Lexair

Model: 431416 - 1” NPT, 4:1 Pilot Ratio

Model Number : 431416

1" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve

Lexair

Model: 431516 - 1” NPT, 10:1 Pilot Ratio

Model Number : 431516

1" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve

Lexair

Model: 434524 - 1-1/2” NPT, 10:1 Pilot Ratio

Model Number : 434524

1 1/2"" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve

Lexair

Model: 434732 - 2” NPT, 1:1 Pilot Ratio

Model Number : 434732

2" 2-way DIN Solenoid/Pilot Normally Closed Poppet Valve

Lexair

Model: 550108 - 1/2" Check Valve

Model Number : 550108

Lexair

Model: ecoPROFI

Model : ecoPROFI

Max Dia. 52mm

Bar Lengths 3m/4m/6m

Handles Round, Square, Hex, and Other Odd Geometries

Lexair

Model: ILS-MUK 100

Model : ILS-MUK 100

Max Dia. 4"

Bar Lengths 4ft/5ft

Handles Round, Hex, and Other Odd Geometries

Lexair

Model: ILS-MUK 70

Model : ILS-MUK 70

Max Dia. 3"

Bar Lengths 4ft/5ft

Handles Round, Hex, and Other Odd Geometries

Lexair

Model: ILS-RBL

Model : ILS-RBL

Parts / Shaft Loader

The ILS-RBL is an ultra-fast loading technology designed for semi-finished round parts to be automatically guided and positioned into the machine spindle, significantly increasing productivity. Suitable for counter-spindle lathes and Ideal for medium to large batch sizes. The feeding of the workpiece is carried out in one step. Short reloading times are present due to a single-piece pusher system and high traverse speeds. This machine can load material with diameters of up to 80mm / 105mm and bar lengths of 800mm / 1200mm. (other lengths available upon request)

• Minimal energy consumption; no compressed air supply required
• Large storage capacity
• Controlled via 5.7” graphic touch display
• Easy replacement of the spindle liner tubes by the radial slide of the magazine

Lexair

Model: MMRB- .750 (Multi Mini Rhinobar®)

Model : MMRB- .750

Max Dia. 20mm (.787")

Bar lengths 6ft/ 12ft

Quick change between 3 feed tubes

Lexair

Model: MRB 1.62 (Mini Rhinobar®)

Model : MRB 1.62

Max Dia. 1.62"

Bar lengths 6ft/12ft

Reliably feed 0.06" Material

Lexair

Model: PROFImat

Model : PROFImat

Max Dia. 130mm

Bar Lengths 3m/4m/6m/8m

Handles Round, Square, Hex, and Other Odd Geometries

Lexair

Model: RB-2.5 (Rhinobar®)

Model : RB-2.5

Max Dia. 2.5"

Bar lengths 6ft/ 12ft

Lexair

Model: RB-3.0 (Rhinobar®)

Model : RB-3.0

Max Dia. 3"

Bar lengths 6ft/ 12ft

Lexair

Model: SiMag

Model : SiMag

Max Dia. 130mm

Bar Lengths 2m/3m/4m/6m/8m

Handles Round, Square, Hex, and Other Odd Geometries

Schmalz

Modular Clamping System MPL-ISST-SFM for Metal and Plastics Machining

Clamping Equipment for Metal and Plastic Processing

The modular vacuum clamping systems from Schmalz can be used universally on all CNC machining centres for metalworking. Adaptation works on T-slot tables, zero point clamping systems or pre-fixing in a vice.

The modular clamping system MPL-ISST-SFM offers numerous options for clamping a wide variety of components by vacuum, making it a useful addition to any CNC machining center.

Schmalz

Modular Gripper System PXT

Mounting Elements

Schmalz offers a wide range of mounting possibilities for integrating suction cups or special grippers into a vacuum system.

The modular gripping system PXT gives you the flexibility you need to design optimal gripping systems for lightweight robots. You can design solutions for a wide range of handling processes with just a few standardized components. Thanks to the internal vacuum line, your solutions are designed for maximum flexibility and effectiveness. Assembly and conversion are simple, quick and require only a few tools.

Schmalz

Modular Gripper System PXT

Modular Gripper System

Modular gripper systems from Schmalz can be individually adapted to different workpiece geometries.

The modular gripping system PXT gives you the flexibility you need to design optimal gripping systems for lightweight robots. You can design solutions for a wide range of handling processes with just a few standardized components. Thanks to the internal vacuum line, your solutions are designed for maximum flexibility and effectiveness. Assembly and conversion are simple, quick and require only a few tools.

Bilsing Automation

Modular Tooling

Pronal

Motor Driven Pump

For fluid logistics, Pronal’s has designed a motor-driven pump.

In modular chassis, it allows the pumping of:

• Drinking water
• Waste water
• Or fuel (diesel F54, gasoline F67, kerosene F34, F35, JP8, Jet A1, avgas 100LL F18 or mono fuel F63).

Depending on the operating environment, this motor-driven pump system can be offered on a chassis, on a trailer or as a containerized solution. The thermal or electric motor of this pump drives a volumetric or centrifugal pump to ensure the required flow and pressure.

The steel (or painted aluminum alloy) frame allows the creation of light refueling, bunkering, transfer or unloading units. They are adjustable in size and flow rate (200, 400, 600, 800 and 1000 Lpm).

This motor driven water pump is used for the realization of:

• Modular secondary depots,
• Depots for field service stations,
• Tactical refueling solutions such as FARP (Forward Area Refueling Equipment) and ABFDS (Air Bulk Fuel Delivery System).

Combined with Pronal’s flexible storage and fluid transport tank solutions, these units provide high mobility for deployments.

Gimatic

MRE16180

Electric rotary actuator, 180°/90°, 24Vdc, 6 W, PNP, M8 3-pin, peak 0.9A, servo DC motor with built-in controller, Max. 0.60 Hz at 30°C, IP54, with bushings

Gimatic

MRE16180-KITU

Spare parts for gaskets, pins and screws for gripper.

Gimatic

MRE25180

Electric rotary actuator, 180°/90°, 24Vdc, 11 W, PNP, M8 3-pin, peak 1.2A, servo DC motor with built-in controller, Max. 0.91 Hz at 30°C, IP54, with bushings

Gimatic

MRE32180

Electric rotary actuator, 180°/90°, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.62 Hz at 30°C, IP54, with bushings

Pronal

Mud Wiper Seal

Mud Wiper Seals are circular lip seals designed to prevent mud rising from the seafloor. Acting as an effective “anti-mud” barrier, they prevent all impurities entering the legs of offshore platforms.

These non-inflatable toric seals are used to prepare grouting operations. They prevent mud from penetrating the void between the internal diameter of the platform leg and the external diameter of the anchor pile.

The mud wiper seal provides a mud barrier when the jacket is set on the seabed and avoids mud rising after pile driving.

Mud wiper seals are designed according to :

• Leg ID
• Pile OD

Bonomi

N500S

BUTTERFLY VALVES

CF8M SS DISC

Manually operated Wafer butterfly valves.
• Epoxy coated ductile iron (EN-GJS 400-15) Wafer body.
• N500S - sizes 1-1/2” to 24”.
• ISO 5211 direct mounting pad/square stem.
• Food grade EPDM resilient seat -30°F to +266°F.
• API 609 face to face flange.
• Floating dual shaft disc design.
• Pressure rating: 250 psi: 1 1/2”-20” and 150 psi: 24”.
• MSS SP 67 compliant.
• No pins in disc prevent potential leak points.
• NSF certified for drinking water service.
N500S: size 1 1/2” to 24”.
530S: FKM SEATS - size 2” to 24”.
540S: NBR SEATS - size 2” to 24”.

Bonomi

N501S

BUTTERFLY VALVES

CF8M SS DISC

Manually operated Lug butterfly valves.
• Epoxy coated ductile iron (EN-GJS 400-15) Lug body.
• N501S - sizes 1-1/2” to 24”.
• ISO 5211 direct mounting pad/square stem.
• Food grade EPDM resilient seat -30°F to +266°F.
• API 609 face to face flange.
• Floating dual shaft disc design
• Pressure rating: 250 psi: 1 1/2”-20” and 150 psi: 24”.
• MSS SP 67 compliant.
• No pins in disc prevent potential leak points.
• NSF certified for drinking water service.
N501S: size 1 1/2” to 24”.
531S: FKM SEATS - size 2” to 24”.
541S: NBR SEATS - size 2” to 24”.

Rohm

NC-Compact Vices

Bonomi

NCI150E

BONOMI NORTH AMERICA

CHECK VALVE

Double door wafer style check valve.
• Ductile iron body.
• Stainless steel dual disc.
• Stainless steel spring loaded.
• Pressure rating 200 psi.
• Temperature range -30°F to 250°F (EPDM seats).
• Epoxy coated body.
• Food grade EPDM or Viton seat options.
• Can be used with ANSI 125 or 150 flanges.
• Light weight and compact.
• NSF certified for drinking water service (EPDM seats only).
NCI150E: size 2” to 12”.

Schmalz

Needle Grippers

Special Grippers

Special grippers can be used for applications in which regular suction cups cannot generate a vacuum. Schmalz offers a variety of special grippers with various shapes, sizes and principles of operation.

Needle grippers reliably grip workpieces which are difficult to grip using vacuum as well as highly porous materials.

Schmalz

Non-Return Valves

Valve Technology

Valves are used to control the vacuum as well as the compressed air. The right valves can increase both the process reliability and the cost-effectiveness of the vacuum system.

Non-return valves are used to maintain the vacuum in a circuit in the case of a power failure or if the vacuum generator fails.

Gimatic

OFN20-90

Pneumatic tilt unit for small EAOTs, diameter 20 mm, 2/8 bar, M5

Gimatic

OFN20-90-KITU

Spare parts for gaskets, pins and screws for gripper.

Gimatic

OFN20-90SD

Double-acting pneumatic tilt unit for small EAOTs, Ø20 mm, 2-8 bar, M3, sensor slots

Gimatic

OFN20-90SD-KITU

Spare parts for gaskets, pins and screws for gripper.

Gimatic

OFN30-90

Pneumatic tilt unit for small EAOTs, diameter 30 mm, 2/8 bar, M5