BE 22 SK
Air Turbines / Air Motors / Drilling Spindles
Pneumatic Drilling Unit BE 22 SK
The BE 22 SK consists of an air motor, a gear box and a body. The design is compact as well as robust. BE 22 SK comes in a wide range of speeds, and is available for lubrication-free operation.
Choose your option
BE 22 SKM
Milling Units
Pneumatic Milling Unit BE 22 SKM
The BE 22 SKM consists of an air motor, a gear box and a robust body. The design is compact as well as robust. BE 22/33 SKM comes in a wide range of speeds, and is available for lubrication- free operation.
Choose your option
BE 33
Pneumatic Drilling Units With Feed
Air Hydraulic Drilling Unit BE 33
The basic design of the BE 33 consists of a vane motor powered by compressed air, a pneumatic cylinder, and a closed hydraulic system. The total stroke length can be variably subdivided into rapid advance and working feed over the whole range. The throttle/check valve in the hydraulic system permits exact setting of the feed rate and high speed return.
Choose your option
BE 33 SK
Air Turbines / Air Motors / Drilling Spindles
Pneumatic Precision Drilling Unit BE 33 SK
The BE 33 SK consists of an air motor, a gear box and a body. The design is compact as well as robust. BE 33 SK comes in a wide range of speeds, and is available for lubrication-free operation.
Choose your option
BE 33 SKM
Milling Units
Pneumatic Milling Unit BE 33 SKM
The BE 33 SKM consists of an air motor, a gear box and a ro- bust body. The design is compact as well as robust. BE 22/33 SKM comes in a wide range of speeds, and is available for lubrication- free operation.
Choose your option
BE 48
Electro Pneumatic Drilling Units With Feed
Electro Pneumatic Drilling Unit BE 48
The BE 48-series is a flexible electro-pneumatic series of units in a modular design. The electric motor powers the spindle, while the feed is pneumatic. With the hydraulic feed control you can adjust the speed for best performance. The option linear sensor makes it possible to include functions such as multi- wall drilling and automatic chip removal. The series is available with integrated ER32 chuck as well as with multi-spindle heads.
Choose your option
BE(F) 22
Pneumatic Drilling Units With Feed
Air Hydraulic Drilling Unit BE(F) 22
The basic design of the BE(f) 22 consists of a vane motor powered by compressed air, a pneumatic cylinder, and a closed hydraulic system. The total stroke length can be variably subdivided into rapid advance and working feed across the whole range. The throttle/check valve in the hydraulic system permits exact setting of the feed rate and high speed return.
Choose your option
BE(F)P 22
Pneumatic Drilling Units With Feed
Air Hydraulic Precision Drilling Unit BE(F)P 22
The basic design of the BE(f)P 22 consists of a vane motor powered by compressed air, a pneumatic cylinder, and a closed hydraulic system. The BE(f)P 22 has a precision chuck for an extra high level of precision. Thanks to precision, separate and double ball bearings run-out amounts to a maximum of 0.01 mm. The total stroke length can be variably subdivided into rapid advance and working feed across the whole range . The throttle/check valve in the hydraulic system permits exact setting of the feed rate and high speed return.
Choose your option
BE(S) 21
Pneumatic Drilling Units With Feed
Air Operated Drilling Unit BE(S) 21
The BE 21 is an air operated drilling unit with feed. The design of the BE 21 makes it very suitable for drilling blind holes, reaming etc. We also offer a stainless version of this unit, the BES 21, ideal for operation in environments where water or other corrosive fluids are present.
Choose your option
BEG 48
Tapping Units
Electro Pneumatic Tapping Unit BEG 48
The BEG 48-series is a flexible electro-pneumatic unit in a modular design. The electric motor runs the spindle, while the feed is pneumatic. With the hydraulic feed control you can adjust feed rate in proportion to the pitch and the rpm. A tapping collect or a tapping spindle gives the unit the necessary length compensation. The series is available with JT2 taper or integrated ER32 chuck as well as with multi-spindle heads.
Choose your option
Bellows Suction Cups (Oval)
Vacuum Suction Cups
Schmalz product range includes a variety of suction cups with various shapes, sizes and materials, providing the right suction cup for every application. Suction cups consist of a elastomer part and a connection nipple. Please call if you require help making a selection.
Bellows suction cups with an oval shape are designed for long and narrow workpieces. Bellows suction cups are used if you need to handle workpieces with different heights, uneven surfaces or even fragile parts.
Choose your option
Bellows Suction Cups (Round)
Vacuum Suction Cups
Schmalz product range includes a variety of suction cups with various shapes, sizes and materials, providing the right suction cup for every application. Suction cups consist of a elastomer part and a connection nipple. Please call if you require help making a selection.
Bellows suction cups with a round shape are particularly suited for handling uneven and arched workpieces. Suction cups grip the workpiece fast and precisely due to their flat shape and small volume.
Choose your option
BEP 22 SK
Air Turbines / Air Motors / Drilling Spindles
Pneumatic Precision Drilling Unit BEP 22 SK
he BEP 22 SK is a precision drilling unit, equipped with a precision chuck. Thanks to separate and double ball bearings run-out amounts to a maximum of 0.01 mm. Its design is compact as well as robust. The BEP 22 SK comes in a wide range of speeds, and is available for lubrication-free operation.
Choose your option
BFVSTCE
BONOMI NORTH AMERICA
STAINLESS STEEL SANITARY BUTTERFLY VALVE
Stainless steel butterfly valve with EPDM seats and Sanitary Tri-Clamp Ends.
• AISI 316 L stainless steel.
• EPDM seat standard.
• Silicone or FKM (Viton) seats optional.
• Full port, sizes 1/2” to 8.”
• Sanitary Tri-Clamp Ends.
• Surface finish meets 3-A, FDA & USDA standards.
• 13-position, 304SS spring loaded lever lock handle 1/2” to 6”.
• 110 PSI @ 200°F.
BFVSTCE: size 1/2” to 8”.
Choose your option
BG MF H Series
Bevel Gearboxes
Bevel gearboxes with high performances and compact dimensions. Suitable for operation at high input speed, up to 3000 rpm, with low noise level and high efficiency. Modular system with different versions available, additional outputs up to 6 shafts.
Bevel gears are made in high quality alloy steel, cut according to GLEASON spiroidal toothing system, casehardened, tempered and lapped in pairs. The accurate and consolidated manufacturing technology allows to produce bevel gears able to work with low noise level and with high efficiency.
BG MF H Series Input with IEC Motor Flange and Output with Hollow Shaft:
6 standard sizes available
Ratio from 1:1 to 1:4
Cubic shaped housing with 6 machined sides, each of them with 4 mounting threaded holes
Covers and shaft hubs machined with centring diameter with outward tolerance f7
Features:
Output shaft angular backlash: max. 10 arcmin (standard); on request controlled and reduced backlash,
averagely less than (5 … 6) arcmin.
Tapered roller bearings standard on all solid shafts and hollow output shaft;
ball bearings on hollow input shafts for motor flange execution.
Long-life grease lubrication for applications with low input speed.
Synthetic oil lubrication on request and in case of high input speed.
Assembling carried out entirely inside the company SERVOMECH, following all procedure steps to ensure a precise adjustment of the bearings and of the bevel gears to exalt following performances:
– noiseless operation
– high efficiency
– long service life
Choose your option
BG MF M1/S1/R1 Series
Bevel Gearboxes
Bevel gearboxes with high performances and compact dimensions. Suitable for operation at high input speed, up to 3000 rpm, with low noise level and high efficiency. Modular system with different versions available, additional outputs up to 6 shafts.
Bevel gears are made in high quality alloy steel, cut according to GLEASON spiroidal toothing system, casehardened, tempered and lapped in pairs. The accurate and consolidated manufacturing technology allows to produce bevel gears able to work with low noise level and with high efficiency.
BG MF M1/S1/R1 Series Input with IEC Motor Flange and Output with Solid Shaft:
6 standard sizes available
Ratio from 1:1 to 1:4
Cubic shaped housing with 6 machined sides, each of them with 4 mounting threaded holes
Covers and shaft hubs machined with centring diameter with outward tolerance f7
Features:
Output shaft angular backlash: max. 10 arcmin (standard); on request controlled and reduced backlash,
averagely less than (5 … 6) arcmin.
Tapered roller bearings standard on all solid shafts and hollow output shaft;
ball bearings on hollow input shafts for motor flange execution.
Long-life grease lubrication for applications with low input speed.
Synthetic oil lubrication on request and in case of high input speed.
Assembling carried out entirely inside the company SERVOMECH, following all procedure steps to ensure a precise adjustment of the bearings and of the bevel gears to exalt following performances:
– noiseless operation
– high efficiency
– long service life
Choose your option
BG S H Series
Bevel Gearboxes
Bevel gearboxes with high performances and compact dimensions. Suitable for operation at high input speed, up to 3000 rpm, with low noise level and high efficiency. Modular system with different versions available, additional outputs up to 6 shafts.
Bevel gears are made in high quality alloy steel, cut according to GLEASON spiroidal toothing system, casehardened, tempered and lapped in pairs. The accurate and consolidated manufacturing technology allows to produce bevel gears able to work with low noise level and with high efficiency.
BG S H Series Input with Solid Shaft and Output with Hollow Shaft:
6 standard sizes available
Ratio from 1:1 to 1:4
Cubic shaped housing with 6 machined sides, each of them with 4 mounting threaded holes
Covers and shaft hubs machined with centring diameter with outward tolerance f7
Features:
Output shaft angular backlash: max. 10 arcmin (standard); on request controlled and reduced backlash,
averagely less than (5 … 6) arcmin.
Tapered roller bearings standard on all solid shafts and hollow output shaft;
ball bearings on hollow input shafts for motor flange execution.
Long-life grease lubrication for applications with low input speed.
Synthetic oil lubrication on request and in case of high input speed.
Assembling carried out entirely inside the company SERVOMECH, following all procedure steps to ensure a precise adjustment of the bearings and of the bevel gears to exalt following performances:
– noiseless operation
– high efficiency
– long service life
Choose your option
BG S/R M/S/R Series
Bevel Gearboxes
Bevel gearboxes with high performances and compact dimensions. Suitable for operation at high input speed, up to 3000 rpm, with low noise level and high efficiency. Modular system with different versions available, additional outputs up to 6 shafts.
Bevel gears are made in high quality alloy steel, cut according to GLEASON spiroidal toothing system, casehardened, tempered and lapped in pairs. The accurate and consolidated manufacturing technology allows to produce bevel gears able to work with low noise level and with high efficiency.
BG S/R M/S/R Series Input and Output with Solid Shaft, Standard or Large Diameter:
6 standard sizes available
Ratio from 1:1 to 1:4
Cubic shaped housing with 6 machined sides, each of them with 4 mounting threaded holes.
Covers and shaft hubs machined with centering diameter with outward tolerance f7
Features:
Output shaft angular backlash: max. 10 arcmin (standard); on request controlled and reduced backlash,
averagely less than (5 … 6) arcmin.
Tapered roller bearings standard on all solid shafts and hollow output shaft;
ball bearings on hollow input shafts for motor flange execution.
Long-life grease lubrication for applications with low input speed.
Synthetic oil lubrication on request and in case of high input speed.
Assembling carried out entirely inside the company SERVOMECH, following all procedure steps to ensure a precise adjustment of the bearings and of the bevel gears to exalt following performances:
– noiseless operation
– high efficiency
– long service life
Choose your option
Bin Picker SBPG
Area Gripping Systems and End Effectors
Area gripping systems and end effectors are gripping systems that can be attached directly on the robot.
Ready-to-connect vacuum gripper for automated bin picking
Choose your option
Bladder Rupture Relay - BRR
The Bladder Rupture Relay (BRR) is associated with the STP rubber bag transformer. It is an intelligent system capable of detecting any abnormal liquid present in the preservative membrane. For example, it can detect oil in case of leakage or condensation due to a dryer problem.
-
Kit contents:
- 1 optical sensor with a 5 m cable
- 1 connection unit
- 1 outside control relay with LEDs
- Temperature resistance: -20°/+100°C
First, the optical sensor is placed in the compensator, through the flange. The installation can be done during the assembly or during a maintenance operation. The connection box is used to connect the sensor to the external control unit installed in the transformer’s electrical panel.
Equipped with two LEDS, the control unit allows a permanent visual monitoring. The red LED indicates the anomaly; the green LED indicates the normal situation. Thus, the BRR Bladder Rupture Relay avoids unnecessary maintenance costs and time.
Choose your option
Bladder Surge Vessel - MAB
The bladder surge vessel is a compensating membrane. We always install them inside the tanks and grids under pressure. They can compensate the variation of the volume and to restrict the effects of water hammers.
Manufactured from elastomers and plastomers, this bladder surge vessel forms an interface for the protection of liquids by gases. This product is assembled by high frequency welding or by hot vulcanization in autoclave.
They are designed to:
- absorb water hammer: during a sudden closing or opening of a valve,
- soften pulsations: due to the diaphragm of a pump which generates pressure oscillations
- compensate for a pressure variation: when there is a loss of volume so the pressure can remain the same
Our compensation membranes prevent overpressures that could be harmful to the various elements of the installation.
These flexible membranes are completely watertight. We can customize them to fit the tank in which they will be installed.
Choose your option
Bleed Feed Valves
A Bleed/Feed valve acts as a 3-way, 3-position, closed center control valve, with two solenoid operators. As you can see from the pictures to the right, the Bleed/Feed valve is essentially two DASH 1 valves that have been mounted together with special porting, depending on customer requirements.
Choose your option
Blivet Army - Helitank
This blivet army, also called Helitank, is perfectly adapted to the transport of fuel or water under helicopters. The slinging is instantaneous; a single ring allows the tank to be hooked under the helicopter. The cross-shaped attachment skirts provide an anti-rotation device for perfect stability in flight. All the advantages of the flexible tank are combined: lightness, flexibility and solidity.
Choose your option
BOLT TENSIONING SYSTEMS
GLOBE Test Equipment's standard hydraulic bolt tensioning systems are built to last. These systems use oil with a very high pressure to pressurize the bolt, creating space between the nut and the flange. After this the nut can be tightened manually and when the hydraulic pressure releases, the bolt is tightened to withstand extreme conditions. GLOBE offers air or electrically driven tensioning systems. Do you have a specific requirement? Our team is ready to help.
Choose your option
BP 2-1/2 X 1
Part: BP 2-1/2 X 1
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 1"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 10
Part: BP 2-1/2 X 10
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 10"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 11
Part: BP 2-1/2 X 11
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 11"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 12
Part: BP 2-1/2 X 12
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 12"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 2
Part: BP 2-1/2 X 2
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 2"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 3
Part: BP 2-1/2 X 3
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 3"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 4
Part: BP 2-1/2 X 4
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 4"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 5
Part: BP 2-1/2 X 5
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 5"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 6
Part: BP 2-1/2 X 6
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 6"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 7
Part: BP 2-1/2 X 7
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 7"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 8
Part: BP 2-1/2 X 8
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 8"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
BP 2-1/2 X 9
Part: BP 2-1/2 X 9
Series BA & BP Multi-Power Boosters
Bore: 2 1/2"
Stroke: 9"
Please confirm the number of stages (pistons)
This product is highly customizable. Please specify your stages (power), mounting, and additional options. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.