AAA Valves
While we showcase many parts on our website, thousands more are available through our trusted partners. If you're searching for a hard-to-find item, seek an alternative part, or require assistance with product selection, don’t hesitate to contact us — we’re here to help and will do our best to assist you.
ESR4
Port latéral - 1/2" NPTF
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, tiroir pilote. Le tiroir revient en position « C » à partir d'une vanne de commande auxiliaire fournie par l'utilisateur. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 160 et 25 psi. La pression de retour doit être supérieure ou égale à 25 psi. Si la pression de ligne est comprise entre 160 et 250 psi, ou inférieure à 25 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO8P
Montage sur plaque - Débit 1"
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESR16P
Sous-plaque montée - 1 1/2"
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, tiroir pilote. Le tiroir revient en position « C » à partir d'une vanne de commande auxiliaire fournie par l'utilisateur. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 160 et 25 psi. La pression de retour doit être supérieure ou égale à 25 psi. Si la pression de ligne est comprise entre 160 et 250 psi, ou inférieure à 25 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO16P
Sous-plaque montée - 1 1/2"
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESR4P
Sous-plaque montée - 1/2"
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, tiroir pilote. Le tiroir revient en position « C » à partir d'une vanne de commande auxiliaire fournie par l'utilisateur. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 160 et 25 psi. La pression de retour doit être supérieure ou égale à 25 psi. Si la pression de ligne est comprise entre 160 et 250 psi, ou inférieure à 25 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESR8P
Montage sur plaque - Débit 1"
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, tiroir pilote. Le tiroir revient en position « C » à partir d'une vanne de commande auxiliaire fournie par l'utilisateur. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 160 et 25 psi. La pression de retour doit être supérieure ou égale à 25 psi. Si la pression de ligne est comprise entre 160 et 250 psi, ou inférieure à 25 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO3P
Montage sur plaque de base - 3/8" NPTF
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO4P
Sous-plaque montée - 1/2"
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO12
Port latéral - 1 1/2" NPTF
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO8
Port latéral - 1" NPTF
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO6
Port latéral - 3/4" NPTF
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO3
Port latéral - 3/8" NPTF
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO4
Port latéral - 1/2"
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
ESO2
Port latéral - 1/4" NPTF
(plusieurs options disponibles, veuillez nous appeler)Solénoïde simple, 2 positions, rappel par ressort. Le tiroir revient à sa position initiale lorsque le solénoïde est désactivé. Ce type d'opérateur fonctionne de manière fiable avec des pressions de ligne comprises entre 150 et 50 psi. Si la pression de ligne est comprise entre 150 et 250 psi, ou inférieure à 50 psi et 28 po Hg, l'opérateur solénoïde doit être configuré pour utiliser une source de « pilotage externe ».
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGXZ
AAA Products International - Part Number: SY8PGXZ
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Valve Options: Factory assembled for “External Pilot” operation. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PMOP
AAA Products International - Part Number: SY8PMOP
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Solenoid Operator Form: Mold-Over coil, with 1/2"-14 NPT conduit connection, with 18" leads. | Valve Options: Non-locking, push pin style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8XT
AAA Products International - Part Number: SY8XT
| Side Ported 1" NPTF | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Valve Options: Tapped solenoid exhaust, 1/8" NPTF. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PL
AAA Products International - Part Number: SY8PL
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Solenoid Operator Form: "Classic” coil with 1/2"-14 NPT conduit connection, with 18" leads. | Valve Options: Dust excluder cap. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8X
AAA Products International - Part Number: SY8X
| Side Ported 1" NPTF | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Valve Options: No options selected | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGXO
AAA Products International - Part Number: SY8PGXO
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Valve Options: Locking, twist style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8XON
AAA Products International - Part Number: SY8XON
| Side Ported 1" NPTF | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Valve Options: Non-locking, twist style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PMO
AAA Products International - Part Number: SY8PMO
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Solenoid Operator Form: Mold-Over coil, with 1/2"-14 NPT conduit connection, with 18" leads. | Valve Options: Locking, twist style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGMON
AAA Products International - Part Number: SY8PGMON
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Solenoid Operator Form: Mold-Over coil, with 1/2"-14 NPT conduit connection, with 18" leads. | Valve Options: Non-locking, twist style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8Z
AAA Products International - Part Number: SY8Z
| Side Ported 1" NPTF | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Solenoid Operator Form: "Classic” coil with 1/2"-14 NPT conduit connection, with 18" leads. | Valve Options: Factory assembled for “External Pilot” operation. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGXL
AAA Products International - Part Number: SY8PGXL
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Valve Options: Dust excluder cap. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGXV
AAA Products International - Part Number: SY8PGXV
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Valve Options: High pressure solenoid, for “Internal Pilot” valves up to 300 psi. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGV
AAA Products International - Part Number: SY8PGV
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Solenoid Operator Form: "Classic” coil with 1/2"-14 NPT conduit connection, with 18" leads. | Valve Options: High pressure solenoid, for “Internal Pilot” valves up to 300 psi. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGX
AAA Products International - Part Number: SY8PGX
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Valve Options: No options selected | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8XV
AAA Products International - Part Number: SY8XV
| Side Ported 1" NPTF | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Valve Options: High pressure solenoid, for “Internal Pilot” valves up to 300 psi. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGXT
AAA Products International - Part Number: SY8PGXT
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Valve Options: Tapped solenoid exhaust, 1/8" NPTF. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8XZ
AAA Products International - Part Number: SY8XZ
| Side Ported 1" NPTF | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Valve Options: Factory assembled for “External Pilot” operation. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGXON
AAA Products International - Part Number: SY8PGXON
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Valve Options: Non-locking, twist style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8XOP
AAA Products International - Part Number: SY8XOP
| Side Ported 1" NPTF | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Closed cross over, all ports are blocked in the center position. | Valve Options: Non-locking, push pin style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGXOP
AAA Products International - Part Number: SY8PGXOP
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Valve Options: Non-locking, push pin style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGT
AAA Products International - Part Number: SY8PGT
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Solenoid Operator Form: "Classic” coil with 1/2"-14 NPT conduit connection, with 18" leads. | Valve Options: Tapped solenoid exhaust, 1/8" NPTF. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).
Choisissez votre option
AAA "Classic" Solenoid Controlled, Pilot Operated Air Valve SY8PGON
AAA Products International - Part Number: SY8PGON
| Subplate Mounted 1" Flow | Double solenoid, 3-position, spring centered. Spool returns to center, position “B”, when both coils are de-energized. | Spool Configuration: Float center, port 2 is connected to port 3, port 4 is connected to port 5, port 1 is blocked. | Solenoid Operator Form: "Classic” coil with 1/2"-14 NPT conduit connection, with 18" leads. | Valve Options: Non-locking, twist style, manual solenoid override. | Valve O-Ring Option: Viton for body styles 2, 3 & 3P, Buna-N for body styles 4, 6, 8, 12, 4P, 8P &16P. | Coil Voltage and Frequency: 120 Volts, 60 Hz |
If applicable, please confirm your required voltage:
24 volts, 60 Hz | 120 volts, 60 Hz | 240 volts, 60 Hz | 6 volts DC | 12 volts DC | 24 volts DC
Different O-ring materials (only applies to valve body O-rings) are possible for some models: -1 Neoprene for freon (-40°F to 225°F), -2 Silicon (-80°F to 400°F), -3 Viton for most aromatic gases (-20°F to 400°F, 600°F for short time). -4 Butyl Rubber (-60°F to 200°F). -5 Teflon (-250°F to 450°F). -7 Urethane, 70 Durometer (-65°F to 200°F). -9 Buna-N (-40°F to 250°F).