97L-STC (L)
BONOMI NORTH AMERICA
3-WAY CAVITY-FILLED, DIRECT MOUNT SS BALL SANITARY TRI-CLAMP ENDS
Direct mount, Stainless steel ANSI class 150 wafer-style flanged full port ball valve.
• Cavity-filled, stainless steel with Sanitary Tri-Clamp ends.
• Pressure rating 1/2” to 1”-1000 psi, 1-1/2” to 2”-800 psi, 2-1/2” to 3”-600psi, 4”-300 psi.
• Temperature range -20°F to 366°F.
• Live loaded stem packing.
• RPTFE seats & seals.
• All stainless steel external components.
• ISO 5211 mounting pad with square stem.
• Live loaded stem packing design.
97L-STC - 97T-STC: size 1/2” to 4”.
Choose your option
97L150
BONOMI NORTH AMERICA
L-PORT
3-way ANSI 150 direct mount stainless steel, block body, full port ball valve.
• ANSI 150 full port flanged.
• ISO 5211 mounting pad.
• Reinforced TFE seats and seals.
• Multiple chevron style stem packing.
• Investment cast and sand cast body construction.
• Meets International standards.
• 1000 PSI WOG.
• T and L port designs.
97L150 - 97T150: sizes 1/2” to 6”.
Choose your option
97T
BONOMI NORTH AMERICA
T-PORT
3-way direct mount stainless steel, block body, full port ball valve.
• 1000 PSI WOG.
• ISO 5211 mounting pad.
• Live load stem packing.
• Investment cast and sand cast body construction.
• Meets International standards.
• T, L, and double L port designs.
• Live loaded stem packing design.
97L - 97T - 97X: size 1/4” to 4”.
Choose your option
97T-STC (T)
BONOMI NORTH AMERICA
3-WAY CAVITY-FILLED, DIRECT MOUNT SS BALL SANITARY TRI-CLAMP ENDS
Direct mount, Stainless steel ANSI class 150 wafer-style flanged full port ball valve.
• Cavity-filled, stainless steel with Sanitary Tri-Clamp ends.
• Pressure rating 1/2” to 1”-1000 psi, 1-1/2” to 2”-800 psi, 2-1/2” to 3”-600psi, 4”-300 psi.
• Temperature range -20°F to 366°F.
• Live loaded stem packing.
• R.PTFE seats & seals.
• All stainless steel external components.
• ISO 5211 mounting pad with square stem.
• Live loaded stem packing design.
97L-STC - 97T-STC: size 1/2” to 4”.
Choose your option
97T150
BONOMI NORTH AMERICA
T-PORT
3-way ANSI 150 direct mount stainless steel, block body, full port ball valve.
• ANSI 150 full port flanged.
• ISO 5211 mounting pad.
• Reinforced TFE seats and seals.
• Multiple chevron style stem packing.
• Investment cast and sand cast body construction.
• Meets International standards.
• 1000 PSI WOG.
• T and L port designs.
97L150 - 97T150: sizes 1/2” to 6”.
Choose your option
97X
BONOMI NORTH AMERICA
DOUBLE L-PORT
3-way direct mount stainless steel, block body, full port ball valve.
• 1000 PSI WOG.
• ISO 5211 mounting pad.
• Live load stem packing.
• Investment cast and sand cast body construction.
• Meets International standards.
• T, L, and double L port designs.
• Live loaded stem packing design.
97L - 97T - 97X: size 1/4” to 4”.
Choose your option
9900101 - Pressure Gauge 1/4''
Model: 9900101
Gauge Ø 63 1/4'' 012 bar
Use with:
FRL 400 1 20 RMSA
FRL 400 1 1/4 20 RMSA
FRL 400 1 1/2 20 RMSA
FRL 400 2 20 RMSA
Choose your option
9900101 - Pressure Gauge 1/8''
Model: 9800101
Gauge Ø 50 1/8'' 012 bar
Use with:
FRL 1/4 20 08 RMSA
FRL 3/8 20 08 RMSA
FRL 1/2 20 08 RMSA
Choose your option
9M70R
The GLOBE compact vane air motors are motors with one or more in integrated planetary gearboxes. Because of this design many different speeds and torques are possible. The motors are commonly used in machine building, as tools or in places with very limited spaces. GLOBE's compact vane motors have a power range from 0,27 kW/0.36 PK up to 1 kW/1.36 PK. Contact us for more information, or download the brochure.
Choose your option
Accessories Vacuum Suction Cups
Vacuum Suction Cups
Suction cups and suction plates for handling flat, smooth workpieces such as glass which depend on high lateral forces. Bellow suction cups for gentle handling of, for example, automotive glass as well as handling of visible parts made of glass while leaving few marks.
The effectiveness of the suction cup can be increased with accessory parts. Suction cup inserts and covers ensure mark free gripping of the workpieces.
Choose your option
AIR DRIVEN LIQUID PRESSURE TEST SYSTEMS
Working with liquids under high pressure can be dangerous, which is why we offer GLOBE liquid pressure test equipment. GLOBE's liquid high pressure test systems are suitable for performing both strength and tightness tests. Whether you are looking for hydrostatic test equipment or require a specific solution, we are here to help.
Choose your option
AIR DRIVEN LIQUID PUMPS
GLOBE's air driven liquid pumps are often used in test systems, however the individual high pressure pumps are also suitable for many other applications. The biggest advantages of these pumps are the driving pressure of 1 BAR (15 PSI) and the standard stainless steel parts, including the housing. This ensures high quality in combination with a long service life. For assistance, feel free to contact us for more information.
Choose your option
Air Lifting Bags - Air Lifting Bag for Extracting Block
The air lifting bag is part of the essential equipment dedicated to the extraction of blocks of marble, granite or any other stone. Indeed, its low thickness when empty allows it to be easily inserted in the sawing trenches. Several inflatable cushions are used simultaneously to spread the blocks of stone. They are maintained at a certain level by means of anchoring cables.
In addition, filled with air via a compressor, the quarry airbag spreads the rock evenly. This is followed by overlapping or shifting of the cushions until the stone blocks are tilted.
In the range of air lifting bags dedicated to the extraction of objects, you will also find the high-pressure air lifting bag.
Choose your option
Air Lifting Bags - Cylindrical Air Lifting Bag- CLC
The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.
Its thickness when empty is very low, making it easy to install in small spaces.
Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.
The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.
For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.
Choose your option
Air Lifting Bags - High-Pressure Air Lifting Bag - CLT
The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.
Choose your option
Air Lifting Bags - Low-Pressure Air Lifting Bag - CBP
The CBP low-pressure air lifting bag has a parallelepipedic inflated shape. It allows to lift quickly and at great height any type of load from 1 to 5 tons.
Its dimensions of 25 mm when empty allow it to be installed in narrow passages. Moreover, this lifting system offers a significant lifting height, between 400 and 760 mm, depending on the dimensions.
This low-pressure air lifting bag can be inflated from an air compressor, with a pressure of 0.5 bar. However, it can also be inflated from a vehicle exhaust outlet. Therefore, the system is completely autonomous. Many accessories are available to ensure the pressurization.
Its low weight, its handling handles, and its designed markings facilitate the transport and the installation of the low-pressure air lifting bag. For an even greater stroke, it is possible to superimpose cousins.
Assembled by hot vulcanization, it is resistant to many aggressions: abrasion, friction, nature of the ground, … Indeed, as a real pneumatic jack, the CBP is indispensable on sand, earth or mud. For example, it is an essential tool for removing mud from a vehicle.
In the range of inflatable lifting cushions dedicated to the pneumatic lifting of vehicles, there is also the stack bag or the high-pressure air lifting bag.
Choose your option
Air Lifting Bags - Stack Bag- CPF
Unlike the other ranges (CLT and CBP), the stack bag has the particularity. This cushion has a flat, non-slip surface. This guarantees the stability of the load. They can be stacked up to 3 cushions to reach a stable and secure lifting height of more than 500 mm. The airbag has a positioning mark to reinforce the safety and use of the product.
Moreover, thanks to its lightness and its low thickness when empty (25 mm), the use of this pneumatic lifting cushion is simple and fast. This stack bag can be used for civil protection, maintenance, industry etc.
The pressurization of the pneumatic lifting systems is controlled by a remote-control box. Thus, the operator can work in complete safety. A valve limits the inflation pressure to 10 bar. We offer a wide range of accessories to meet all customer applications.
The range is composed of 5 models that can lift loads from 30 to 81 tons of thrust.
Choose your option
Annular Inflatable Jack
This range of annular inflatable jack is very efficient for isolation, clamping, clamping, pressing and handling applications.
Choose your option
AP20PCS - AP20PSS
CLASS 800 METAL SEATED
CARBON STEEL - STAINLESS STEEL 2 PIECES SCREWED HIGH TEMPERATURE
Metal seated floating ball valves, CLASS 800 bi-directional.
• 2-piece screwed body from barstock.
• Temperature range carbon steel valve -20°F to +662°F.
• Temperature range stainless steel valve -40°F to +662°F.
• Blow-out proof stem.
• PENTAFITE standard ball seats, other metal seats on request.
• API 598 Bubble Tight (Exceed ANSI B16.104/FCI70-2 CL.VI).
• Consult factory for temperatures between -50°F and 750°F.
• Adjustable, live-loaded graphite packing.
• NPT threaded female Std, SW on request.
• NACE MR01-75 compliant materials.
• 100 mm stem elongation on request.
• Butt welding ends with integral nipples available on request.
• Locking lever operator available on request.
Choose your option
AP606CS - AP606SS
SPLIT-BODY METAL SEATS
FLANGED BALL VALVES ANSI 600
Metal seated floating ball valves, bi-directional.
• 2-piece bolted body from barstock.
• Temperature range carbon steel valve: -20°F ÷+662°F.
• Temperature range stainless steel valve: -40°F ÷+662°F.
• Blow-out proof stem.
• PENTAFITE standard ball seats, other metal seats on request.
• For high temperature clean services.
• API 598 Bubble Tight (Exceed ANSI B16.104/ FCI 70-2 CL.VI).
• Adjustable, live-loaded graphite packing.
• 100 mm stem elongation STD.
• API 607 fire tested.
• Locking lever operator available on request.
• NACE MR01-75 compliant materials.
Choose your option
AP60CS - AP60SS
SPLIT-BODY METAL SEATS
FLANGED BALL VALVES ANSI 300
Metal seated floating ball valves, bi-directional.
• 2-piece bolted body from barstock.
• Temperature range carbon steel valve: -20°F ÷+662°F.
• Temperature range stainless steel valve: -40°F ÷+662°F.
• Blow-out proof stem.
• PENTAFITE standard ball seats, other metal seats on request.
• For high temperature clean services.
• API 598 Bubble Tight (Exceed ANSI B16.104/ FCI 70-2 CL.VI.)
• Adjustable, live-loaded graphite packing.
• API 598 Inspection and testing
• 100 mm stem elongation on request.
• API 607 fire tested.
• Locking device for lever operator available on request.
• NACE MR01-75 compliant materials.
Choose your option
AP64CS - AP64SS
SPLIT-BODY METAL SEATS
FLANGED BALL VALVES ANSI 150
Metal seated floating ball valves, bi-directional.
• 2-piece bolted body from barstock
• Temperature range carbon steel valve: -20°F to +662°F.
• Temperature range stainless steel valve: -40°F to +662°F.
• Blow-out proof stem.
• PENTAFITE standard ball seats, other metal seats on request.
• For high temperature clean services.
• 100 mm stem elongation on request.
• Adjustable, live-loaded graphite packing.
• API 598 inspection and testing.
• API 607 fire tested.
• Locking lever operator available on request.
• NACE MR01-75 compliant materials.
Choose your option
Choose your option
Choose your option
Area Gripping Systems FMHD
Area Gripping Systems and End Effectors
Area gripping systems and end effectors are gripping systems that can be attached directly on the robot.
The area gripping system FMHD can be integrated into systems quickly and efficiently and is equipped with a connection for external vacuum generation. Due to its integrated vacuum reservoir and robust, easy-to-maintain design, this gripper is particularly well suited to performing handling tasks under demanding environmental conditions. In addition, these grippers are ideal for operation with industrial robots and gantries due to their low weight and compact dimensions.
Choose your option
Area Gripping Systems FQE
Area Gripping Systems and End Effectors
Area gripping systems and end effectors are gripping systems that can be attached directly on the robot.
Configurable universal gripper with integrated or external vacuum generation for handling workpieces, e.g. in intralogistics
Choose your option
Area Gripping Systems FXCB / FMCB
Area Gripping Systems and End Effectors
Area gripping systems and end effectors are gripping systems that can be attached directly on the robot.
The area gripping system FXCB/FMCB is ideal for stationary handling tasks with collaborative robots. It is suitable for handling workpieces regardless of size and geometry. The area gripping system is equipped with an integrated pneumatic vacuum generation. Its extremely low weight and rounded shape make this gripper particularly well suited for HRC operation (Human-Robot-Collaboration). Thanks to the innovative product design featuring increased contact surface and reduced impact forces, the gripper fulfills the requirements of ISO TS 15066 (Safety standards for collaborative industrial robot systems).
Choose your option
Army Fuel Bladder - Dynamic
This army fuel bladder called Dynamic is dedicated to the storage and transportation of fuel or drinking water. It is designed to be mounted on a truck bed. However, for specific needs, you can install it on board aircraft or boats. The tank is equipped with longitudinal skirts and fastening straps. These accessories ensure a quick and easy installation on the platform. Furthermore, the stability of the vehicle is perfectly ensured, even in extreme conditions. The tank is resistant to extreme weather conditions.
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option