S800
BONOMI NORTH AMERICA
CHECK VALVE
High capacity, in-line spring loaded stainless steel check valve, FNPT threaded.
• Pressure rating: size 1/4” to 2” 800 WOG - 2 1/2” to 3” 600 WOG.
• 125 WSP saturated steam.
• Wide temperature range: -4°F to 210°F.
• ANSI B1.20.1 connections.
• Soft PTFE seat for bubble tight shutoff, spring loaded for fast seating action.
• Low cracking pressure 1/2 psi.
• Flow profile designed to minimize head loss.
• Perfect sealing both at high and low pressure.
• Corrosion resistant-excellent for use on chemicals.
• Dual guided stem and disc.
S800: size 1/4” to 3”.
S800FV: stainless steel FOOT VALVE - size 1/4” to 3”.
Choose your option
SAM IL - SAM PD Series
Linear Servoactuators with Servomotors Mounting Interface
Linear servoactuators with universal interface for the assembly of third party servomotors.
High precision ball screw drive, low inertia and zero backlash, extreme positioning control, excellent for applications with high dynamics and high linear speeds.
Powerful alternative to the use of pneumatic cylinders in case of high dynamics (high speed, acceleration and deceleration, frequent back and forth inversion of the movement), precise positioning and low energy consumption.
Modular structure
In-line or parallel motor mounting configuration
Motor mounting with universal interface
7 standard sizes available
Ball screw from Ø 12 mm a Ø 40 mm
Load capacity up to 46 kN
Linear speed up to 1.500 mm/s
SAM IL Series Linear Servoactuators with In-Line Motor:
Motor assembly on the mechanical linear unit with bell housing and torsionally rigid clamping coupling for a better control and precision in movement.
Motor mounting with universal interface.
SAM PD Series Linear Servoactuators with Parallel Motor:
Transmission of motion driven by high performance, efficiency and accuracy timing belt.
Motor mounting with universal interface.
Available accessories:
Electric limit switches
Wide range of fixing elements (ISO standards 15552)
Choose your option
Schmalz Handling Sets
Ready-to-connect handling set
Suitable for many major brand robotic manufactures. Each set consists of a combination of gripper, flange, and connection cable. Please inquire for more information.
Choose your option
Sealing Foams for Area Gripping Systems
Area Gripping Systems and End Effectors
Area gripping systems and end effectors are gripping systems that can be attached directly on the robot.
Schmalz sealing foams are used on vacuum gripping systems from Schmalz such as the area gripping system FXP/FMP and the area gripping system FMHD as well as on grippers from other manufacturers. The advantage of sealing foams is that you can handle different workpieces with minimum leaks using the same gripper. This allows you to move workpieces with unevenness, roughness and gaps dynamically and efficiently.
Choose your option
Sealing Profiles for Suction Plates
Vacuum Suction Cups
Suction cups and suction plates for handling flat, smooth workpieces such as glass which depend on high lateral forces. Bellow suction cups for gentle handling of, for example, automotive glass as well as handling of visible parts made of glass while leaving few marks.
Schmalz offers matching sealing profiles for suction plates specifically designed for workpieces. With these, suction plates for workpieces with special dimensions can be made. We offer sealing profiles for rough, fine and structured surfaces.
Choose your option
Sections and Connectors
Mounting Elements
Schmalz offers a wide range of mounting possibilities for integrating suction cups or special grippers into a vacuum system.
Aluminum sections and accessories form a complete modular system with which customized beams can be constructed.
Choose your option
SERIES O15
Solenoid Operators
For 2-Way and 3-Way O.E.M. applications. PeterPaul offers a complete line of miniature operators to control most media. Available up to 3/32" orifices. This line's unique design incorporates the coil and magnetic structure encapsulated completely in molded epoxy.
Choose your option
SERIES O20
Solenoid Operators
For 2-Way and 3-Way OEM applications. PeterPaul offers a complete line of operators to control most media. Available up to ¼" orifice.
Choose your option
SERIES O30
Solenoid Operators
For 2-Way and 3-Way OEM applications. PeterPaul offers a complete line of operators to control most media. Available up to 3/16" orifice.
Choose your option
SERIES O50
Solenoid Operators
For 2-Way and 3-Way OEM applications, PeterPaul offers a complete line of miniature operators to control most media. Available up to 1/8" orifice.
Choose your option
SERIES O58
Solenoid Operators
For two-way and three-way OEM applications, PeterPaul offers a complete line of low watt, miniature operators to control most media. Available up 1/8" orifice.
Choose your option
SERIES O70
Solenoid Operators
For 2-Way and 3-Way OEM applications, PeterPaul offers a complete line of large capacity operators to control most media. Available up 1/4" orifice.
Choose your option
SERIES OE20
Solenoid Operators
For 2-Way and 3-Way OEM application PeterPaul's unique, unitized design offers the advantages of simplicity of installation (unit is assembled and tested requiring no disassembly) common voltages and frequencies carry the U.L. and C.S.A. label. Approved for hazardous locations, Class I - Groups C and D (where atmosphere contains certain specific explosive gases). Class II - Group E (where atmosphere contains metallic dust), F (where atmosphere contains non-metallic combustible dust), and Group G (where atmosphere contains grain dust).
Choose your option
SERIES OE50
Solenoid Operators
For 2-Way and 3-Way OEM application PeterPaul's unique, unitized design offers the advantages of simplicity of installation (unit is assembled and tested requiring no disassembly) for common voltages and frequencies and carries the U.L. and C.S.A. label. Approved for hazardous locations, Class I - Group C and D (where atmosphere contains certain specific explosive gases). Class II - Group E (where atmosphere contains metallic dust), and Group G (where atmosphere contains grain dust).
Choose your option
SERIES OEH20
Solenoid Operators
For 2-Way Normally Closed applications where explosion-proof operators are required with high pressure ratings or inert seal requirement with bubble-tight sealing. Operator and precision press-in seat must be installed to factory specs.
Choose your option
SERIES OH20
Solenoid Operators
For 2-Way Normally Closed applications where high pressures are used - or where inert seals are required with bubble-tight sealing. Operator and precision press-in seat must be installed to factory specs. Consult factory for technical data and detail prints.
Choose your option
SJ BS Mod.B Series
Compact Design Screw Jacks
Ball screw jacks recommended for intermittent duty cycle (up to 70%)
Long life synthetic grease lubricated worm gear
High precision worm gearbox, ZI involute profile
Gearbox ratio from 1:4 to 1:36
Monobloc gearbox housing, robust and compact shape
Input speed up to 1.500 rpm
Ball screw drive, travelling nut (Model B)
SJ BS Mod.B Series Ball Screw Jacks with Travelling Nut:
11 sizes standard available
Ball screw from Ø 16 mm to Ø 140 mm
Load capacity from 5 kN to 800 kN
Choose your option
SJ Mod.A Series
Compact Design Screw Jacks
Acme screw jacks recommended for intermittent duty cycle
Long life synthetic grease lubricated worm gear
High precision worm gearbox, ZI involute profile
Gearbox ratio from 1:4 to 1:36
Monobloc gearbox housing, robust and compact shape
Input speed up to 1.500 rpm
Acme screw drive, travelling screw (Model A)
Acme screw 1- or 2-starts
SJ Mod.A Series Acme Screw Jacks with Travelling Screw:
14 sizes standard available
Acme screw from Ø 18 mm to Ø 160 mm
Load capacity from 5 kN to 1.000 kN
Choose your option
SJ Mod.B Series
Compact Design Screw Jacks
Acme screw jacks recommended for intermittent duty cycle
Long life synthetic grease lubricated worm gear
High precision worm gearbox, ZI involute profile
Gearbox ratio from 1:4 to 1:36
Monobloc gearbox housing, robust and compact shape
Input speed up to 1.500 rpm
Acme screw drive, travelling nut (Model B)
Acme screw 1- or 2-starts
SJ Mod.B Series Acme Screw Jacks with Travelling Nut:
14 sizes standard available
Acme screw from Ø 18 mm to Ø 160 mm
Load capacity from 5 kN to 1.000 kN
Choose your option
Solenoid Valves
Valve Technology
Valves are used to control the vacuum as well as the compressed air. The right valves can increase both the process reliability and the cost-effectiveness of the vacuum system.
Solenoid valves, which are controlled via electrical switch signals, are used for the control of compressed air or vacuum. These valves can be controlled directly as well as with pneumatic pilot operation.
Choose your option
Spring Plungers
Mounting Elements
Schmalz offers a wide range of mounting possibilities for integrating suction cups or special grippers into a vacuum system.
The spring plungers - components with versatile tasks: Compensate for overstrokes or height differences, soft touchdown, protect material/surface, etc.
Choose your option
Choose your option
Choose your option
Choose your option
Square / Circular / Rectangular Inflatable Jack
Inflatable jack, or lifting bag, is a pneumatic system made of elastomers or plastomers.
Filled with air, water or oil, these products are typically mounted in industrial automation systems to push, press, guide, clamp, lock, dampen, lift and handle.
Choose your option
Square Pancake® II
Interchangeable Compact Air Cylinders
Square Pancake® II
Features
- Available in a wide range of sizes
- Standard: Seven bore sizes from ¾ to 2 inches and strokes to 4 inches
- SND Series: Four bore sizes from ¾ to 2 inches and strokes to 4 inches
- Self-lubricating composite body
- Clear anodized aluminum alloy heads
- Stainless steel tie bolts
- Rod Bushing
- Standard: composite
- SND Series: bronze
- Prelubed with Magnalube-G® grease
- Chrome-plated stainless steel piston rods
- Rod end toolbar (SND Series)
- Air service to 200 psi
- Minimum Recommended Operating Pressure: 15 psi
- Temperature Ratings
- cylinder: -25° to +225° F (-32° to + 121° C)
- electronic sensors: -4° to +176° F (-20° to + 80° C)
- Internally lubricated Buna-N seals
- Many options available
- Magnetic piston sensing available
Technical Advantages
- Interchangeable composite cylinder barrel with stainless steel tie bolts and aluminum spacers that lock precision machined heads tightly into place.
- High-strength high performance composite resists corrosion, moisture and temperatures up to 325° F, while offering a high load capacity and very little friction.
- High impact resistance, minimizing failure caused by dings and dents.
- Self-lubricating cylinder wall ensures high performance thanks to a smooth interior with low coefficient of friction to minimize heat buildup, eliminate stick-slip and extend seal life.
- The hard chrome-plated stainless steel piston rod ensures long cylinder life.
- The high performance composite piston rod bearing and shaft work together to ensure high reliability: Over the cylinder’s cycle life, the composite bearing — which carries 60,000 psi — polishes the hard chrome-plated shaft.
- Magnalube G® Teflon-impregnated grease provides a long operating life and lubricates across a wide temperature range.
- Buna-N O-rings are internally pre-lubed with Magnalube-G as standard. U-cup seals are also available.
Choose your option
Standard Inflatable Pipe Plug - OPL
The standard inflatable pipe plug (OPL) is designed to temporarily or permanently plug pipes, sewers or gutters. Flexible and light, it is effective for a fast, tight and reliable sealing of the pipe.
Many sizes are available to cover pipes from 30 to 2000 mm in diameter. Thanks to these various diameters, this plugging balloon can be used in many fields: sewage networks, rainwater and wastewater with the NR range, as well as hydrocarbons and/or chemicals with the NBR range.
Moreover, the standard inflatable pipe plug is available in standard or by-pass versions. Thanks to this adaptability, it is possible to safely carry out an application such as:
Choose your option
Suction Cups for Handling Composites
Vacuum Suction Cups
Suction cups and suction plates for handling flat, smooth workpieces such as glass which depend on high lateral forces. Bellow suction cups for gentle handling of, for example, automotive glass as well as handling of visible parts made of glass while leaving few marks.
These suction plates are ideal, in particular, for handling flexible materials such as prepreg or semi-finished products made of fiber composite material. The suction areas have uniform holes added for surface vacuum distribution. The adaptable sealing ring ensures a good seal and increases lateral forces.
Choose your option
Suction Cups for Handling Glass
Vacuum Suction Cups
Suction cups and suction plates for handling flat, smooth workpieces such as glass which depend on high lateral forces. Bellow suction cups for gentle handling of, for example, automotive glass as well as handling of visible parts made of glass while leaving few marks.