Skip to content

Actuators

While we showcase many parts on our website, thousands more are available through our trusted partners. If you're searching for a hard-to-find item, seek an  alternative part, or require assistance with product selection, don’t hesitate to contact us — we’re here to help and will do our best to assist you.

335 products

MRE32180

Gimatic

MRE32180

2 position electrical rotary actuator - MRE

• Mechanically adjustable 90° or 180° rotation.
• Plug & play user friendly gripper.
• No electricity consumption when actuator is in position.
• No programming required.
• Guarantee of position kept in the event of power blackout.
• Brushless motor with long electric life (Brushless DC).
• Motor drive integrated in the actuator.
• 24 Vdc low voltage supply.
• M8x1, 3-pin standard connection.
• Controllable by PLC as a pneumatic valve.
• Rotation on ball bearings.
• Carbon fibre reduction system.
• Maintenance free for 10 million cycles.
• Best weight/size/force ratio.
• Compatible with MPPM electric grippers.
• Optional inductive sensors.

Electric rotary actuator, 180°/90°, 24Vdc, 23 W, PNP, M8 3-pin, peak 3.8A, servo DC motor with built-in controller, Max. 0.62 Hz at 30°C, IP54, with bushings

TORQUE (Ncm) 138
STROKE ° 90°/180°
UOM NR
Weight [Gr] 738
OFN20-90

Gimatic

OFN20-90

Pneumatic tilt unit for small EOATs series OFN - OFN

Description

• 90° rotation.
• Single-acting or double-acting operation (SD).
• Various mounting accessories available.
• Optional magnetic sensors to be mounted with external clamp SWP, or directly in the slot (SD).

Pneumatic tilt unit for small EAOTs, diameter 20 mm, 2/8 bar, M5

TORQUE (Ncm) 70
STROKE ° 90°
UOM NR
Weight [Gr] 75
OFN20-90-KITU

Gimatic

OFN20-90-KITU

Spare parts for gaskets, pins and screws for gripper.

OFN20-90SD

Gimatic

OFN20-90SD

Pneumatic tilt unit for small EOATs series OFN - OFN

Description

• 90° rotation.
• Single-acting or double-acting operation (SD).
• Various mounting accessories available.
• Optional magnetic sensors to be mounted with external clamp SWP, or directly in the slot (SD).

Double-acting pneumatic tilt unit for small EAOTs, Ø20 mm, 2-8 bar, M3, sensor slots

TORQUE (Ncm) 80
STROKE ° 90°
UOM NR
Weight [Gr] 88
OFN20-90SD-KITU

Gimatic

OFN20-90SD-KITU

Spare parts for gaskets, pins and screws for gripper.

OFN30-90

Gimatic

OFN30-90

Pneumatic tilt unit for small EOATs series OFN - OFN

Description

• 90° rotation.
• Single-acting or double-acting operation (SD).
• Various mounting accessories available.
• Optional magnetic sensors to be mounted with external clamp SWP, or directly in the slot (SD).

Pneumatic tilt unit for small EAOTs, diameter 30 mm, 2/8 bar, M5

TORQUE (Ncm) 300
STROKE ° 90°
UOM NR
Weight [Gr] 210
OFN30-90-KITU

Gimatic

OFN30-90-KITU

Spare parts for gaskets, pins and screws for gripper.

OFN30-90SD

Gimatic

OFN30-90SD

Pneumatic tilt unit for small EOATs series OFN - OFN

Description

• 90° rotation.
• Single-acting or double-acting operation (SD).
• Various mounting accessories available.
• Optional magnetic sensors to be mounted with external clamp SWP, or directly in the slot (SD).

Double-acting pneumatic tilt unit for small EOATs, diameter 30 mm, 2/8 bar, M5, sensor slots

TORQUE (Ncm) 300
STROKE ° 90°
UOM NR
Weight [Gr] 260
OFN30-90SD-KITU

Gimatic

OFN30-90SD-KITU

Spare parts for gaskets, pins and screws for gripper.

P3D1

Fabco-Air

P3D1

PancakeII Cylinders

Bore: 1/2"

Double acting, single rod end
Cylinder provides 3 positions
8 Bore sizes 1/2" thru 4"
Strokes 1/8" to 4" standard

P3D2

Fabco-Air

P3D2

PancakeII Cylinders

Bore: 3/4"

Double acting, single rod end
Cylinder provides 3 positions
8 Bore sizes 1/2" thru 4"
Strokes 1/8" to 4" standard


P3D3

Fabco-Air

P3D3

PancakeII Cylinders

Bore: 1 1/16"

Double acting, single rod end
Cylinder provides 3 positions
8 Bore sizes 1/2" thru 4"
Strokes 1/8" to 4" standard


P3D4

Fabco-Air

P3D4

PancakeII Cylinders

Bore: 1 1/2"

Double acting, single rod end
Cylinder provides 3 positions
8 Bore sizes 1/2" thru 4"
Strokes 1/8" to 4" standard


P3D5

Fabco-Air

P3D5

PancakeII Cylinders

Bore: 2"

Double acting, single rod end
Cylinder provides 3 positions
8 Bore sizes 1/2" thru 4"
Strokes 1/8" to 4" standard


P3D6

Fabco-Air

P3D6

PancakeII Cylinders

Bore: 2 1/2"

Double acting, single rod end
Cylinder provides 3 positions
8 Bore sizes 1/2" thru 4"
Strokes 1/8" to 4" standard


P3D7

Fabco-Air

P3D7

PancakeII Cylinders

Bore: 3"

Double acting, single rod end
Cylinder provides 3 positions
8 Bore sizes 1/2" thru 4"
Strokes 1/8" to 4" standard


P3D8

Fabco-Air

P3D8

PancakeII Cylinders

Bore: 4"

Double acting, single rod end
Cylinder provides 3 positions
8 Bore sizes 1/2" thru 4"
Strokes 1/8" to 4" standard


PA-26

Fabco-Air

PA-26

Bore: 2 1/2"

Multi-Power Series PA & PB

2 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PA-27

Fabco-Air

PA-27

Bore: 3"

Multi-Power Series PA & PB

2 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PA-28

Fabco-Air

PA-28

Bore: 4"

Multi-Power Series PA & PB

2 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PA-36

Fabco-Air

PA-36

Bore: 2 1/2"

Multi-Power Series PA & PB

3 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PA-37

Fabco-Air

PA-37

Bore: 3"

Multi-Power Series PA & PB

3 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PA-38

Fabco-Air

PA-38

Bore: 4"

Multi-Power Series PA & PB

3 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PA-46

Fabco-Air

PA-46

Bore: 2 1/2"

Multi-Power Series PA & PB

4 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PA-47

Fabco-Air

PA-47

Bore: 3"

Multi-Power Series PA & PB

4 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PA-48

Fabco-Air

PA-48

Bore: 4"

Multi-Power Series PA & PB

4 Stage extend, single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-26

Fabco-Air

PB-26

Bore: 2 1/2"

Multi-Power Series PA & PB

Single stage extend, 2 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-27

Fabco-Air

PB-27

Bore: 3"

Multi-Power Series PA & PB

Single stage extend, 2 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-28

Fabco-Air

PB-28

Bore: 4"

Multi-Power Series PA & PB

Single stage extend, 2 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-36

Fabco-Air

PB-36

Bore: 2 1/2"

Multi-Power Series PA & PB

Single stage extend, 3 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-37

Fabco-Air

PB-37

Bore: 3"

Multi-Power Series PA & PB

Single stage extend, 3 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-38

Fabco-Air

PB-38

Bore: 4"

Multi-Power Series PA & PB

Single stage extend, 3 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-46

Fabco-Air

PB-46

Bore: 2 1/2"

Multi-Power Series PA & PB

Single stage extend, 4 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-47

Fabco-Air

PB-47

Bore: 3"

Multi-Power Series PA & PB

Single stage extend, 4 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PB-48

Fabco-Air

PB-48

Bore: 4"

Multi-Power Series PA & PB

Single stage extend, 4 single stage retract

Strokes of 1/8" through 4" available

Original Pancake II

PFA Series

Fabco-Air

PFA Series

PFA Series

Position Feedback Cylinders

The PFA Series is an economical
pneumatic linear actuator that contains
an internal Linear Resistive Transducer
(LRT). It is ideal for applications where
traditional magnetic position sensing is
not acceptable. Additionally, the PFA
Series is conducive where variations in
cylinder stroke and speed are required
or where an application calls for
continuous position monitoring.
• Operating pressure: 150 psi max.
• Recommended Media: Filtered, clean,
dry “non-condensing” compressed air.
Do not apply any fluids that may be
electrically conductive. Water-based
fluids should not be used.