Rohm

DURO-A

DURO-A

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

Rohm

183722

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 210, serration 60°, cylindrical centre mount - ZA 60

Rohm

183723

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 135, serration 60°, cylindrical centre mount - ZA 115

Rohm

183724

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 165, serration 60°, cylindrical centre mount - ZA 140

Rohm

183725

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 210, serration 60°, cylindrical centre mount - ZA 170

Rohm

183726

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 60°, cylindrical centre mount - ZA 170

Rohm

183727

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 60°, cylindrical centre mount - ZA 220

Rohm

183728

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 315, serration 60°, cylindrical centre mount - ZA 220

Rohm

183729

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 315, serration 60°, cylindrical centre mount - ZA 300

Rohm

183730

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 400, serration 60°, cylindrical centre mount - ZA 380

Rohm

183731

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 400, serration 60°, cylindrical centre mount - ZA 380

Rohm

183700

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 110, serration 90°, cylindrical centre mount - ZA 60

Rohm

183701

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 135, serration 90°, cylindrical centre mount - ZA 115

Rohm

183702

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 165, serration 90°, cylindrical centre mount - ZA 140

Rohm

183703

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 210, serration 90°, cylindrical centre mount - ZA 170

Rohm

183704

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 90°, cylindrical centre mount - ZA 170

Rohm

183705

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 90°, cylindrical centre mount - ZA 220

Rohm

183706

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 315, serration 90°, cylindrical centre mount - ZA 220

Rohm

183707

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 315, serration 90°, cylindrical centre mount - ZA 300

Rohm

183708

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 400, serration 90°, cylindrical centre mount - ZA 380

Rohm

183734

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 110, serration 60°, short taper mount - KK4

Rohm

183735

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 135, serration 60°, short taper mount - KK4

Rohm

183736

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 165, serration 60°, short taper mount - KK5

Rohm

183737

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 210, serration 60°, short taper mount - KK6

Rohm

183738

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 60°, short taper mount - KK6

Rohm

183739

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 60°, short taper mount - KK8

Rohm

183740

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 315, serration 60°, short taper mount - KK8

Rohm

183741

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 315, serration 60°, short taper mount - KK11

Rohm

183742

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 400, serration 60°, short taper mount - KK15

Rohm

183743

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 400, serration 60°, short taper mount - KK15

Rohm

183711

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 110, serration 90°, short taper mount - KK4

Rohm

183712

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 135, serration 90°, short taper mount - KK4

Rohm

183713

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 165, serration 90°, short taper mount - KK5

Rohm

183714

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 210, serration 90°, short taper mount - KK6

Rohm

183715

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 90°, short taper mount - KK6

Rohm

183716

DURO-A - DIN ISO 702-1

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 90°, short taper mount - KK8