Rohm

438261

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole 85, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

438262

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole, 105, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

438263

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole, 130, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

438264

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole, 150, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

438265

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole, 200, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

443413

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 37/70 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 110, up to 45 bar

Rohm

443414

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 46/103 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 130, up to 45 bar

Rohm

443415

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 52/130 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 140, up to 45 bar

Rohm

443416

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 67/150 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 160, up to 45 bar

Rohm

443417

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 77/170 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 160, up to 45 bar

Rohm

443418

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 86/200 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 180, up to 45 bar

Rohm

443419

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 95/225 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 210, up to 45 bar

Rohm

443420

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 110/250 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 210, up to 45 bar

Rohm

443472

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 70 - Hydraulically actuated clamping cylinder without passage, cylindrical centering mount - ZA 50, up to 80 bar

Rohm

443473

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 85 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 50, up to 80 bar

Rohm

443474

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 100 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 80, up to 80 bar

Rohm

443475

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 125 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 95, up to 80 bar

Rohm

443476

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 150 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 95, up to 80 bar

Rohm

443477

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 175 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 125, up to 80 bar

Rohm

443478

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 200 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 125, up to 80 bar

Rohm

462324

HSK automatic tool clamping sets - Clamping set, high speed

Automatic HSK clamping set with guided collet, A100/B125, for higher speeds

Rohm

474917

HSK automatic tool clamping sets - Clamping set, high speed

Automatic HSK clamping set with guided collet, A80/B100, for higher speeds

Rohm

5-Axis Clamp RVM, Off-Centre Clamping

Flexible connection, optimum accessibility, precise machining, easy handling.

The RVM is a manually mechanically operated vice without power transmission for clamping all common materials.

Its solid yet slim design offers very high stability and accessibility. It is suitable for five-axis machining of a wide variety of workpieces in just one clamping. The RVM can be used in all common milling machines. It is designed as an eccentric vice.

Rohm

594332

HSK automatic tool clamping sets - Clamping set, high speed

Automatic HSK clamping set with guided collet, E25/B32, for higher speeds

Rohm

685751

Self-Centering Steady Rests - SLZN 047

SLZN - Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining.

SLZ 047, with chip protector, cylindrical rollers

Rohm

685753

Self-Centering Steady Rests - SLZN 047

SLZN - Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining.

SLZ 047, without chip protector, cylindrical rollers

Rohm

685880

Self-Centering Steady Rests - SLZ 3580

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 3580, without chip protector, convex rollers

Rohm

685881

Self-Centering Steady Rests - SLZ 1060

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 1060, without chip protector, convex rollers

Rohm

685882

Self-Centering Steady Rests - SLZ 1546

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 1546, without chip protector, convex rollers

Rohm

685883

Self-Centering Steady Rests - SLZ 5040

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 5040, without chip protector, convex rollers

Rohm

685884

Self-Centering Steady Rests - SLZ 437

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 437, without chip protector, convex rollers

Rohm

685885

Self-Centering Steady Rests - SLZ 3580

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 3580, without chip protector, cylindrical rollers

Rohm

685886

Self-Centering Steady Rests - SLZ 1060

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 1060, without chip protector, cylindrical rollers

Rohm

685887

Self-Centering Steady Rests - SLZ 1546

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 1546, without chip protector, cylindrical rollers

Rohm

685888

Self-Centering Steady Rests - SLZ 5040

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 5040, without chip protector, cylindrical rollers

Rohm

685889

Self-Centering Steady Rests - SLZ 437

Standard design with cylinder mounted at the rear for supporting slender shafts for efficient turning and end machining, primarily for heavy solid materials

SLZ 437, without chip protector, cylindrical rollers