Products

Fabco-Air

AB-321-AK

Part: AB-321-AK

Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-321-O

Part: AB-321-O

Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-321-ODR

Part: AB-321-ODR

Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-321-OP

Part: AB-321-OP

Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Extended
Bore: 2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-321-X

Part: AB-321-X

Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-321-XDR

Part: AB-321-XDR

Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-321-XDRK

Part: AB-321-XDRK

Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-521-AK

Part: AB-521-AK

Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 2 1/2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-521-O

Part: AB-521-O

Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 2 1/2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-521-ODR

Part: AB-521-ODR

Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 2 1/2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-521-OP

Part: AB-521-OP

Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Extended
Bore: 2 1/2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-521-X

Part: AB-521-X

Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 2 1/2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-521-XDR

Part: AB-521-XDR

Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 2 1/2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-521-XDRK

Part: AB-521-XDRK

Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 2 1/2"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-721-AK

Part: AB-721-AK

Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 3"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-721-O

Part: AB-721-O

Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 3"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-721-ODR

Part: AB-721-ODR

Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 3"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-721-OP

Part: AB-721-OP

Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Extended
Bore: 3"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-721-X

Part: AB-721-X

Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 3"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-721-XDR

Part: AB-721-XDR

Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 3"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AB-721-XDRK

Part: AB-721-XDRK

Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 3"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AC-1221-AK

Part: AC-1221-AK

Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 4"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AC-1221-X

Part: AC-1221-X

Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 4"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AC-1221-XDR

Part: AC-1221-XDR

Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 4"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Fabco-Air

AC-1221-XDRK

Part: AC-1221-XDRK

Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 4"
Stroke: 1/8"

Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.

This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.

Schmalz

Accessories Vacuum Suction Cups

Vacuum Suction Cups

Suction cups and suction plates for handling flat, smooth workpieces such as glass which depend on high lateral forces. Bellow suction cups for gentle handling of, for example, automotive glass as well as handling of visible parts made of glass while leaving few marks.

The effectiveness of the suction cup can be increased with accessory parts. Suction cup inserts and covers ensure mark free gripping of the workpieces.

GLOBE Airmotors

AIR DRIVEN LIQUID PRESSURE TEST SYSTEMS

Working with liquids under high pressure can be dangerous, which is why we offer GLOBE liquid pressure test equipment. GLOBE's liquid high pressure test systems are suitable for performing both strength and tightness tests. Whether you are looking for hydrostatic test equipment or require a specific solution, we are here to help.

GLOBE Airmotors

AIR DRIVEN LIQUID PUMPS

GLOBE's air driven liquid pumps are often used in test systems, however the individual high pressure pumps are also suitable for many other applications. The biggest advantages of these pumps are the driving pressure of 1 BAR (15 PSI) and the standard stainless steel parts, including the housing. This ensures high quality in combination with a long service life. For assistance, feel free to contact us for more information.

Pronal

Air Lifting Bags - Air Lifting Bag for Extracting Block

The air lifting bag is part of the essential equipment dedicated to the extraction of blocks of marble, granite or any other stone. Indeed, its low thickness when empty allows it to be easily inserted in the sawing trenches. Several inflatable cushions are used simultaneously to spread the blocks of stone. They are maintained at a certain level by means of anchoring cables.

In addition, filled with air via a compressor, the quarry airbag spreads the rock evenly. This is followed by overlapping or shifting of the cushions until the stone blocks are tilted.

In the range of air lifting bags dedicated to the extraction of objects, you will also find the high-pressure air lifting bag.

Pronal

Air Lifting Bags - Cylindrical Air Lifting Bag- CLC

The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.

Its thickness when empty is very low, making it easy to install in small spaces.

Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.

The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.

For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.

Pronal

Air Lifting Bags - High-Pressure Air Lifting Bag - CLT

The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.

Pronal

Air Lifting Bags - Low-Pressure Air Lifting Bag - CBP

The CBP low-pressure air lifting bag has a parallelepipedic inflated shape. It allows to lift quickly and at great height any type of load from 1 to 5 tons.

Its dimensions of 25 mm when empty allow it to be installed in narrow passages. Moreover, this lifting system offers a significant lifting height, between 400 and 760 mm, depending on the dimensions.

This low-pressure air lifting bag can be inflated from an air compressor, with a pressure of 0.5 bar. However, it can also be inflated from a vehicle exhaust outlet. Therefore, the system is completely autonomous. Many accessories are available to ensure the pressurization.

Its low weight, its handling handles, and its designed markings facilitate the transport and the installation of the low-pressure air lifting bag. For an even greater stroke, it is possible to superimpose cousins.

Assembled by hot vulcanization, it is resistant to many aggressions: abrasion, friction, nature of the ground, … Indeed, as a real pneumatic jack, the CBP is indispensable on sand, earth or mud. For example, it is an essential tool for removing mud from a vehicle.

In the range of inflatable lifting cushions dedicated to the pneumatic lifting of vehicles, there is also the stack bag or the high-pressure air lifting bag.

Pronal

Air Lifting Bags - Stack Bag- CPF

Unlike the other ranges (CLT and CBP), the stack bag has the particularity. This cushion has a flat, non-slip surface. This guarantees the stability of the load. They can be stacked up to 3 cushions to reach a stable and secure lifting height of more than 500 mm. The airbag has a positioning mark to reinforce the safety and use of the product.

Moreover, thanks to its lightness and its low thickness when empty (25 mm), the use of this pneumatic lifting cushion is simple and fast. This stack bag can be used for civil protection, maintenance, industry etc.

The pressurization of the pneumatic lifting systems is controlled by a remote-control box. Thus, the operator can work in complete safety. A valve limits the inflation pressure to 10 bar. We offer a wide range of accessories to meet all customer applications.

The range is composed of 5 models that can lift loads from 30 to 81 tons of thrust.

Pronal

Annular Inflatable Jack

This range of annular inflatable jack is very efficient for isolation, clamping, clamping, pressing and handling applications.

Bonomi

AP20PCS - AP20PSS

CLASS 800 METAL SEATED

CARBON STEEL - STAINLESS STEEL 2 PIECES SCREWED HIGH TEMPERATURE

Metal seated floating ball valves, CLASS 800 bi-directional.

• 2-piece screwed body from barstock.
• Temperature range carbon steel valve -20°F to +662°F.
• Temperature range stainless steel valve -40°F to +662°F.
• Blow-out proof stem.
• PENTAFITE standard ball seats, other metal seats on request.
• API 598 Bubble Tight (Exceed ANSI B16.104/FCI70-2 CL.VI).
• Consult factory for temperatures between -50°F and 750°F.
• Adjustable, live-loaded graphite packing.
• NPT threaded female Std, SW on request.
• NACE MR01-75 compliant materials.
• 100 mm stem elongation on request.
• Butt welding ends with integral nipples available on request.
• Locking lever operator available on request.

Bonomi

AP606CS - AP606SS

SPLIT-BODY METAL SEATS

FLANGED BALL VALVES ANSI 600

Metal seated floating ball valves, bi-directional.

• 2-piece bolted body from barstock.
• Temperature range carbon steel valve: -20°F ÷+662°F.
• Temperature range stainless steel valve: -40°F ÷+662°F.
• Blow-out proof stem.
• PENTAFITE standard ball seats, other metal seats on request.
• For high temperature clean services.
• API 598 Bubble Tight (Exceed ANSI B16.104/ FCI 70-2 CL.VI).
• Adjustable, live-loaded graphite packing.
• 100 mm stem elongation STD.
• API 607 fire tested.
• Locking lever operator available on request.
• NACE MR01-75 compliant materials.