1707-00AB-01.50
Model: OVLBOOST™ 44 - 1.50 in. Stroke Air/Oil Intensifier, Single End Side Porting, 7.8:1 Ratio
ATTRIBUTES:
- 7.8:1 RATIO
- 100 PSI MAX AIR PRESSURE
- SINGLE END SIDE PORTING
- PNEUMATIC DUAL ACTING
- 5/8 DIA. CHROME HYDRAULIC ROD
- 1.5 INCH STROKE
- .460 CU-IN HYDRAULIC DISPLACEMENT
Low Profile, Aluminum Extrusion Body
Model: OVB44AB1.5
Air/Oil Intensifiers convert typical shop air, 80-100 psi, into hydraulic pressure. The benefit to you is using existing shop compressed air and boosting pressure by the specified ratio to achieve the desired hydraulic force. It will potentially reduce the need for additional hydraulic caliper disc brakes for your braking application, other system components, and save money.
Choose your option
1707-00AB-03.00
Model: OVLBOOST™ 44 - 3.00 in. Stroke Air/Oil Intensifier, Single End Side Port, 7.8:1 Ratio
ATTRIBUTES:
- 7.8:1 RATIO
- 100 PSI MAX AIR PRESSURE
- SINGLE END SIDE PORTING
- PNEUMATIC DUAL ACTING
- 5/8 DIA. CHROME HYDRAULIC ROD
- 3 INCH STROKE
- .920 CU-IN HYDRAULIC DISPLACEMENT
Low Profile, Aluminum Extrusion Body
Model: OVB44AB3.0
Air/Oil Intensifiers convert typical shop air, 80-100 psi, into hydraulic pressure. The benefit to you is using existing shop compressed air and boosting pressure by the specified ratio to achieve the desired hydraulic force. It will potentially reduce the need for additional hydraulic caliper disc brakes for your braking application, other system components, and save money.
Choose your option
1707-01AB-01.50
Model: OVLBOOST™ 44 - 1.50 in. Stroke Air/Oil Intensifier, Single End Rear Porting 7.8:1 Ratio
ATTRIBUTES:
- 7.8:1 RATIO
- 100 PSI MAX AIR PRESSURE
- SINGLE END REAR PORTING
- PNEUMATIC DUAL ACTING
- 5/8 DIA. CHROME HYDRAULIC ROD
- 3 INCH STROKE
- .460 CU-IN HYDRAULIC DISPLACEMENT
Low Profile, Aluminum Extrusion Body
Model: OVB44RAB1.5
Air/Oil Intensifiers convert typical shop air, 80-100 psi, into hydraulic pressure. The benefit to you is using existing shop compressed air and boosting pressure by the specified ratio to achieve the desired hydraulic force. It will potentially reduce the need for additional hydraulic caliper disc brakes for your braking application, other system components, and save money.
Choose your option
1707-01AB-03.00
Model: OVLBOOST™ 44 - 3.00 in. Stroke Air/Oil Intensifier, Single End Rear Port, 7.8:1 Ratio
ATTRIBUTES:
- 7.8:1 RATIO
- 100 PSI MAX AIR PRESSURE
- SINGLE END REAR PORTING
- PNEUMATIC DUAL ACTING
- 5/8 DIA. CHROME HYDRAULIC ROD
- 3 INCH STROKE
- .920 CU-IN HYDRAULIC DISPLACEMENT
Low Profile, Aluminum Extrusion Body
Model: OVB44RAB3.0
Air/Oil Intensifiers convert typical shop air, 80-100 psi, into hydraulic pressure. The benefit to you is using existing shop compressed air and boosting pressure by the specified ratio to achieve the desired hydraulic force. It will potentially reduce the need for additional hydraulic caliper disc brakes for your braking application, other system components, and save money.
Choose your option
1715 - 1725
EURO-SFER
COMMERCIAL STYLE
Brass ball valve with solder ends, full port.
• Pressure rating 600 WOG-150 WSP.
• Temperature range -4°F to +366°F.
• ANSI B16.18 connections.
• Blow-out proof stem, chrome plated brass ball.
• PTFE seats, seals, and thrust washer.
• Adjustable stem packing.
• 100% electronically tested in the open and closed position at 80 psi.
• Not to be used for drinking water.
• Valve to be used in fully open or fully closed position.
1715: LEVER HANDLE - size 1/2” to 4”.
1725: T-HANDLE - size 1/2” to 1”.
Choose your option
1715 LF- 1725 LF
LEAD FREE
COMMERCIAL STYLE
Lead free brass ball valve with solder ends, full port.
• Pressure rating 600 WOG-150 WSP.
• Temperature range -4°F to 366°F.
• ANSI B16.18 connections.
• Blow-out proof stem, STL coated LF brass ball.
• PTFE seats, seals, and thrust washer.
• Adjustable stem packing.
• 100% electronically tested in the open and closed position at 80 psi.
• Valve to be used in fully open or fully closed position.
1715 LF: LEVER HANDLE - size 1/2” to 2”.
1725 LF: T-HANDLE - size 1/2” to 1”.
Choose your option
171L
EURO-SFER
COMMERCIAL STYLE
Brass ball valve, FNPT threaded, full port, with latch lock handle.
• Pressure rating 600 WOG-150 WSP.
• Temperature range -4°F to +366°F.
• ANSI B1.20.1 connections.
• Blow-out proof stem, chrome plated brass ball.
• PTFE seats, seals, and thrust washer.
• Adjustable stem packing.
• 100% electronically tested in the open and closed position at 80 psi.
• Not to be used for drinking water.
• Valve to be used in fully open or fully closed position.
171L: LOCK HANDLE - size 1/4” to 4”.
171LCR: CHROME PLATED - size 1/4” to 4”.
Choose your option
171M - 172M
EURO-SFER
COMMERCIAL STYLE
Brass ball valve, MNPT X FNPT threaded, full port.
• Pressure rating 600 WOG-150 WSP.
• Temperature range -4°F to +366°F.
• ANSI B1.20.1 connections.
• Blow-out proof stem, chrome plated brass ball.
• PTFE seats, seals, and thrust washer.
• Adjustable stem packing.
• 100% electronically tested in the open and closed position at 80 psi.
• Not to be used for drinking water.
• Valve to be used in fully open or fully closed position.
171M: LEVER HANDLE - size 1/4” to 1”.
172M: T-HANDLE - size 1/4” to 1”.
171MCR: CHROME PLATED - size 1/4” to 1”.
171MCRL: CHROME PLATED WITH LOCKING HANDLE - sizes 1/4” to 1”.
Choose your option
171N - 172N
EURO-SFER
COMMERCIAL STYLE
Brass ball valve, FNPT threaded, full port.
• Pressure rating 600 WOG-150 WSP.
• Temperature range -4°F to +366°F.
• ANSI B1.20.1 connections.
• Blow-out proof stem, chrome plated brass ball.
• PTFE seats, seals, and thrust washer.
• Adjustable stem packing.
• 100% electronically tested in the open and closed position at 80 psi.
• Not to be used for drinking water.
• Valve to be used in fully open or fully closed position.
171N: LEVER HANDLE - size 1/4” to 4”.
172N: T HANDLE - size 1/4” to 1”.
171S: BALL AND STEM IN STAINLESS STEEL AISI 316 - size 1/4” to 4”.
171NCR: CHROME PLATED - size 1/4” to 4”.
Choose your option
171N LF - 172N LF
LEAD FREE
COMMERCIAL STYLE
Lead free brass ball valve, FNPT threaded, full port.
• Pressure rating 600 WOG-150 WSP.
• Temperature range -4°F to 366°F.
• ANSI B1.20.1 connections.
• Blow-out proof stem, STL coated LF brass ball.
• PTFE seats, seals, and thrust washer.
• Adjustable stem packing.
• 100% electronically tested in the open and closed position at 80 psi.
• Valve to be used in fully open or fully closed position.
171N LF: LEVER HANDLE - size 1/4” to 2”.
171L LF: LOCKING HANDLE - size 1/4” to 2”.
172N LF: T-HANDLE - size 1/4” to 1”.
171S LF: Ball and stem in stainless steel AISI 316 - size 1/4” to 2”.
For sizes 2 1/2”, 3” and 4” see 161N LF.
Choose your option
171N LFPT
LEAD FREE
COMMERCIAL STYLE
Lead free brass ball valve, FNPT threaded, full port.
• Pressure rating 600 WOG-150WSP.
• Temperature range -4°F to 366°F.
• ANSI B1.20.1 thread Depths.
• High tensile strength forged lead-free brass.
• Blow-out proof stem, STL coated LF brass ball.
• 100% electronically tested in the open and closed position at 80 psi.
• Valve to be used in fully open or fully closed position.
• Adjustable packing-stem seals-two PTFE, and one O-ring.
• Handle-polyamide thermal plastic T style.
• Vapor barrier design, ideal for all insulated heating/chilled water piping.
171N LFPT: size 1/2” to 2”.
Choose your option
1777-0000
Use with Branham H38, H47 and H200 Caliper Disc Brakes or other Applications Requiring Hydraulic Pressure Boost.
Model: INT05BK
5:1 Air/Oil Intensifier Kit. Includes Intensifier, Check Valve, Coupling and Reservoir
Kit - Includes Intensifier, Check Valve, Coupling and Reservoir
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1777-0001
Use with Branham H38, H47 and H200 Caliper Disc Brakes or other Applications Requiring Hydraulic Pressure Boost.
Model: INT05B
5:1 Air/Oil Intensifier, Buna-N Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1777-0002
Use with Branham H38, H47 and H200 Caliper Disc Brakes or other Applications Requiring Hydraulic Pressure Boost.
Model: INT05G
5:1 Air/Oil Intensifier, EPDM Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1778-0000
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT10BK
10:1 Air/Oil Intensifier, Buna-N Seals
Kit - Includes Intensifier, Check Valve, Coupling and Reservoir.
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1778-0001
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT10B
10:1 Air/Oil Intensifier, Buna-N Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1778-0003
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT10G
10:1 Air/Oil Intensifier, EPDM Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1779-0000
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT20BK
20:1 Air/Oil Intensifier, Buna-N Seals
Kit - Includes Intensifier, Check Valve, Coupling and Reservoir.
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1779-0001
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT20B
20:1 Air/Oil Intensifier, Buna-N Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1779-0003
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT20G
20:1 Air/Oil Intensifier, EPDM Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1780-0000
Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.
Model: INT18B
18:1 Air/Oil Intensifier, Buna-N Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1780-0001
Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.
Model: INT18BK
18:1 Air/Oil Intensifier, Buna-N Seals
Kit - Includes Check Valve, Coupling and Reservoir
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1780-0002
Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.
Model: INT18G
18:1 Air/Oil Intensifier, EPDM Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1781-0000
Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.
Model: INT09B
9:1 Air/Oil Intensifier, Buna-N Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1781-0001
Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.
Model: INT09BK
9:1 Air/Oil Intensifier, Buna-N Seals
Kit - Includes Check Valve, Coupling and Reservoir.
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.