Products


While we showcase many parts on our website, thousands more are available through our trusted partners.

If you're searching for a hard-to-find item or an alternative to an obsolete part, don’t hesitate to contact us—we’re here to help and will do our best to assist you.


Contact Us

2352 products

DASH 3 Valves

Dynamco

DASH 3 Valves

There are no moving seals in the DASH 3 valve! The DASH 3 is a metal to metal lapped spool valve. Traditional metal to metal valves can be unforgiving and require extremely fine filtration. Dynamco’s design of using dissimilar metals of different hardnesses eliminates the need.

Dynamco controls the clearances between the body and spool by individually match fitting each spool and body to achieve a proper floating air bearing. The clearance has a narrow range that every valve must achieve. The thermal expansion coefficients of the body and spool are the same so the clearance stays the same over a wide range of temperatures.

DCQC

Gimatic

DCQC

Connector for remote connection, frame side

Decentralized Ejectors

Schmalz

Decentralized Ejectors

Vacuum Generators

Vacuum generators provide the required vacuum. The vacuum is generated either pneumatically (ejectors) or electrically (pumps, blowers).

These ejectors are very different to other series due to their design. In addition to this, ejectors with active blow off function, blow off system and atmospheric ventilation make decentralized vacuum generation directly on the suction cup possible. These ejectors are known for quick lifting and depositing.

DH1905G

Gimatic

DH1905G

Parallel self-centring pneumatic gripper, 2/8 bar, M2/M3, with sleeves
DH1905G-NC

Gimatic

DH1905G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M2/M3, with sleeves
DH1905G-NO

Gimatic

DH1905G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M2/M3, with sleeves
DH2204G

Gimatic

DH2204G

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves
DH2204G-NO

Gimatic

DH2204G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves
DH2208G

Gimatic

DH2208G

Parallel self-centring pneumatic gripper, 2/8 bar, M3/M5, with sleeves
DH2208G-NC

Gimatic

DH2208G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves
DH2208G-NO

Gimatic

DH2208G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves
DH2706G

Gimatic

DH2706G

Parallel self-centring pneumatic gripper, 2/8 bar, M3/M5, with sleeves
DH2706G-NC

Gimatic

DH2706G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves
DH2706G-NO

Gimatic

DH2706G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves
DH2712G

Gimatic

DH2712G

Parallel self-centring pneumatic gripper, 2/8 bar, M3/M5, with sleeves
DH2712G-NC

Gimatic

DH2712G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves
DH2712G-NO

Gimatic

DH2712G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves
DH3508G

Gimatic

DH3508G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M3/M5, with sleeves
DH3508G-NC

Gimatic

DH3508G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves
DH3508G-NO

Gimatic

DH3508G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves
DH3516G

Gimatic

DH3516G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M3/M5, with sleeves
DH3516G-NC

Gimatic

DH3516G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M3/M5, with sleeves
DH3516G-NO

Gimatic

DH3516G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M3/M5, with sleeves
DH4410G

Gimatic

DH4410G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves
DH4410G-NC

Gimatic

DH4410G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M5/G1/8, with sleeves
DH4410G-NO

Gimatic

DH4410G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M5/G1/8, with sleeves
DH4420G

Gimatic

DH4420G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves
DH4420G-NC

Gimatic

DH4420G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M5/G1/8, with sleeves
DH4420G-NO

Gimatic

DH4420G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M5/G1/8, with sleeves
DH5512G

Gimatic

DH5512G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves
DH5512G-NC

Gimatic

DH5512G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M5/G1/8, with sleeves
DH5512G-NO

Gimatic

DH5512G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M5/G1/8, with sleeves
DH5526G

Gimatic

DH5526G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves
DH5526G-NC

Gimatic

DH5526G-NC

Parallel self-centring pneumatic gripper, normally closed, 4/8 bar, M5/G1/8, with sleeves
DH5526G-NO

Gimatic

DH5526G-NO

Parallel self-centring pneumatic gripper, normally open, 4/8 bar, M5/G1/8, with sleeves
DH6616G

Gimatic

DH6616G

Parallel self-centring pneumatic gripper, 1.5/8 bar, M5/G1/8, with sleeves

Hours

Mon - Thu 8:30am - 5:00pm

Fri 8:30am - 4:30pm

Closed Weekends

Phone

+1 905 606 2324

Email

sales@sempress.ca

Location

9-3250 Ridgeway Drive
Mississauga, Ontario
L5L 5Y6