball screw jacks recommended for continuous operation, duty cycle up to 100%
Long life synthetic oil lubricated worm gear
High precision worm gearbox, ZI involute profile, reduced angular backlash
Gearbox ratio from 1:4 to 1:32
Gearbox housing shape for a better heat dissipation
Input speed up to 3.000 rpm
Ball screw drive, travelling nut (Model B)
MA BS Mod.B Series Ball Screw Jacks with Travelling Nut:
8 sizes standard available
Ball screw from Ø 16 mm to Ø 120 mm
Load capacity from 5 kN to 350 kN
Choose your option
MA Mod.A Series
High Efficiency Screw Jacks
Acme screw jacks recommended for intermittent duty cycle
Long life synthetic oil lubricated worm gear
High precision worm gearbox, ZI involute profile, reduced angular backlash
Gearbox ratio from 1:4 to 1:32
Gearbox housing shape for a better heat dissipation
Input speed up to 3.000 rpm
Acme screw drive, travelling screw (Model A)
Standard acme screw 1- or 2-starts
Upon request 3- or 4-starts available
MA Mod.A Series Acme Screw Jacks with Travelling Screw:
8 sizes standard available
Acme screw from Ø 18 mm to Ø 100 mm
Load capacity from 5 kN to 350 kN
Choose your option
MA Mod.B Series
High Efficiency Screw Jacks
Acme screw jacks recommended for intermittent duty cycle
Long life synthetic oil lubricated worm gear
High precision worm gearbox, ZI involute profile, reduced angular backlash
Gearbox ratio from 1:4 to 1:32
Gearbox housing shape for a better heat dissipation
Input speed up to 3.000 rpm
Acme screw drive, travelling nut (Model B)
Standard acme screw 1- or 2-starts
Upon request 3- or 4-starts available
MA Mod.B Series Acme Screw Jacks with Travelling Nut:
8 sizes standard available
Acme screw from Ø 18 mm to Ø 100 mm
Load capacity from 5 kN to 350 kN
Choose your option
SAM IL - SAM PD Series
Linear Servoactuators with Servomotors Mounting Interface
Linear servoactuators with universal interface for the assembly of third party servomotors.
High precision ball screw drive, low inertia and zero backlash, extreme positioning control, excellent for applications with high dynamics and high linear speeds.
Powerful alternative to the use of pneumatic cylinders in case of high dynamics (high speed, acceleration and deceleration, frequent back and forth inversion of the movement), precise positioning and low energy consumption.
Modular structure
In-line or parallel motor mounting configuration
Motor mounting with universal interface
7 standard sizes available
Ball screw from Ø 12 mm a Ø 40 mm
Load capacity up to 46 kN
Linear speed up to 1.500 mm/s
SAM IL Series Linear Servoactuators with In-Line Motor:
Motor assembly on the mechanical linear unit with bell housing and torsionally rigid clamping coupling for a better control and precision in movement.
Motor mounting with universal interface.
SAM PD Series Linear Servoactuators with Parallel Motor:
Transmission of motion driven by high performance, efficiency and accuracy timing belt.
Motor mounting with universal interface.
Available accessories:
Electric limit switches
Wide range of fixing elements (ISO standards 15552)
Choose your option
SJ BS Mod.B Series
Compact Design Screw Jacks
Ball screw jacks recommended for intermittent duty cycle (up to 70%)
Long life synthetic grease lubricated worm gear
High precision worm gearbox, ZI involute profile
Gearbox ratio from 1:4 to 1:36
Monobloc gearbox housing, robust and compact shape
Input speed up to 1.500 rpm
Ball screw drive, travelling nut (Model B)
SJ BS Mod.B Series Ball Screw Jacks with Travelling Nut:
11 sizes standard available
Ball screw from Ø 16 mm to Ø 140 mm
Load capacity from 5 kN to 800 kN
Choose your option
SJ Mod.A Series
Compact Design Screw Jacks
Acme screw jacks recommended for intermittent duty cycle
Long life synthetic grease lubricated worm gear
High precision worm gearbox, ZI involute profile
Gearbox ratio from 1:4 to 1:36
Monobloc gearbox housing, robust and compact shape
Input speed up to 1.500 rpm
Acme screw drive, travelling screw (Model A)
Acme screw 1- or 2-starts
SJ Mod.A Series Acme Screw Jacks with Travelling Screw:
14 sizes standard available
Acme screw from Ø 18 mm to Ø 160 mm
Load capacity from 5 kN to 1.000 kN
Choose your option
SJ Mod.B Series
Compact Design Screw Jacks
Acme screw jacks recommended for intermittent duty cycle
Long life synthetic grease lubricated worm gear
High precision worm gearbox, ZI involute profile
Gearbox ratio from 1:4 to 1:36
Monobloc gearbox housing, robust and compact shape
Input speed up to 1.500 rpm
Acme screw drive, travelling nut (Model B)
Acme screw 1- or 2-starts
SJ Mod.B Series Acme Screw Jacks with Travelling Nut:
14 sizes standard available
Acme screw from Ø 18 mm to Ø 160 mm
Load capacity from 5 kN to 1.000 kN
Choose your option
TMA Series
Trunnion Mounting Linear Actuators
Trunnion mounting housing fixed with pins or bronze bushes.
High precision worm gearbox, ZI involute profile.
Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable).
TMA Series Acme Screw Drive:
6 standard sizes available
Acme screw from Ø 22 mm to Ø 80 mm
Load capacity from 15 kN to 200 kN
Standard stroke length up to 1.500 mm, special stroke length also available upon request
Choose your option
UAL and UBA Linearmech Series
Parallel Design Linear Actuators
Linearmech electromechanical linear actuators are easy-to-use and reliable products. Great and convenient alternative to the use of pneumatic cylinders recommended in case of medium to low speed application, intermittent duty cycle operation and self-locking requirement when load is applied, both pull or push load.
LINEARMECH UAL and UBA Series linear actuators are parallel design, DC motor always included. Aluminium alloy housing with high resistance. Input drive with high precision timing belt transmissions.
UAL Series Acme Screw Drive Linear Actuators:
Acme screw Ø 14 mm
Linear speed up to 600 mm/s
Load capacity push-pull up to 500 N
Electric motors available: DC motors (12V, 24V)
Long life lubricated, maintenance free
UBA Series Ball Screw Drive Linear Actuators:
Ball screw Ø 14
Linear speed up to 500 mm/s
Load capacity push-pull up to 500 N
Electric motors available: DC motors (12V, 24V)
Long life lubricated, maintenance free
Choose your option
UAL and UBA Series
Parallel Design Linear Actuators
Rear hinged attachments, parallel motor mounting design.
High precision timing belt transmissions.
Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable).
UAL Series Acme Screw Drive:
5 standard sizes available
Acme screw from Ø 13,5 mm to Ø 30 mm
Load capacity from 4 kN to 15 kN
Standard stroke length up to 800 mm, special stroke length also available upon request
UBA Series Ball Screw Drive:
5 standard sizes available
Ball screw from Ø 14 mm to Ø 32 mm
Load capacity from 4 kN to 15 kN
Standard stroke length up to 800 mm, special stroke length also available upon request