WC Branham

1707-00AB-01.50

Model: OVLBOOST™ 44 - 1.50 in. Stroke Air/Oil Intensifier, Single End Side Porting, 7.8:1 Ratio

Model: OVB44AB1.5

Air/Oil Intensifiers convert typical shop air, 80-100 psi, into hydraulic pressure. The benefit to you is using existing shop compressed air and boosting pressure by the specified ratio to achieve the desired hydraulic force. It will potentially reduce the need for additional hydraulic caliper disc brakes for your braking application, other system components, and save money.

WC Branham

1707-00AB-03.00

Model: OVLBOOST™ 44 - 3.00 in. Stroke Air/Oil Intensifier, Single End Side Port, 7.8:1 Ratio

ATTRIBUTES:
- 7.8:1 RATIO
- 100 PSI MAX AIR PRESSURE
- SINGLE END SIDE PORTING
- PNEUMATIC DUAL ACTING
- 5/8 DIA. CHROME HYDRAULIC ROD
- 3 INCH STROKE
- .920 CU-IN HYDRAULIC DISPLACEMENT

Low Profile, Aluminum Extrusion Body

Model: OVB44AB3.0

Air/Oil Intensifiers convert typical shop air, 80-100 psi, into hydraulic pressure. The benefit to you is using existing shop compressed air and boosting pressure by the specified ratio to achieve the desired hydraulic force. It will potentially reduce the need for additional hydraulic caliper disc brakes for your braking application, other system components, and save money.

WC Branham

1707-01AB-01.50

Model: OVLBOOST™ 44 - 1.50 in. Stroke Air/Oil Intensifier, Single End Rear Porting 7.8:1 Ratio

ATTRIBUTES:
- 7.8:1 RATIO
- 100 PSI MAX AIR PRESSURE
- SINGLE END REAR PORTING
- PNEUMATIC DUAL ACTING
- 5/8 DIA. CHROME HYDRAULIC ROD
- 3 INCH STROKE
- .460 CU-IN HYDRAULIC DISPLACEMENT

Low Profile, Aluminum Extrusion Body

Model: OVB44RAB1.5

Air/Oil Intensifiers convert typical shop air, 80-100 psi, into hydraulic pressure. The benefit to you is using existing shop compressed air and boosting pressure by the specified ratio to achieve the desired hydraulic force. It will potentially reduce the need for additional hydraulic caliper disc brakes for your braking application, other system components, and save money.

WC Branham

1707-01AB-03.00

Model: OVLBOOST™ 44 - 3.00 in. Stroke Air/Oil Intensifier, Single End Rear Port, 7.8:1 Ratio

ATTRIBUTES:
- 7.8:1 RATIO
- 100 PSI MAX AIR PRESSURE
- SINGLE END REAR PORTING
- PNEUMATIC DUAL ACTING
- 5/8 DIA. CHROME HYDRAULIC ROD
- 3 INCH STROKE
- .920 CU-IN HYDRAULIC DISPLACEMENT

Low Profile, Aluminum Extrusion Body

Model: OVB44RAB3.0

Air/Oil Intensifiers convert typical shop air, 80-100 psi, into hydraulic pressure. The benefit to you is using existing shop compressed air and boosting pressure by the specified ratio to achieve the desired hydraulic force. It will potentially reduce the need for additional hydraulic caliper disc brakes for your braking application, other system components, and save money.

WC Branham

1777-0000

Use with Branham H38, H47 and H200 Caliper Disc Brakes or other Applications Requiring Hydraulic Pressure Boost.

Model: INT05BK

5:1 Air/Oil Intensifier Kit. Includes Intensifier, Check Valve, Coupling and Reservoir

Kit - Includes Intensifier, Check Valve, Coupling and Reservoir

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1777-0001

Use with Branham H38, H47 and H200 Caliper Disc Brakes or other Applications Requiring Hydraulic Pressure Boost.

Model: INT05B

5:1 Air/Oil Intensifier, Buna-N Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1777-0002

Use with Branham H38, H47 and H200 Caliper Disc Brakes or other Applications Requiring Hydraulic Pressure Boost.

Model: INT05G

5:1 Air/Oil Intensifier, EPDM Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1778-0000

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT10BK

10:1 Air/Oil Intensifier, Buna-N Seals

Kit - Includes Intensifier, Check Valve, Coupling and Reservoir.

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1778-0001

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT10B

10:1 Air/Oil Intensifier, Buna-N Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1778-0003

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT10G

10:1 Air/Oil Intensifier, EPDM Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1779-0000

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT20BK

20:1 Air/Oil Intensifier, Buna-N Seals

Kit - Includes Intensifier, Check Valve, Coupling and Reservoir.

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1779-0001

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT20B

20:1 Air/Oil Intensifier, Buna-N Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1779-0003

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT20G

20:1 Air/Oil Intensifier, EPDM Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1780-0000

Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.

Model: INT18B

18:1 Air/Oil Intensifier, Buna-N Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1780-0001

Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.

Model: INT18BK

18:1 Air/Oil Intensifier, Buna-N Seals

Kit - Includes Check Valve, Coupling and Reservoir

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1780-0002

Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.

Model: INT18G

18:1 Air/Oil Intensifier, EPDM Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1781-0000

Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.

Model: INT09B

9:1 Air/Oil Intensifier, Buna-N Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1781-0001

Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.

Model: INT09BK

9:1 Air/Oil Intensifier, Buna-N Seals

Kit - Includes Check Valve, Coupling and Reservoir.

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1781-0004

Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.

Model: INT09G

9:1 Air/Oil Intensifier, EPDM Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1782-0000

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT36B

36:1 Air/Oil Intensifier, Buna-N Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1782-0001

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT36BK

36:1 Air/Oil Intensifier, Buna-N Seals

Kit - Includes Check Valve, Coupling and Reservoir

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

1782-0003

Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.

Model: INT36G

36:1 Air/Oil Intensifier, EPDM Seals

Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.

WC Branham

4004-0009

Model: P200SA

200 series, pneumatic single acting caliper disc brake sized for 5/32 inch thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs up to 16" Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 288 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0010

Model: P200SB

200 series, pneumatic single acting caliper disc brake sized for 1/4 inch thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs up to 16" Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 288 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0011

Model: P200SL

200 series, pneumatic single acting caliper disc brake sized for 3/8 inch thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs up to 16" Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 288 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0012

Model: P200SE

200 series, pneumatic single acting caliper disc brake sized for 1/2-inch-thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs up to 16" Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 288 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0017

Model: P200DA

WC Branham

4004-0018

Model: P200DB

WC Branham

4004-0019

Model: P200DL

WC Branham

4004-0020

Model: P200DE

WC Branham

4004-0025

Model: P47DA

47 series, pneumatic double acting caliper disc brake sized for 5/32 inch thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs with Unlimited Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 144 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0026

Model: P47DB

47 series, pneumatic double acting caliper disc brake sized for 1/4 inch thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs with Unlimited Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 144 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0030

Model: P47DL

47 series, pneumatic double acting caliper disc brake sized for 3/8 inch thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs with Unlimited Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 144 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0031

Model: P47DE

47 series, pneumatic double acting caliper disc brake sized for 1/2 inch thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs with Unlimited Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 144 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0036

Model: P47SA

47 series, pneumatic single acting caliper disc brake sized for 5/32 inch thick brake disc.

• Aluminum Construction
• Hardcoated
• Fits on Brake Discs with Unlimited Diameter
• Replaceable Friction Pads (WCB p/n 4000-1052)
• Dept. of Defense Approved Friction Pads
• Dynamic torque (inch/lb): 144 lbf per 100 psi x braking radius
• Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X

WC Branham

4004-0037

Model: P47SB

47 series, pneumatic single acting caliper disc brake sized for 1/4-inch-thick brake disc.

• • Aluminum Construction
  • Hardcoated
  • Fits on Brake Discs with Unlimited Diameter
  • Replaceable Friction Pads (WCB p/n 4000-1052)
  • Dept. of Defense Approved Friction Pads
  • Dynamic torque (inch/lb): 144 lbf per 100 psi x braking radius
  • Power Factor: 200 Series 4X, 38 Series 1X, 47 Series 2X