L58/L583 (LW) (PE)
Low Watt 3-Way Normally Closed (piped exhaust)
PeterPaul low watt valves are general purpose or safety valves for pneumatic and hydraulic applications. The versatility of these valves is increased to include the handling of hot air, hot water, refrigerants and many other media, by the use of different seals.
Choose your option
Layer Gripping Systems
Vacuum Gripping Systems
Schmalz's complex vacuum gripping systems let you implement decisive productivity increases during automated processes. The systems range from layer and vacuum area gripping systems to ready-to-install vacuum suction spiders for use in all areas of automation.
Modular layer gripping systems for handling complete or partially loaded workpiece layers. Depending on the application, as a light version for loads up to 35 kg, as a standard version up to 250 kg and in the full version including global vacuum.
Choose your option
LC2
Forward/Reverse - Lever Control
Designed specifically for use with remote control valves
1/8" Port Size
Part: 006-900
Choose your option
LC2M
Forward/Reverse - Lever Control
Designed specifically for use with remote control valves
1/8" Port Size
Part: 006-902
Marine Grade - Corrosion Resistant
Choose your option
Lever Scroll Chucks
For positioning and conveying workpieces.
Plane spiral ring chuck in a cast iron design with clamping ring.
KRF series, 3-jaw | KRF series, 4-jaw | KRF series on base plate
Choose your option
Lever Sensor
The Pronal level sensor is an advanced solution designed for precise, real-time monitoring of liquid levels and corresponding volumes in flexible tanks. Leveraging its technology, the sensor ensures optimal management of available resources, whether it be water, fuel, oil, or any other industrial fluid. The level sensor is adaptable to all types of tanks and liquids, making it an ideal solution for various industrial sectors with specific needs for monitoring liquid volumes.
Choose your option
Lightweight Gripping Systems SLG
Area Gripping Systems and End Effectors
Area gripping systems and end effectors are gripping systems that can be attached directly on the robot.
3D-printed, ready-to-connect lightweight grippers for 2D or 3D freeform surfaces, suitable for high-speed pick-and-place applications. The lightweight grippers SLG are ideal for use on lightweight, Delta or SCARA robots for the automated handling of various workpieces. Thanks to 3D printing, robots with low payloads capacities can be used. Furthermore, the automated design process enables short procurement times.
Choose your option
LMR Linearmech Series
Compact Design Linear Actuators
Linearmech electromechanical linear actuators are easy-to-use and reliable products. Great and convenient alternative to the use of pneumatic cylinders recommended in case of medium to low speed application, intermittent duty cycle operation and self-locking requirement when load is applied, both pull or push load.
LINEARMECH LMR Series linear actuators are right angle design, DC motor always included. Acme screw drive. Input drive with worm gear.
LMR Series Acme Screw Drive Linear Actuators:
3 standard sizes available
Acme screw from Ø 12 mm to Ø 16 mm
Linear speed up to 52 mm/s
Load capacity push-pull up to 6.000 N
Electric motors available: DC motors (12V, 24V, 36V)
IP rating IP65
Long life lubricated, maintenance free
Choose your option
Choose your option
Choose your option
LS 22
Tapping Units
Pneumatic Lead Screw Tapping Unit LS 22
The LS 22 tap unit consists of a vane motor powered by compressed air, a planetary gearbox, lead screw, nut and a follower with cams to activate built-in switches. The design of the LS 22 tap unit is compact yet highly functional. The lead screw ensures high repeatability for threading operations.
Choose your option
MA BS Mod.A Series
High Efficiency Screw Jacks
Ball screw jacks recommended for continuous operation, duty cycle up to 100%
Long life synthetic oil lubricated worm gear
High precision worm gearbox, ZI involute profile, reduced angular backlash
Gearbox ratio from 1:4 to 1:32
Gearbox housing shape for a better heat dissipation
Input speed up to 3.000 rpm
Ball screw drive, travelling screw (Model A)
MA BS Mod.A Series Ball Screw Jacks with Travelling Screw:
8 sizes standard available
Ball screw from Ø 16 mm to Ø 120 mm
Load capacity from 5 kN to 350 kN
Choose your option
MA BS Mod.B Series
High Efficiency Screw Jacks
Ball screw jacks recommended for continuous operation, duty cycle up to 100%
Long life synthetic oil lubricated worm gear
High precision worm gearbox, ZI involute profile, reduced angular backlash
Gearbox ratio from 1:4 to 1:32
Gearbox housing shape for a better heat dissipation
Input speed up to 3.000 rpm
Ball screw drive, travelling nut (Model B)
MA BS Mod.B Series Ball Screw Jacks with Travelling Nut:
8 sizes standard available
Ball screw from Ø 16 mm to Ø 120 mm
Load capacity from 5 kN to 350 kN
Choose your option
MA Mod.A Series
High Efficiency Screw Jacks
Acme screw jacks recommended for intermittent duty cycle
Long life synthetic oil lubricated worm gear
High precision worm gearbox, ZI involute profile, reduced angular backlash
Gearbox ratio from 1:4 to 1:32
Gearbox housing shape for a better heat dissipation
Input speed up to 3.000 rpm
Acme screw drive, travelling screw (Model A)
Standard acme screw 1- or 2-starts
Upon request 3- or 4-starts available
MA Mod.A Series Acme Screw Jacks with Travelling Screw:
8 sizes standard available
Acme screw from Ø 18 mm to Ø 100 mm
Load capacity from 5 kN to 350 kN
Choose your option
MA Mod.B Series
High Efficiency Screw Jacks
Acme screw jacks recommended for intermittent duty cycle
Long life synthetic oil lubricated worm gear
High precision worm gearbox, ZI involute profile, reduced angular backlash
Gearbox ratio from 1:4 to 1:32
Gearbox housing shape for a better heat dissipation
Input speed up to 3.000 rpm
Acme screw drive, travelling nut (Model B)
Standard acme screw 1- or 2-starts
Upon request 3- or 4-starts available
MA Mod.B Series Acme Screw Jacks with Travelling Nut:
8 sizes standard available
Acme screw from Ø 18 mm to Ø 100 mm
Load capacity from 5 kN to 350 kN
Choose your option
Magnetic Grippers
Special Grippers
Special grippers can be used for applications in which regular suction cups cannot generate a vacuum. Schmalz offers a variety of special grippers with various shapes, sizes and principles of operation.
The magnetic grippers from Schmalz make it easier to handle complex laser-cut ferromagnetic workpieces. The permanent magnet is moved over compressed air. This is how the magnetic workpiece is gripped and deposited again.
Choose your option
Manifolds
STACKING VALVE BODIES
PeterPaul - BUILD YOUR OWN MANIFOLD
The stacking valve body creates the opportunity to tightly pack multiple solenoid valves into one package, with a common inlet or outlet depending on the needs of the application.
Choose your option
Matrix Area Grippers FMG
Area Gripping Systems and End Effectors
Area gripping systems and end effectors are gripping systems that can be attached directly on the robot.
Compact gripping module for the design of flexible area grippers
Choose your option
Measuring and Control Devices
Switches and System Monitoring
Devices for system monitoring are crucial to ensure the safe operation of a vacuum system. Schmalz offers a wide range of switches, measuring and control devices, as well as warning devices.
Vacuum regulators are mechanically adjustable and compensate for possible pressure variations from vacuum generators.
Choose your option
Mechanic Vacuum Switches
Switches and System Monitoring
Devices for system monitoring are crucial to ensure the safe operation of a vacuum system. Schmalz offers a wide range of switches, measuring and control devices, as well as warning devices.
Mechanical vacuum switch in electrical and pneumatic design with adjustable switching point.
Choose your option
