I-5-ODR
Part: I-5-ODR
Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 1/2"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-5-X
Part: I-5-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 1/2"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-5-XDR
Part: I-5-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 1/2"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-7-O
Part: I-7-O
Series: Fabco-Air Original Pancake
Action: Single Rod / Single Acting / Spring Retracted
Bore: 3/4"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-7-ODR
Part: I-7-ODR
Series: Fabco-Air Original Pancake
Action: Double Rod / Single Acting / Spring Retracted
Bore: 3/4"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-7-X
Part: I-7-X
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting
Bore: 3/4"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-7-XDR
Part: I-7-XDR
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting
Bore: 3/4"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-7-XDRK
Part: I-7-XDRK
Series: Fabco-Air Original Pancake
Action: Double Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 3/4"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
I-7-XK
Part: I-7-XK
Series: Fabco-Air Original Pancake
Action: Single Rod / Double Acting / Non-Rotating 150 PSI Max.
Bore: 3/4"
Stroke: 1 1/4"
Metric cylinders are available. Part numbers begin with the prefix a M-. Please confirm if metric or imperial measurements are required.
This product is highly customizable. Options are not limited to seals, collars, bumpers, mounts, and finish. Please confirm additional options available by referencing Fabco-Air literature and/or please contact us.
Choose your option
ILA Series
In-Line Modular Design Linear Actuators
Housing mounting with pins. In line or 90° design gearbox mounting.
Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable).
ILA.A Series Acme Screw Drive:
6 standard sizes available
Acme screw from Ø 22 mm to Ø 80 mm
Load capacity from 15 kN to 200 kN
Standard stroke length up to 1.500 mm, special stroke length also available upon request
ILA.B Series Ball Screw Drive:
6 standard sizes available
Ball screw from Ø 25 mm to Ø 80 mm
Load capacity from 15 kN to 250 kN
Standard stroke length up to 1.500 mm, special stroke length also available upon request
Choose your option
Independent Chucks
Independent chucks from RÖHM are particularly successful and effective when force has top priority. Due to the increased rigidity and optimal wear behavior, they are especially suitable for the initial machining of irregular, regular and round workpieces and make high machining forces and a longer machine service life possible.
The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and easy clamping of irregular, regular, as well as round workpieces.
ES Series
Choose your option
Inflatable Bottle Gripper - MC 100
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 100 | 100 MM | 162 MM | 8.5 MM |
| Length: MC = 1320 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Inflatable Bottle Gripper - MC 20
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 20 | 20 MM | 36 MM | 7.5 MM |
| Length: MC = 1320 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Inflatable Bottle Gripper - MC 27
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 27 | 27 MM | 48 MM | 7.5 MM |
| Length: MC = 1320 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Inflatable Bottle Gripper - MC 27-101
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 27-101 | 31 MM | 46 MM | 18 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
Choose your option
Inflatable Bottle Gripper - MC 27-102
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 27-102 | 34 MM | 46 MM | 24 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
Choose your option
Inflatable Bottle Gripper - MC 27-103
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 27-103 | 37 MM | 46 MM | 26 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
Choose your option
Inflatable Bottle Gripper - MC 33
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 33 | 33 MM | 55 MM | 7.5 MM |
| Length: MC = 1320 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Inflatable Bottle Gripper - MC 33-101
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 33-101 | 39 MM | 55 MM | 18 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 33-102
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 33-102 | 44 MM | 55 MM | 24 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 33-103
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 33-103 | 43 MM | 55 MM | 26 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 37
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 37 | 37 MM | 63 MM | 7.5 MM |
| Length: MC = 1320 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Inflatable Bottle Gripper - MC 37-101
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 37-101 | 43MM | 62 MM | 18 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 37-102
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 37-102 | 48 MM | 62 MM | 24 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 37-103
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 37-103 | 48 MM | 62 MM | 26 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 47
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 47 | 47 MM | 79 MM | 7.5 MM |
| Length: MC = 1320 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Inflatable Bottle Gripper - MC 47-101
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 47-101 | 52 MM | 77 MM | 18 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 47-102
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 47-102 | 58 MM | 77 MM | 24 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 47-103
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 47-103 | 61 MM | 77 MM | 26 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 57
| Part No. | Inflated Diameter | Height | Thickness (Empty) |
| MC 57 | 57 MM | 93 MM (Empty) | 7.5 MM |
| Length: MC = 1320 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Inflatable Bottle Gripper - MC 57-101
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 57-101 | 59 MM | 93 MM | 18 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 57-102
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 57-102 | 68 MM | 93 MM | 24 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 57-103
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 57-103 | 71 MM | 93 MM | 26 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 67
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 67 | 67 MM | 108 MM | 8.5 MM |
| Length: MC = 1320 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The standard MC/ML pneumatic tube gripper long neck range is dedicated to pallet loading long neck bottles like Bordeaux and Burgundy wines, or others. Many diameters are available to adapt to the bottle volume.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping.
To meet quality requirements, the pneumatic tube grippers long neck is available with food-safe material coating on request. Depending on your installation, the grippers will be adapted with reinforcing, a dual air supply, a threaded ring height, etc.
For short-necked bottles, there is a range of pneumatic tube gripper short neck, or half pneumatic bottle gripper.
Choose your option
Inflatable Bottle Gripper - MC 67-101
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 67-101 | 74 MM | 108 MM | 18 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping
Choose your option
Inflatable Bottle Gripper - MC 67-102
| Part No. | Inflated Diameter | Height (Empty) | Thickness (Empty) |
| MC 67-102 | 79 MM | 108 MM | 24 MM |
| Length: MC = 1320 MM | Length: ML = 1460 MM | |||
| Pressure: 1 Bar (Max. 1.2 Bar) |
The Moulded MC pneumatic tube grippers are larger than standard MC grippers.
The standard lengths are 1320 mm. Supplied with air, these inflatable rings are used to handle layers of bottles by pinching the bottle necks. Their wide contact surface and soft textile finish that comes as close as possible to the bottle collar avoids any tipping