R62XXXA00
RM610 - 2" BSP - FACE MOUNT
| Max. power | 23 kW / 31.3 H.P. |
| Torque at max. power | 150 Nm / 110 lbs ft. |
| Stall torque | 235 Nm / 173 lbs ft. |
| Min. starting torque | 240 Nm / 177 lbs ft. |
| Max. speed of rotation | 2000 RPM |
Please note, new RM610 Piston Air Motors do not include mufflers. When purchasing a new motor, we strongly suggest purchasing muffler kit 619-905.
Choose your option
R62XXXA10
RM610 - 2" NPT - FACE MOUNT
| Max. power | 23 kW / 31.3 H.P. |
| Torque at max. power | 150 Nm / 110 lbs ft. |
| Stall torque | 235 Nm / 173 lbs ft. |
| Min. starting torque | 240 Nm / 177 lbs ft. |
| Max. speed of rotation | 2000 RPM |
Please note, new RM610 Piston Air Motors do not include mufflers. When purchasing a new motor, we strongly suggest purchasing muffler kit 619-905.
Choose your option
R63
2 position pneumatic swiveling units series R - R
• Modular with Gimapick system.
• Suitable for 90° or 180° rotation angles.
• Shock-absorbers.
• Ball bearings.
• Integrated rotating distributor of compressed air.
• Air feeding possible directly from the fixing plate.
• Optional magnetic sensors.
| TORQUE (Ncm) | 2244 |
| STROKE ° | 180° |
| UOM | NR |
| Weight [Gr] | 3400 |
Choose your option
R64
3 position pneumatic swiveling units series R - R
• Modular with Gimapick system.
• Suitable for 90° or 180° rotation angles.
• Shock-absorbers.
• Ball bearings.
• Integrated rotating distributor of compressed air.
• Air feeding possible directly from the fixing plate.
• Optional magnetic sensors.
| TORQUE (Ncm) | 2244 |
| STROKE ° | 180°/90° |
| UOM | NR |
| Weight [Gr] | 3200 |
Choose your option
Rain Water Storage Tank
This raw water storage tank is the standard solution. You can use it for permanent or temporary storage.
Today more than ever, the proper management of water and its preservation represent a considerable economic challenge. They are easy to transport to the site and quick to install. Therefore, PRONAL tanks are the ideal solution to easily build a water reserve.
These flexible tanks can be used:
- For rainwater harvesting
- As a crawl space
- As a water reserve on construction sites
Like our other tanks, it is made from highly resistant PVC coated fabric (1300 gr/m2) and assembled by high frequency welding. This fabric resists all temperatures from -30°C to +70°C.
Choose your option
RBT30
Pneumatic tilt units for EOATs series RBT - RBT
• Two adjustable rubber stroke end stops.
• High lifting torque.
• Safety lock, except RBT30.
• Optional magnetic sensors.
| TORQUE (Ncm) | 900 |
| STROKE ° | 90° |
| UOM | NR |
| Weight [Gr] | 520 |
Choose your option
Choose your option
RBT40
Pneumatic tilt units for EOATs series RBT - RBT
• Two adjustable rubber stroke end stops.
• High lifting torque.
• Safety lock, except RBT30.
• Optional magnetic sensors.
| TORQUE (Ncm) | 2400 |
| STROKE ° | 90° |
| UOM | NR |
| Weight [Gr] | 1050 |
Choose your option
Choose your option
RBT50
Pneumatic tilt units for EOATs series RBT - RBT
• Two adjustable rubber stroke end stops.
• High lifting torque.
• Safety lock, except RBT30.
• Optional magnetic sensors.
| TORQUE (Ncm) | 4500 |
| STROKE ° | 90° |
| UOM | NR |
| Weight [Gr] | 1600 |
Choose your option
Choose your option
RBT63
Pneumatic tilt units for EOATs series RBT - RBT
• Two adjustable rubber stroke end stops.
• High lifting torque.
• Safety lock, except RBT30.
• Optional magnetic sensors.
| TORQUE (Ncm) | 7800 |
| STROKE ° | 90° |
| UOM | NR |
| Weight [Gr] | 2600 |
Choose your option
Choose your option
RBT80
Pneumatic tilt units for EOATs series RBT - RBT
• Two adjustable rubber stroke end stops.
• High lifting torque.
• Safety lock, except RBT30.
• Optional magnetic sensors.
| TORQUE (Ncm) | 17400 |
| STROKE ° | 90° |
| UOM | NR |
| Weight [Gr] | 6400 |
Choose your option
Choose your option
RCV110
Remote Control Valve for RM110
Part: 111-900 Equal Power
Part: 111-901 Biased - Clockwise
Part: 111-902 Biased - Counter Clockwise
1/2" Ports
Choose your option
RCV210
Remote Control Valve for RM210
Part: 221-900 Equal Power
Part: 221-901 Biased - Clockwise
Part-221-902 Biased - Counter Clockwise
3/4" Ports
Choose your option
RCV310
Remote Control Valve for RM310
Part: 321-900 Equal Power
Part: 321-901 Biased - Clockwise
Part: 321-902 Biased - Counter Clockwise
1" Ports
Choose your option
RCV410
Remote Control Valve for RM410
Part: 431-900 Equal Power
Part: 431-901 Biased - Clockwise
Part: 431-902 Biased - Counter Clockwise
1 1/4" Ports
Choose your option
RCV510
Remote Control Valve for RM510
Part: 521-900 Equal Power
Part: 521-901 Biased - Clockwise
Part-521-902 Biased - Counter Clockwise
1 1/2" Ports
Choose your option
RCV610
Remote Control Valve for RM610
Part: 621-900 Equal Power
Part: 621-901 Biased - Clockwise
Part: 621-902 Biased - Counter Clockwise
2" Air Inlet Port / 1 1/2" Exhaust
Choose your option
RDF Underwater Lifting Units
Underwater lifting units are designed for:
- securing loads,
- transporting loads on the surface
- or dismantling ships.
With the possibility of customized design and construction, they can meet the demands of a range of markets. Not only can they assist the buoyancy of an object or ship on the surface, but they can also be employed to easily raise and lower loads underwater.
Choose your option
Regulated Vacuum Pumps
Vacuum Generators
Vacuum generators provide the required vacuum. The vacuum is generated either pneumatically (ejectors) or electrically (pumps, blowers).
Electric compact pumps are used for efficient vacuum generation and allow monitoring and control of the vacuum system.
Choose your option
Replacement Suction Plates
Clamping for Woodworking
Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.
Replacement suction plates for vacuum blocks in different sizes for various machine table systems. The top and bottom suction plates can be replaced quickly and easily.
Choose your option
Retention Tank
The flexible retention tank acts primarily as a double wall for flexible tanks. It is mainly used for liquid fertilizer tanks, oil storage tanks and fuel bladder.
Indeed, in case of a problem during the use of the flexible tank, the losses of fuels and oils are retained in the retention. Thus, the impact on the environment is minimized.
The flexible retention is a tailor-made solution. Several flexible tanks can be installed in the same retention tank depending on the dimensions.
Secondly, the retention tank can also contain rigid elements. Oil processing machines (or other fluids) as well as transformers and hydraulic systems can be installed there. During maintenance, they are isolated from their environment.
These flexible retentions are equipped with a metal frame made of galvanized steel. It is made of identical tubes and joints that make it easy to assemble. The flexible bund is easy and quick to deploy, about 20 minutes, and requires only 2 people for installation.
The retention can be accompanied by a drainage and rainwater filtration kit. This kit allows to filter hydrocarbons from the rainwater contained in the retention. Also, it allows the retention to remain empty and clean.
Choose your option
Rip-Out Diaphragm Closure
The rip-out diaphragm closure, equipped with a cruciform piercing tool, provides different functions:
- buoyancy assistance for large platforms equipped with metal floatation tanks,
- corrosion protection for electrical outlet cables.
Made from high resistance rubber coated fabric and assembled by hot vulcanization, our rip-out diaphragm closure is designed to consider:
- Leg ID
- Thickness of the leg
- Water depth
This is a solution for your oil & gas project.
Choose your option
RM004-IXA
RM004-IXA - Stainless Steel / ATEX
The standard GLOBE compact piston air motor is suitable for various applications. Due to its innovative design, the motor has a long service life, is efficient in use and low in operational cost. Unique about these micro air motors are its low speed in combination with high torque, without the use of a gearbox. The motors run oil-free and can be supplied with the following rotation directions: clockwise (CW), counterclockwise (CCW) or with a reversible rotation direction (reversible).
Choose your option
RM004-SXA
RM004-SXA - Nickel Plated Steel / ATEX
The standard GLOBE compact piston air motor is suitable for various applications. Due to its innovative design, the motor has a long service life, is efficient in use and low in operational cost. Unique about these micro air motors are its low speed in combination with high torque, without the use of a gearbox. The motors run oil-free and can be supplied with the following rotation directions: clockwise (CW), counterclockwise (CCW) or with a reversible rotation direction (reversible).
Choose your option
RM006-SFA
RM006-SFA - Nickel Plated Steel Housing / Flange Mount / ATEX
The standard GLOBE compact piston air motor is suitable for various applications. Due to its innovative design, the motor has a long service life, is efficient in use and low in operational cost. Unique about these micro air motors are its low speed in combination with high torque, without the use of a gearbox. The motors run oil-free and can be supplied with the following rotation directions: clockwise (CW), counterclockwise (CCW) or with a reversible rotation direction (reversible).