Inflatable System for GSS Hydraulic Testing
Pronal has designed an inflatable stopper system for implementing hydraulic tests on superheater dryer units (GSS).
Choose your option
Inflatable Trench Shield - Smartshore
Available sizes: 2230x1420 & 2670x1490
Pronal’s Inflatable Trench Shield Smartshore ensures worker safety during trenching or excavation works. It is a key tool to protect them from crumbling. These systems use two inflatable cushions that once inflated are held in place by braces. These cushions can reinforce trench walls up to 2m deep. For trenches less than 1.30m deep, the terrain density and ground consistency need to be taken into account. This is why Smartshore cushions can be used horizontally in these situations. Inflatable trench shield systems can be folded up and reused.
Choose your option
Inline Ejectors
Vacuum Generators
Vacuum generators provide the required vacuum. The vacuum is generated either pneumatically (ejectors) or electrically (pumps, blowers).
Inline ejectors are installed directly in the hose line between the compressed air supply and the suction cups.
Choose your option
ITSC-164
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, clockwise, 4x90°, 2.5/8 bar, M5
| TORQUE (Ncm) | 136 |
| STROKE ° | 4x90° |
| UOM | NR |
| Weight [Gr] | 320 |
Choose your option
Choose your option
ITSC-164A
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, counterclockwise, 4x90°, 2.5/8 bar, M5
| TORQUE (Ncm) | 136 |
| STROKE ° | 4x90° |
| UOM | NR |
| Weight [Gr] | 320 |
Choose your option
Choose your option
ITSC-166
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, clockwise, 6x60°, 2.5/8 bar, M5
| TORQUE (Ncm) | 167 |
| STROKE ° | 6x60° |
| UOM | NR |
| Weight [Gr] | 320 |
Choose your option
Choose your option
ITSC-166A
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, counterclockwise, 6x60°, 2.5/8 bar, M5
| TORQUE (Ncm) | 167 |
| STROKE ° | 6x60° |
| UOM | NR |
| Weight [Gr] | 320 |
Choose your option
Choose your option
ITSC-168
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, clockwise, 8x45°, 2.5/8 bar, M5
| TORQUE (Ncm) | 181 |
| STROKE ° | 8x45° |
| UOM | NR |
| Weight [Gr] | 320 |
Choose your option
Choose your option
ITSC-168A
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, counterclockwise, 8x45°, 2.5/8 bar, M5
| TORQUE (Ncm) | 181 |
| STROKE ° | 8x45° |
| UOM | NR |
| Weight [Gr] | 320 |
Choose your option
Choose your option
ITSC-454
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, clockwise, 4x90°, 2.5/8 bar, G1/4
| TORQUE (Ncm) | 2290 |
| STROKE ° | 4x90° |
| UOM | NR |
| Weight [Gr] | 3740 |
Choose your option
ITSC-454A
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, counterclockwise, 4x90°, 2.5/8 bar, G1/4
| TORQUE (Ncm) | 2290 |
| STROKE ° | 4x90° |
| UOM | NR |
| Weight [Gr] | 3740 |
Choose your option
ITSC-456
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
| TORQUE (Ncm) | 2644 |
| STROKE ° | 6x60° |
| UOM | NR |
| Weight [Gr] | 3740 |
Choose your option
ITSC-456A
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, counterclockwise, 6x60°, 2.5/8 bar, G1/4
| TORQUE (Ncm) | 2644 |
| STROKE ° | 6x60° |
| UOM | NR |
| Weight [Gr] | 3740 |
Choose your option
Choose your option
ITSC-458
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, clockwise, 8x45°, 2.5/8 bar, G1/4
| TORQUE (Ncm) | 2821 |
| STROKE ° | 8x45° |
| UOM | NR |
| Weight [Gr] | 3960 |
Choose your option
Choose your option
ITSC-458A
Pneumatic indexing tables series ITSC - ITSC Description
• Clockwise or anticlockwise (A suffix) direction of rotation.
• High torque.
• Suitable for heavy loads.
• Through hole for cables and hoses.
• Reduced weight and overall dimensions.
Pneumatic rotary table, counterclockwise, 8x45°, 2.5/8 bar, G1/4
| TORQUE (Ncm) | 2821 |
| STROKE ° | 8x45° |
| UOM | NR |
| Weight [Gr] | 3960 |
Choose your option
Choose your option
Jaw Cutting Attachment
For turning out unhardened and grinding out hardened jaws. The adjusting jaws are reversible and infinitely variable. Using the jaw cutting attachment (BAV), the chuck can be put into the status it assumes later during workpiece machining (pre-clamping) within a few seconds. The turned clamping surfaces of the chuck jaws are thus form-fit and exactly concentric in the clamped state.
BAV Series
Choose your option
JBQ 1000 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 1000
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 400 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 400
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 600 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 600
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 650 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 650
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 700 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 700
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
JBQ 800 - Inflatable Formwork- JB Qualifix®
Inflatable Formwork- JB Qualifix
Model: JBQ 800
The JB QUALIFIX is an inflatable manhole formwork. It is an alternative to heavy wooden or metal formwork. This solution is used for sealing cylindrical manholes. The JB QUALIFIX acts like a standard manhole formwork. The operators slide the deflated tube into the manhole. Using a small compressor, they inflate it until the solution fits the entire wall for a perfect seal. Once inflated, the operators can pour the concrete all around, without dirtying the manhole. The use of this solution provides a better-quality manhole seal that will last over time.
Choose your option
Jointed Mountings
Mounting Elements
Schmalz offers a wide range of mounting possibilities for integrating suction cups or special grippers into a vacuum system.
Ball joints and Flexolinks permit the suction cups to adapt themselves better to uneven workpieces.
Choose your option
Key Bar Chucks with Quick Jaw Change System
The RÖHM key bar chucks with quick jaw change system are used successfully in areas where extremely high clamping forces, high concentricity and reliable long-term repeatability are required.
RÖHM key bar chucks with quick jaw change system prevail in two ways. On the one hand, the jaws can be turned, changed or offset in just a few seconds thanks to the quick-change system. This reduces setup times. On the other hand, the key bar system prevails with very high clamping forces and accuracy that is twice that which is specified in DIN 6386. This is made possible by the large and straight force transmission surfaces between the key bar and jaw teeth.
DURO-T Series | DURO-TA Series | DURO-TA XT Series
Choose your option
L58/L581 (LW)
Low Watt 2-Way Normally Open Valves
PeterPaul low watt valves are general purpose or safety valves for pneumatic and hydraulic applications. The versatility of these valves is increased to include the handling of hot air, hot water, refrigerants and many other media, by the use of different seals.
Choose your option
L58/L582 (LW)
Low Watt 2-Way Normally Closed Valves
PeterPaul low watt valves are general purpose or safety valves for pneumatic and hydraulic applications. The versatility of these valves is increased to include the handling of hot air, hot water, refrigerants and many other media, by the use of different seals.
Choose your option
L58/L583 (LW)
Low Watt 3-Way Normally Closed (exhaust to atmosphere)
PeterPaul low watt valves are general purpose or safety valves for pneumatic and hydraulic applications. The versatility of these valves is increased to include the handling of hot air, hot water, refrigerants and many other media, by the use of different seals.