Products
While we showcase many parts on our website, thousands more are available through our trusted partners.
If you're searching for a hard-to-find item or an alternative to an obsolete part, don’t hesitate to contact us—we’re here to help and will do our best to assist you.
183707
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 90°, cylindrical centre mount - ZA 300
Choose your option
183708
DURO-A - DIN 6353
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 400, serration 90°, cylindrical centre mount - ZA 380
Choose your option
183734
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 110, serration 60°, short taper mount - KK4
Choose your option
183735
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 135, serration 60°, short taper mount - KK4
Choose your option
183736
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 165, serration 60°, short taper mount - KK5
Choose your option
183737
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 210, serration 60°, short taper mount - KK6
Choose your option
183738
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 60°, short taper mount - KK6
Choose your option
183739
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 60°, short taper mount - KK8
Choose your option
183740
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 60°, short taper mount - KK8
Choose your option
183741
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 60°, short taper mount - KK11
Choose your option
183742
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 400, serration 60°, short taper mount - KK15
Choose your option
183743
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 400, serration 60°, short taper mount - KK15
Choose your option
183711
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 110, serration 90°, short taper mount - KK4
Choose your option
183712
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 135, serration 90°, short taper mount - KK4
Choose your option
183713
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 165, serration 90°, short taper mount - KK5
Choose your option
183714
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 210, serration 90°, short taper mount - KK6
Choose your option
183715
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 90°, short taper mount - KK6
Choose your option
183716
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 254, serration 90°, short taper mount - KK8
Choose your option
183717
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 90°, short taper mount - KK8
Choose your option
183718
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 315, serration 90°, short taper mount - KK11
Choose your option
183719
DURO-A - DIN ISO 702-1
Power chucks with through-hole.
Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.
The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.
Power chuck DURO-A 400, serration 90°, short taper mount - KK15
Choose your option
DURO-A Plus
DURO-A Plus
Power chucks with extra large through-hole.
The DURO-A Plus is a three-jaw chuck with an especially large through-hole, which can be actuated automatically, i.e. hydraulically or pneumatically, by a CNC machine via a cylinder. It is mainly used for turning cylindrical and disc-shaped blanks as well as for machining bars and pipes. It scores points by its very advantageous outer diameter / drill hole ratio, a reduced interference contour as well as high speeds. This makes it especially suited for efficient use in automated manufacturing. The DURO-A Plus supplements the DURO-A series with a chuck with a very large through-hole. It replaces the Röhm chuck of the KFD-HS type. The jaws of the KFD-HS fit on all chucks of the DURO-A family (DURO-A and DURO-A Plus).
