Products

Pronal

Bladder Rupture Relay - BRR

The Bladder Rupture Relay (BRR) is associated with the STP rubber bag transformer. It is an intelligent system capable of detecting any abnormal liquid present in the preservative membrane. For example, it can detect oil in case of leakage or condensation due to a dryer problem.

• Kit contents:
  • 1 optical sensor with a 5 m cable
  • 1 connection unit
  • 1 outside control relay with LEDs
• Temperature resistance: -20°/+100°C

First, the optical sensor is placed in the compensator, through the flange. The installation can be done during the assembly or during a maintenance operation. The connection box is used to connect the sensor to the external control unit installed in the transformer’s electrical panel.

Equipped with two LEDS, the control unit allows a permanent visual monitoring. The red LED indicates the anomaly; the green LED indicates the normal situation. Thus, the BRR Bladder Rupture Relay avoids unnecessary maintenance costs and time.

Pronal

Bladder Surge Vessel - MAB

The bladder surge vessel is a compensating membrane. We always install them inside the tanks and grids under pressure. They can compensate the variation of the volume and to restrict the effects of water hammers.

Manufactured from elastomers and plastomers, this bladder surge vessel forms an interface for the protection of liquids by gases. This product is assembled by high frequency welding or by hot vulcanization in autoclave.

They are designed to:

• absorb water hammer: during a sudden closing or opening of a valve,
• soften pulsations: due to the diaphragm of a pump which generates pressure oscillations
• compensate for a pressure variation: when there is a loss of volume so the pressure can remain the same

Our compensation membranes prevent overpressures that could be harmful to the various elements of the installation.

These flexible membranes are completely watertight. We can customize them to fit the tank in which they will be installed.

Dynamco

Bleed Feed Valves

A Bleed/Feed valve acts as a 3-way, 3-position, closed center control valve, with two solenoid operators. As you can see from the pictures to the right, the Bleed/Feed valve is essentially two DASH 1 valves that have been mounted together with special porting, depending on customer requirements.

Pronal

Blivet Army - Helitank

This blivet army, also called Helitank, is perfectly adapted to the transport of fuel or water under helicopters. The slinging is instantaneous; a single ring allows the tank to be hooked under the helicopter. The cross-shaped attachment skirts provide an anti-rotation device for perfect stability in flight. All the advantages of the flexible tank are combined: lightness, flexibility and solidity.

GLOBE Airmotors

BOLT TENSIONING SYSTEMS

GLOBE Test Equipment's standard hydraulic bolt tensioning systems are built to last. These systems use oil with a very high pressure to pressurize the bolt, creating space between the nut and the flange. After this the nut can be tightened manually and when the hydraulic pressure releases, the bolt is tightened to withstand extreme conditions. GLOBE offers air or electrically driven tensioning systems. Do you have a specific requirement? Our team is ready to help.

Servomech

BS Series Screws

Gimatic

CAQC

Electric connector, female, 0/250 Vac, D-sub 15-pin VGA type, gold-plated contacts

Bilsing Automation

Carbon Fiber T-Beam

Designed for high-speed tandem presses, Bilsing Automation’s carbon fiber T-beam provides flexibility to meet varying production requirements.

Bilsing’s servo-controlled Carbon Fiber (CF) T-Beams designed for high speed tandem presses. Offering interchangeable tooling, the T-beams deliver speed and flexibility to the automotive stamping industry, where there is an increasing need to handle multiple parts produced from a single stamping die.

Bilsing Automation

Carbon Fiber Tooling

Bilsing Automation offers lighter, stiffer and more harmonically stable tools made from high modulus, graphite carbon fiber.

Bilsing produces a series of round, square and conical composite tools as well as custom profiles for specific customer needs, which can be powder-coated to any color. Additionally, special dampening layers are added to many of the Bilsing applications making the tooling even faster and more precise.

Gimatic

CBQC

Electric connector, male, 0/250 Vac, D-sub 15-pin VGA type, gold-plated contacts

Rohm

Centric Grippers

Gimatic

CEQC-A

Cable with connector, D-sub 15-pin VGA type, female, length 1.5 metres, 0/250 Vac, max 0.5 A

Gimatic

CEQC-AC

Solder connector, D-sub 15-pin VGA type, female, 0/300 Vac, max 3 A

Gimatic

CEQC-ACA

Solder connector, D-sub 15-pin VGA type, female, 0/300 Vac, max 3 A, 90°

Gimatic

CEQC-B

Cable with connector, D-sub 15-pin VGA type, male, length 1.5 metres, 0/250 Vac, max 0.5 A

Gimatic

CEQC-BC

Solder connector, D-sub 15-pin VGA type, male, 0/300 Vac, max 3 A

Gimatic

CEQC-BCA

Solder connector, D-sub 15-pin VGA type, male, 0/300 Vac, max 3 A, 90°

Schmalz

Check Valves and Flow Restrictors

Valve Technology

Valves are used to control the vacuum as well as the compressed air. The right valves can increase both the process reliability and the cost-effectiveness of the vacuum system.

Check valves close the vacuum lines of uncovered suction cups. This maintains the system vacuum. Flow restrictors constrict the vacuum line. They are used predominantly in the handling of porous parts.

Servomech

CLA and CLB Linearmech Series

Servomech

CLA and CLB Series

Integrated Cam Switches and Potentiometer

Schmalz

Clamping Equipment for 1-Circuit Systems

Clamping for Woodworking

Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.

Whether using a 1-circuit or 2-circuit system, panel processing or frame production – console vacuum blocks from Schmalz can be positioned precisely and are quick and easy to replace when changing the order.

Schmalz

Clamping Equipment for 2-Circuit Systems

Clamping for Woodworking

Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.

Whether using a 1-circuit or 2-circuit system, panel processing or frame production – console vacuum blocks from Schmalz can be positioned precisely and are quick and easy to replace when changing the order.

Schmalz

Clamping Equipment for Flat Table Systems

Clamping for Woodworking

Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.

Schmalz clamping solutions enable the quick and uncomplicated setup of CNC machining centers with flat table.

Schmalz

Clamping Equipment for Grid Table Systems

Clamping for Woodworking

Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.

Schmalz vacuum blocks for grid tables enable simple and flexible use; without complex installation. The non-slip fixings enable secure clamping of the workpieces even with high processing forces. This makes them ideal for complex five-axis applications without a wear plate.

Schmalz

Clamping Equipment for Manual Work

Clamping for Woodworking

Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.

The vacuum clamping system Multi-Clamp is the perfect tool for quick and flexible clamping of small and medium-sized workpieces. They can be fixed in any position and processed all-round. The Multi-Clamp is portable and can be used in a variety of industrial, workshop and building-site contexts.

Schmalz

Clamping Equipment for Narrow Workpieces

Clamping for Woodworking

Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.

Very narrow and curved parts can be clamped easily and reliably with mechanical clamps and Adapter-Plates from Schmalz. Narrow suction surfaces enable the precise positioning of the vacuum block along the workpiece contours, holding the workpiece in place. The workpiece is mechanically clamped firmly in place using the clamp.

Schmalz

Clamping Equipment for Nesting Table Systems

Clamping for Woodworking

Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.

Vacuum systems for use directly on the MDF wear plate of a CNC machining center with a nesting machine table.

Schmalz

Clamping Equipment for Systems from Biesse

Clamping for Woodworking

Vacuum clamping technology for wood processing is essential for efficiently setting up console table, grid table, nesting table and flat table systems.

Whether using a 1-circuit or 2-circuit system, panel processing or frame production – console vacuum blocks from Schmalz can be positioned precisely and are quick and easy to replace when changing the order.

Pronal

CLC 12T - 112373

The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.

Its thickness when empty is very low, making it easy to install in small spaces.

Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.

The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.

For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.

Pronal

CLC 3T - 112370

The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.

Its thickness when empty is very low, making it easy to install in small spaces.

Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.

The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.

For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.

Pronal

CLC 5T - 112371

The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.

Its thickness when empty is very low, making it easy to install in small spaces.

Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.

The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.

For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.

Pronal

CLC 7T - 112372

The CLC cylindrical air lifting bag can lift, and hold loads up to 12 tons. Among these important loads we find cars, trucks, agricultural machines or small planes.

Its thickness when empty is very low, making it easy to install in small spaces.

Once inflated with air, the inflatable lifting bag takes a cylindrical shape under pressure. This pneumatic cushion offers a significant lifting height up to 1 m high. This air lifting bag is the ideal solution for interventions in rough areas.

The large contact surface of the system allows the lifting force to be distributed over a larger area. The specific accessories for this range allow to secure the inflation pressure up to 1 bar.

For the lifting of larger loads, other air cushions are available, such as high-pressure air lifting bags or stack bags.

Pronal

CLT 1 - 058156

The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.

Pronal

CLT 10 - 058159

The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.

Pronal

CLT 14 - 058160

The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.

Pronal

CLT 19 - 058161

The high-pressure air lifting bag, lifts, wedges and pushes heavy loads mainly horizontally. However, its actions can also be performed vertically, for example for pipe wedging. Depending on the model, the lifting capacity of this pneumatic cushion ranges from 1 to 65 tons. The lifting stroke can be up to 500 mm high.