1781-0004
Use with W.C. Branham hydraulic caliper disc brake H491, H493, H962 series AND hydraulic spring applied FS38, FS47, FS200, FS400, FS500 series.
Model: INT09G
9:1 Air/Oil Intensifier, EPDM Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1782-0000
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT36B
36:1 Air/Oil Intensifier, Buna-N Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1782-0001
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT36BK
36:1 Air/Oil Intensifier, Buna-N Seals
Kit - Includes Check Valve, Coupling and Reservoir
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
1782-0003
Use with H38, H47 and H200 Non-Retractable Piston Caliper Disc Brakes and other Applications Requiring Hydraulic Pressure Boost.
Model: INT36G
36:1 Air/Oil Intensifier, EPDM Seals
Air/Oil Intensifiers convert shop air, up to 100 psi, into hydraulic pressure. Air pressure applied to the air inlet displaces a piston of pre-defined ratio which is transferred to the hydraulic fluid stored within the intensifier housing. An internal spring retracts the piston drawing in hydraulic oil from a reservoir as needed. The vented spring chamber eliminates back pressure.
Choose your option
183700
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 110, serration 90°, cylindrical centre mount - ZA 60
Choose your option
183701
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 135, serration 90°, cylindrical centre mount - ZA 115
Choose your option
183702
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 165, serration 90°, cylindrical centre mount - ZA 140
Choose your option
183703
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 210, serration 90°, cylindrical centre mount - ZA 170
Choose your option
183704
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 90°, cylindrical centre mount - ZA 170
Choose your option
183705
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 90°, cylindrical centre mount - ZA 220
Choose your option
183706
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 90°, cylindrical centre mount - ZA 220
Choose your option
183707
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 90°, cylindrical centre mount - ZA 300
Choose your option
183708
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 400, serration 90°, cylindrical centre mount - ZA 380
Choose your option
183711
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 110, serration 90°, short taper mount - KK4
Choose your option
183712
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 135, serration 90°, short taper mount - KK4
Choose your option
183713
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 165, serration 90°, short taper mount - KK5
Choose your option
183714
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 210, serration 90°, short taper mount - KK6
Choose your option
183715
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 90°, short taper mount - KK6
Choose your option
183716
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 90°, short taper mount - KK8
Choose your option
183717
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 90°, short taper mount - KK8
Choose your option
183718
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 90°, short taper mount - KK11
Choose your option
183719
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 400, serration 90°, short taper mount - KK15
Choose your option
183722
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 210, serration 60°, cylindrical centre mount - ZA 60
Choose your option
183723
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 135, serration 60°, cylindrical centre mount - ZA 115
Choose your option
183724
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 165, serration 60°, cylindrical centre mount - ZA 140
Choose your option
183725
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 210, serration 60°, cylindrical centre mount - ZA 170
Choose your option
183726
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 60°, cylindrical centre mount - ZA 170
Choose your option
183727
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 60°, cylindrical centre mount - ZA 220
Choose your option
183728
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 60°, cylindrical centre mount - ZA 220
Choose your option
183729
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 60°, cylindrical centre mount - ZA 300
Choose your option
183730
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 400, serration 60°, cylindrical centre mount - ZA 380
Choose your option
183731
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 400, serration 60°, cylindrical centre mount - ZA 380
Choose your option
183734
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 110, serration 60°, short taper mount - KK4
Choose your option
183735
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 135, serration 60°, short taper mount - KK4
Choose your option
183736
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 165, serration 60°, short taper mount - KK5
Choose your option
183737
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 210, serration 60°, short taper mount - KK6