HP 5 X 3/4
Part: HP 5 X 3/4
Series: HP Hi-Power Series
Bore: 5"
Stroke: 3/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 5 X 4
Part: HP 5 X 4
Series: HP Hi-Power Series
Bore: 5"
Stroke: 4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 1
Part: HP 6 X 1
Series: HP Hi-Power Series
Bore: 6"
Stroke: 1"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 1 1/2
Part: HP 6 X 1 1/2
Series: HP Hi-Power Series
Bore: 6"
Stroke: 1 1/2"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 1 1/4
Part: HP 6 X 1 1/4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 1 1/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 1 3/4
Part: HP 6 X 1 3/4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 1 3/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 1/2
Part: HP 6 X 1/2
Series: HP Hi-Power Series
Bore: 6"
Stroke: 1/2"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 1/4
Part: HP 6 X 1/4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 1/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 2
Part: HP 6 X 2
Series: HP Hi-Power Series
Bore: 6"
Stroke: 2"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 2 1/2
Part: HP 6 X 2 1/2
Series: HP Hi-Power Series
Bore: 6"
Stroke: 2 1/2"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 2 1/4
Part: HP 6 X 2 1/4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 2 1/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 2 3/4
Part: HP 6 X 2 3/4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 2 3/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 3
Part: HP 6 X 3
Series: HP Hi-Power Series
Bore: 6"
Stroke: 3"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 3 1/2
Part: HP 6 X 3 1/2
Series: HP Hi-Power Series
Bore: 6"
Stroke: 3 1/2"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 3 1/4
Part: HP 6 X 3 1/4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 3 1/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 3 3/4
Part: HP 6 X 3 3/4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 3 3/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 3/4
Part: HP 6 X 3/4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 3/4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HP 6 X 4
Part: HP 6 X 4
Series: HP Hi-Power Series
Bore: 6"
Stroke: 4"
This product is highly customizable. Please specify if you require a SINGLE or DOUBLE rod model. Options are not limited to bumpers, extensions, male rod threads, and seals. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
HPA Series
Planetary Roller Screw Linear Actuators
Rear hinged attachments, in line or parallel motor mounting.
Precision planetary gearbox.
Lubrication with synthetic grease, gearbox long life lubricated. Fast and easy re-lubrication of the nut and rod guide with “homing” position.
HPA Series Planetary Roller Screw Actuators:
6 standard sizes available
Planetary roller screw from Ø 30mm to Ø 99 mm
Load capacity from 100 kN to 1.000 kN
Standard stroke length up to 1.000 mm, special stroke length also available upon request
Choose your option
HS Series
High Speed Screw Jacks
Ball screw jacks recommended for continuous operation, duty cycle up to 100%
Long life synthetic oil lubricated bevel gear
Bevel gear, GLEASON spiral toothing system, high efficiency and low noise functioning
Bevel gear ratio from 1:1 to 1:4
Angular backlash on output shaft max 10’ (available on request reduced backlash)
Cubic design housing, compact and robust
Input speed up to 3.000 rpm
Ball screw drive, travelling nut (Model B)
HS Series Ball Screw Jacks with Travelling Nut:
6 sizes standard available
Ball screw from Ø 25 mm to Ø 80 mm
Load capacity from 10 kN to 200 kN
Choose your option
HSA Series
Linear Actuators for High Speeds and High Loads
Rear hinged attachments, 90° motor mounting design. Gleason bevel gear.
Lubrication with synthetic grease, gearbox long life lubricated. Fast and easy re-lubrication of the nut with “homing” position.
HSA Series Ball Screw Drive Linear Actuators:
6 standard sizes available
Ball screw from Ø 25 mm to Ø 80 mm
Load capacity from 5 kN to 150 kN
Linear speed up to 1.500 mm/s
Standard stroke length up to 1.000 mm, special stroke length also available upon request
Choose your option
Hybrid Clamps
A precisely centered and deformation-free setup is of utmost importance, especially for easily deformable workpieces, which require turning machining from all three sides within one working operation. Thanks to the combination of magnetic clamping force and deformation-free centering, workpieces, such as rings or other hard-to-grip parts having a wide range of sizes and contours, can be precisely clamped within seconds with the hybrid chuck MZMF
MZMF Series
Choose your option
Hydraulic Oil Separator - EXP
The EXP hydraulic oil separator allows the separation of hydraulic fluids contained in a tank. It looks like a synthetic rubber bladder that is perfectly deformable. It can be placed either inside or outside the tank, depending on the needs. Real auxiliary tanks, they can be made flat or shaped.
The product will compensate for volume variations. These variations can deteriorate the characteristics of the oil and the hydraulic system components. The compensators are permanently installed within the system, making it autonomous, and require no maintenance.
This hydraulic oil separator allows:
- To avoid emulsion, air in the oil, condensation in the tanks, or pollution of the oil by dust
- To eliminate turbulence and the risk of leaks, whatever the orientation of the tank.
- The operation in water immersion
These hydraulic compensators are available as standard. However, they can also be custom-made according to the dimensions of your tanks and the volume to be compensated.
Suggested Applications: Oil volume compensation, Food-stuff volume compensation.
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
Choose your option
I-121-O
Part: I-121-O
Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 1 1/8"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-121-ODR
Part: I-121-ODR
Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 1 1/8"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-121-X
Part: I-121-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 1 1/8"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-121-XDR
Part: I-121-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 1 1/8"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-121-XDRK
Part: I-121-XDRK
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 1 1/8"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-121-XK
Part: I-121-XK
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 1 1/8"
Stroke: 2"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-5-O
Part: I-5-O
Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 1/2"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.