Rohm

1686259

Rohm - 1686259

Rohm

1686271

Rohm - 1686271

Rohm

443472

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 70 - Hydraulically actuated clamping cylinder without passage, cylindrical centering mount - ZA 50, up to 80 bar

Rohm

443473

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 85 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 50, up to 80 bar

Rohm

443474

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 100 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 80, up to 80 bar

Rohm

443475

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 125 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 95, up to 80 bar

Rohm

443476

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 150 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 95, up to 80 bar

Rohm

443477

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 175 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 125, up to 80 bar

Rohm

443478

FORTO-H

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-H 200 - Hydraulically actuated clamping cylinder without through-hole, cylindrical centering mount - ZA 125, up to 80 bar

Rohm

096553

LVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

LVS air-actuating cylinders without through-hole, size 85,safety device + stroke control

Rohm

096554

LVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

LVS air-actuating cylinders without through-hole, size 105, safety device + stroke control

Rohm

096555

LVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

LVS air-actuating cylinders without through-hole, size 130, safety device + stroke control

Rohm

096556

LVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

LVS air-actuating cylinders without through-hole, size 150, safety device + stroke control

Rohm

096557

LVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

LVS air-actuating cylinders without through-hole, size 200, safety device + stroke control

Rohm

096558

LVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

LVS air-actuating cylinders without through-hole, size 250, safety device + stroke control

Rohm

096560

LVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

LVS air-actuating cylinders without through-hole, size 350, safety device + stroke control

Rohm

438261

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole 85, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

438262

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole, 105, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

438263

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole, 130, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

438264

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole, 150, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

438265

OVS

Clamping cylinders without through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

OVS basic model without through-hole, 200, up to 80 bar - steel design for high speed, fastening from the rear

Rohm

443413

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 37/70 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 110, up to 45 bar

Rohm

443414

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 46/103 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 130, up to 45 bar

Rohm

443415

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 52/130 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 140, up to 45 bar

Rohm

443416

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 67/150 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 160, up to 45 bar

Rohm

443417

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 77/170 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 160, up to 45 bar

Rohm

443418

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 86/200 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 180, up to 45 bar

Rohm

443419

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 95/225 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 210, up to 45 bar

Rohm

443420

FORTO-HT

Clamping cylinders with through-hole.

For actuation of power chucks or collet chucks for hollow clamping.

Forto-HT 110/250 - hydraulic actuated clamping cylinder with through-hole, cylindrical centre mount - ZA 210, up to 45 bar

Rohm

DURO-A

DURO-A

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

Rohm

183722

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 210, serration 60°, cylindrical centre mount - ZA 60

Rohm

183723

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 135, serration 60°, cylindrical centre mount - ZA 115

Rohm

183724

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 165, serration 60°, cylindrical centre mount - ZA 140

Rohm

183725

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 210, serration 60°, cylindrical centre mount - ZA 170

Rohm

183726

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 60°, cylindrical centre mount - ZA 170

Rohm

183727

DURO-A - DIN 6353

Power chucks with through-hole.

Power chucks are chucks for cutting and/or grinding machining on machine tools or machining centers. In contrast to manual chucks, the clamping jaws are opened and closed automatically. A hydraulic/pneumatic cylinder is controlled by the machine and actuates the opening/closing mechanism of the lathe chucks.

The Duro-A is a three-jaw chuck with a through-hole that can be clamped automatically (hydraulically) by a CNC machine. It is mainly used for turning cylindrical and disc-shaped blanks.

Power chuck DURO-A 254, serration 60°, cylindrical centre mount - ZA 220